Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Creates an airtight seal to keep cold air in and moisture out. Replace if torn, worn, or causing the door to pop open. Confirm fit with your model.
Replaced gaskets on fridge. Read more
Protective washer that sits between the door hinge and frame. Replaces worn or missing washers that cause door sagging, dragging, or poor seal contact.
My 10 year old frig door was hanging down to the point it wasnt fully closing and sealing unless you picked up on it. I ordered a lower hinge bracket, upper and lower bearing, and spacer. My bracket was bent down a little due to my kids hanging on the door when looking at the bottom shelf and i discovered my bracket was held on by only two bolts when there was supposed to be three. I ordered a bolt too. I was able to remove the bottom hinge, remove door to replace upper and lower bearing and... Read more
Secures door handle to refrigerator door. Replace if missing, stripped, rusted, or corroded from regular use. Essential hardware for handle installation.
I ordered a replacement handle and screws. The process was very easy with the help of one of your "pros" who found all the parts needed and took my order. I didn't realize I was getting both a refrigerator door handle and a freezer door handle in one set, but now we have the freezer handle if we need it. Removing the old handle and installing the replacement was very easy. It looks great, in fact the replacement is metal, whereas the original was plastic, so it looks better than it ever did! Read more
The Icemaker Kit is an OEM part for Frigidaire refrigerators. This kit includes everything needed to install or replace the icemaker in the freezer, ensuring a steady supply of ice.
Causes of a bad icemaker can include wear and tear over time, water line blockages, electrical failures, or mechanical issues within the icemaker components. Regular use and exposure to hard water can also contribute to the icemaker's decline.
Symptoms of a bad icemaker include:
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Note: The icemaker used in this kit is 241798231 and the water valve is 242252603.
Ordered part and replaced in 10 minutes. Works great and if need future part I know where to go. Read more
Refrigerator not cooling but freezer works? Broken evaporator fan blade stops cold air circulation. Easy DIY fix in under an hour with basic tools.
Ordered the fan blade grommet and fan motor. Read more
Nylon bearing that fits on the door hinge pivot point. Replace when worn, cracked, or missing to prevent door sagging and alignment issues.
Replace your cracked or broken freezer door bin. This shelf installs on the inside of your freezer door for adjustable storage. Easy snap-in replacement.
The replacement is easy as stated in total replacement time is 25 minutes. Read more
Lower hinge bracket secures the refrigerator door at the bottom, allowing smooth pivoting. Replace if bent, cracked, or causing door misalignment and sagging.
This part number contains one (1) screw.
No trouble a 5 min. fix Read more
Fix a compressor that buzzes but won't start or runs only a few seconds then shuts off. This start relay initiates compressor operation. DIY repair.
I first determined that it was probably the starter relay due to the fact both fans would kick on and run the compressor will kick on and run for about 6 seconds before turning off so I called around auto parts stores on Google and nobody had the part so I bought it from appliancepartspros.com got it the next day install the parts which are very simple. I also bought a capacitor just in case if that was the problem. Boom, problem solved refrigerator ice cold as it should be. A happy man fixes... Read more
Refrigerator interior light won't turn on or stays on? This door light switch controls your fridge lighting. Quick DIY fix with basic tools.
Ordered switch....turned out it was the socket that was bad...ordered socket.....quick install....light works Read more
Replacement mounting screw for refrigerator panels, handles, brackets, and internal fixtures. Order when original screws are stripped, lost, or damaged.
I wasn’t sure where I could get parts for the fridge, Google brought me here. Super easy to look up model #’s and locate parts by type/location with the appliance map. I needed to change the racks and the doorstop. The racks were super simple. I would have succeeded with the doorstop too, but the holes at the bottom are stripped and the doorstop wasn’t secured correctly in the first place. So that’s frustrating, but appliance parts pros were easy to use, parts came quickly and The video from... Read more
Protective cardboard or plastic cover that installs over the internal cooling system and wiring. Replace if cracked, torn, ripped, or missing.
I had to make a few different holes in the cardboard but it worked great! Read more
Replacement lower hinge pin for refrigerator doors. Acts as a pivot point to hang and support the door. Replace if worn, broken, or missing from a move.
I ordered a refrigerator door hinge, hinge pin, and washer. The descriptions and pictures imply that these items are sold separately. However, the hinge I received was an assembly that included a pin and washer. I replaced the original hinge assembly with the new assembly, but the door still sagged (not as badly as before). I added the washer I had ordered separately and the original washer (total of 3 washers). The refrigerator doors seems to be closing properly now. I still have an extra... Read more
Secures the top of your refrigerator door to the cabinet. Replace if cracked, broken, bent, or lost during a move to restore proper door alignment.
I ordered online to AppliancePartPros.com for the fridge door hinge and after quick delivery I spent 15 minutes to securely fit the door back on the frig. I'm sure to do business again for parts if needed. Read more
Includes service line.
Had a friend who is an appliance repair tech. Replace the evaporator, the heater coil, and the filter/drier. Parts were soldered together and the compressor was put under vacuum. Then, charged with 5 oz. of refrigerant. The freezer works great now! Read more