Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix OE drainage errors and mid-cycle overfilling with this dishwasher check valve. Prevents water backflow into the tub. Easy 30-minute repair for most DIYers.
So all of a sudden the dishwasher stops working, "0E error"on the panel. Did some google searches and found that it might be the filter, which I did not know needed to be changed, or worse, the motor. Took the filter off per online tutorial (easy) and mopped up all the stagnant water. Poking around, I find the small rubber check valve that has broken. Had to fish it out with tweezers. Long story short, it was not the motor and I doubt it was the filter. It was this $1.87 rubber drainage... Read more
Dishwasher not dispensing detergent or rinse aid? This detergent dispenser assembly restores proper soap release. Remove inner door panel to access.
Dishwasher not filling with water or leaking? The float assembly monitors water levels and prevents overfills. Moderate DIY repair, 1-2 hours.
I bought a new controller first and installed it. The exact replacement controller was no longer available and I had to modify two AC connectors that changed from 3 pins with two wires to two pins with two wires. This was not expected but I made it work just fine by getting the three pin connectors on the cable to fit the two pin by breaking out the center web in the board two pin and then shaving off the raised key plastic on the wires. Then on power up, I found that the wash motor did not... Read more
Replace your dishwasher's upper spray arm if cracked, broken, or clogged beyond cleaning. Installs in the top of the tub to spray water on the upper rack.
I replaced the upper nozzle guide, nozzle shaft and upper spray arm. I also replaced the pump gasket for good measure. Top rack dishes had not been cleaning properly. I first removed the filter assembly to inspect the main pump from above. It was clogged but after cleaning and reassembly I observed that while middle and bottom spray arms were changing position, the upper spray arm was not. I confirmed that water was flowing through the upper spray arm by placing some empty yogurt pots on a... Read more
Dishwasher won't start or lock? Flashing lights during cycle? This door latch assembly with safety switches fixes door sensing issues. Moderate DIY repair.
Fix incomplete draining and pulsing sounds during drain cycles. This dishwasher check valve prevents backflow. Easy 30-minute DIY repair.
First determined drain discharge hose was clear. Turned of power to dishwasher. I did not find it necessary to remove the dishwasher. I simply removed the lower service panel at the floor and was able to easily remove the defective pump, unplug it, replace the small rubber check valve flapper before the pump inlet and reinstall the new pump assembly. The dishwasher surprisingly cleans and runs quietly like new again although I found no excuse for the pump failure as it is well designed. Never... Read more
Counterbalances your dishwasher door for smooth opening and controlled positioning. Replace this spring if weakened, broken, or missing to restore tension.
I went to AppliancePartsPros.com and looked at the parts breakdown for the door. I had assumed a broken spring or cable so I found and ordered them. Having never changed them on an LG, I watched the video. I now new what to do. The hardest part of the whole job was pulling out the dishwasher to get at the springs and cables. There was enough slack in the hoses and wire to get it out without disconnecting them. Start to finish took less than thirty minutes. Read more
Fix a dishwasher with no power or won't turn on. This noise filter assembly repairs electrical interference issues. DIY-friendly repair part.
Replaced noise filter. Read more
Pivot shaft that supports and allows the upper spray arm to rotate in your dishwasher. Replace if broken, cracked, or worn to restore proper arm movement.
Dispenser not opening or leaking rinse aid down the door? This assembly restores proper detergent release. Most DIYers complete installation in 30-60 minutes.
I ordered a new vario motor and a soap dispenser. I turned off the water and the breaker, disconnected the water line and the power at the front base of the unit, disconnected the drain hose from the garbage dispenser, and pulled out the dishwasher and laid it on a blanket on its face. I unscrewed and removed the plainly visible vario motor on the bottom of the machine and removed the cam from the shaft. I then used a needle nose plier to carefully turn the D-shaft on the new motor to exactly... Read more
Rack holder secures tines on your dishwasher's lower rack. Replaces broken, worn, or missing holders. Attaches where rack rails intersect.
Replaced them. Read more
Lower spray arm assembly mounts at the bottom of the dishwasher tub and rotates to distribute wash water. Replace if cracked, clogged, or broken.
Replaced the parts per my order Read more
Replace a cracked, broken, or clogged dishwasher spray arm nozzle assembly. Installs inside the tub to direct wash water through jets for coverage.
Replace bent, broken, or missing top mounting brackets to secure your dishwasher to the countertop. Prevents shifting and tipping during use. Set of 2.
I ordered new brackets to replace the broken ones. With the new brackets the instructions also showed me how I could also secure the dishwasher to the counter from each side. I replaced the brackets and secured the dishwasher to each side of the cabinets. The dishwasher is more secure now then ever. Read more
Lower rack assembly for dishwashers. Holds dishes, utensils, and cookware during wash cycles. Replace if cracked, broken, or wheels are worn or missing.
Upper dish rack assembly for dishwashers. Holds dishes during wash cycles. Replace if rack is cracked, broken, or prongs are damaged or missing.