Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Mdb875oawb Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Dishwasher Convertible Tines Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002750

Replacement convertible tines kit for dishwasher racks. Includes tines and clips. Replaces broken, cracked, or missing tines that no longer hold dishes.

Do-It-Yourself Stories from Customers like You Leaking from the bottom corner   Jack W. • Cary , NC • July 12, 2015

After talking with the rep from appliance pro, she helped me verify wat I needed, everything came as we discussed. After removing the inner door the vent assembly was difficult removing, it does unplug, do not twist it off, had to replace that piece as well. Had to cut of notch on inner door for the vent assembly to reseat properly. It does twist off, just a bear to put back on. once all assembled turned the machine on and no more leaks. Saved a bundle from calling the appliance repair guy. Read more

More
Dishwasher Air Water Inlet Seal
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99002150

Seals the air/water inlet where it meets the tub to prevent leaks. Replace if you notice water dripping during cycles. Confirm fit with your model.

Do-It-Yourself Stories from Customers like You Dishwasher leaked every time it ran   John S. • Morgan , NJ • January 16, 2018

Replaced the seal at the Air/Water inlet and also replaced the drain hose. Drain hose had a worn spot due to vibration rubbing on the floor Read more

More
Upper Wash Arm
Genuine Whirlpool part
By: Whirlpool
Part Number: WP6-917644

Color white. The wash arm measures about 11 inches, and the retainer about 3 inches.

Do-It-Yourself Stories from Customers like You Heard intermittent grinding noise for maybe five seconds after it switched from fill to wash then later in cycles also   David J. • Appleton , WI • March 15, 2015

Spun each of the three wash arms by hand. All could be made to touch/scrape but the top one was super wabbly. Ordered both the arm and clip. Repair took less than a minute. Used a screwdriver to pry loose one side of the old clip to remove. Aligned the new parts and easily snapped into place. Read more

More
Dishwasher Lower Rack Convertible Row Tine
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99003496

Lower rack fold-away tine row for dishwasher. Replace when tines rust, break, or no longer fold properly. Verify fit with your model number listed.

Do-It-Yourself Stories from Customers like You The tines rusted   Don G. • Murray , UT • December 13, 2015

Replaced the tines. It was a piece of cake! Read more

More
Dishwasher Adjustable Tine Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99003527

Adjustable tine clip secures and positions tines on dishwasher racks. Replace when broken or missing to restore proper dish support. Verify fit by model.

Do-It-Yourself Stories from Customers like You Dishwasher rack had broken parts.   Thomas R. • Fort Collins , CO • January 11, 2019

Ordered parts from online schematic for my model. Very helpful. Read more

More
Dishrack Adjuster
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10153534

Right hand side. For the left hand side order WPW10153533.

Do-It-Yourself Stories from Customers like You Glide wheel broke off dishwasher rack   Martijn V. • Clinton Twp , MI • June 28, 2016

New part was ordered and replaced on dishwasher rack. Read more

More
Drain Pump O Ring
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99002857

 

This part fixes the following symptoms
  • Will not drain
See more...
Do-It-Yourself Stories from Customers like You The drain pump was not working properly   Michael F. • Mountain Ranch , CA • January 28, 2015

I ordered the part from you which amazingly showed up less than 20 hours after I ordered it. I then watched a video you produced about replacing the part. Between those two things I had my dishwasher up and running withing 36 hours of talking to your rep. Read more

More
Dishwasher Panel Mounting Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY912620

Replacement screw for securing dishwasher door panels, inner liners, and internal brackets. Needed when original screws are stripped, missing, or damaged.

Do-It-Yourself Stories from Customers like You Door latch on my dishwasher was broken   William H. • Columbia , SC • January 26, 2018

Ordered the part from AppliancePartsPro's, watched the video, new latch works perfect. I've repaired several appliances in my house by diagnosing simple problems going to AppliancePartsPro's diagram's, ordering the part and installing myself. Never had any problems. The bearing in the back of the dryer was tricky but worked great. Keep track of all parts when you disassemble and assemble in reverse order. Taking photos as you disassemble helps for referencing if you get stumped. Read more

More
Control Board Housing (Base)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99002576

This control board housing secures and protects the washer's electronic control board, keeping circuitry stable and shielded from moisture and debris for reliable operation. It fits into the console area and supports proper control panel alignment. What it does:

  • Holds and protects the electronic control board inside the console from impact, dust and moisture.
  • Keeps the control board properly positioned for reliable electrical connections.
  • Helps prevent control panel wobble or misalignment that can cause button or dial issues.
  • Commonly replaced when housing is cracked, broken mounting tabs fail, or board access is needed.
What's included:
  • 1 control board housing
Install notes:
  • Disconnect power and water to the appliance before beginning any repair.
  • Handle the control board and housing carefully to avoid damage to connectors or circuit components.
  • Use appropriate tools to remove console components; replace damaged mounting tabs and secure all fasteners.
  • Discharge any capacitors and follow the board manufacturer's ESD/safety recommendations.

More
Inlet, Air/Water
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99003028

 

Do-It-Yourself Stories from Customers like You Leaking during cycle.   Heather W. • Wind Gap , PA • April 13, 2018

Replaced gasket. Read more

More
Baffle
Genuine Whirlpool part
By: Whirlpool
Part Number: WP6-919119

 

Do-It-Yourself Stories from Customers like You Leaked.   Harrison I. • Salem , OR • July 05, 2020

Replaced pump and filter. Read more

More
Flapper, Drain Pump
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99002815

 

Do-It-Yourself Stories from Customers like You Leaked.   Harrison I. • Salem , OR • July 05, 2020

Replaced pump and filter. Read more

More
Electronic Control Board
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10218826

 

Do-It-Yourself Stories from Customers like You The dishwasher control panel looked normal but the dishwasher would not start the panel went through the cycle as if it had a normal wash but it did not washed   Bill D. • Cumberland , RI • January 15, 2016

I verified the door interlock switches and the float switch in the base tub, all verified so I ordered the main electronic board, The board arrived and I installed it and everything is working great. Read more

More
Trim, Corner Edge (L
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99003038

 

More
Convertible Rear Rack Tines (Rear), Set
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99003497

These convertible rear rack tines replace bent or broken prongs on the dishwasher's rear rack to help keep plates and bowls upright and prevent shifting during cycles. Durable molded tines restore rack function without replacing the entire rack. What it does:

  • Holds dishes, plates and bowls upright in the rear section of the lower rack
  • Replaces missing, bent or broken tines that allow items to tip or tumble
  • Restores the rack's convertible configuration for different dish loads
  • Fits into existing rack sockets for a secure hold during wash cycles
What's included:
  • One set of convertible rear rack tines as shown
Install notes:
  • Remove the lower rack to access and replace the rear tines; press into existing sockets until fully seated
  • No electrical work required; follow OEM rack-removal instructions if needed
  • Use caution for sharp edges and wear gloves if necessary
  • Do not force parts—confirm correct orientation before installing

Do-It-Yourself Stories from Customers like You I had broken tines inside our dishwasher.   Thomas T. • Wilson , NC • November 13, 2018

By ordering the replacement parts. Parts were perfect fit. Read more

More
Outer Door Panel
Genuine Whirlpool part
By: Whirlpool
Part Number: 6-917696

Color: Stainless steel

Do-It-Yourself Stories from Customers like You Needed updating with stainless steel   Carolyn K. • Trinity , NC • October 25, 2014

I used stainless front panels on the Maytag and Bosch dishwashers and also the Jenn-air trash compactor. They look great and wish I had updated sooner. Shipping for fast and wrapped well. Read more

More
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google