Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement tine row pivot for dishwasher racks. Secures foldable tines in place. Order if your original pivot is cracked, chipped, or broken off the rack.
A couple of missing wheels on the lower tray and broken pivots and latches had made our dishwasher inconvenient to use. I had replaced those parts earlier using this website. A tine row pivot broke recently. As you'd expect, it's easy to snap in a new one. Dishwasher is old enough that some parts are prone to breaking. The extra parts are spares. Read more
Fix leaking dishwasher or water overflowing onto the floor. This float assembly rises with water level to prevent overfills. Easy 5-10 minute repair.
Removed front kick plate, found overflow valve assembly leaking . When parts arrived removed and replaced overflow valve. Took about 10 minutes Read more
Dishwasher won't start or buttons/lights don't respond? This electronic control board kit restores operation and cycle management. DIY-friendly repair.
Replaced control board with OEM part from ApplianceParts Pro - fit exactly and remedied the problems. Simple to replace - turn off power (circuit breaker), remove internal door panel, remove control board cover and unplug wires/LED leads (the LED lead connectors on the board have a square tension slip ring around them that hold the leads - just pull these up away from board and they will release the leads) and then remove the controller board housing. The controller board is held into the... Read more
Size: 1/4 inch hex head, 10-12 x 1/2 inch.
This trash compactor is in our vacation home. We never use it and now we are selling the house. When I looked to replace it I was amazed at how expensive a new compactor would cost. I found the serial number on the current compact entered it and your web site came up. Your schematics were excellent and made the repair very easy! Read more
Fix poor cleaning and broken spray arms with this dishwasher impeller kit. Restores water pressure and quiet operation. DIY-friendly repair.
Followed the instructions on the video you guys sent me. Read more
Fix a cracked or broken door handle that's hard to open or close. This dishwasher door handle typically takes 10-15 minutes to replace.
I installed the door latch assembly and handle. It worked fine after that. Read more
This float palnut is a push-on retainer that secures the dishwasher's water-level float to its stem. Keeping the float anchored helps the overfill protection work properly, supporting correct fill levels and helping prevent leaks from overfilling. What it does:
I first installed the inlet pump with no results. I then ordered a Control Switch and Float and Nut. This fixed the problem. Everything comes out so clean. I also replaced the filter which allowed me to clean debris around old filter. It is also easier to replace all these parts with the dishwasher pulled out and tilted on its side. I had to pull mine out to unplug power to the dishwasher. Read more
Replacement tub wheel assembly for dishwasher upper rack track. Installs on inner tub to support rack gliding. Needed when wheel is cracked or broken.
Replaced left hand rack adjuster. Read more
Leaking rinse aid or spotty dishes? Replace your dishwasher's rinse aid dispenser cap to seal the reservoir and restore proper dispensing. Simple DIY fix.
Inserted the new cap the same way the old cap was inserted and the cap worked fine Read more
Replaces cracked, broken, or missing lower access panel on your dishwasher. Covers the base opening for a finished look and shields internal parts.
12 Ft in length
Read directions on how to change the power cord and watched video on your site on how to change the drain hose. Everything went perfectly. Read more
This is the longer of the two dispenser lid hinge pins. For the shorter lid hinge pin order WPY912679.
The foam was shot on the detergent cup lid. Hard as a rock. Causing caking problems, dribble down the inside wall of the door and leaving lumps of detergent. Cut the door in half wit aviation snips and pulled out the two halves. Discovered at this point that the spring had gone soft. Bought one ahead of time, so I was set. Put the spring on the left pin, put the spring pin in the door, slipped the door into place (open) and put the right pin in with pliers. Door snaps open now. Read more
Secures access panels and covers to your dishwasher cabinet. Replace this screw if stripped, corroded, or missing to keep panels tight and secure.
I custom cut out a plastic washer to hold the worn screw in place. For months, I added a small strip of duct tape to the screw's threads, which would often stay in tact for a few days. But eventually, the tape would heat up and the adhesive and moisture would cause the spray arm to detach. I found the replacement screw on your web site, and ordered it. The screw was a perfect match and now the spray arm works the way it should. I stil use the plastic washer I made, since the flange replacement... Read more
Includes vinyl rack repair touch up paint and tine tip covers. Color: Grey
Complete dishwasher installation kit with mounting brackets, screws, and clamps. Replace missing or damaged hardware for secure undercounter installation.
Added brackets Read more
This is the shorter of the two dispenser lid hinge pins. For the longer lid hinge pin order WP6-912678.