Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Side mounting bracket kit secures your dishwasher to adjacent cabinetry. Replace missing, damaged, or broken brackets for stable installation.
I haven't yet started to place the dishwasher in place is Read more
The Nut is an OEM part for Whirlpool dishwashers. This nut secures the float switch, a key component in regulating the water level within the dishwasher. The float switch ensures your dishwasher does not overfill by triggering the water to stop once it reaches a certain level.
Over time and with regular use, the nut that holds the float switch in place can become loose or damaged. This could potentially allow water to seep through gaps, leading to leaks, or could cause the float switch to malfunction, affecting the dishwasher's ability to regulate water levels accurately.
Symptoms of a faulty Nut include:
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Ordered 6 parts from you thanks to your fantastic web schematic parts diagram received parts very fast changed parts easily and that leak stopped. Your company is a 5* operation hands down. Read more
Replaces cracked, mineral-clogged, or punctured feed tube that routes water from lower manifold to upper spray arm. Includes rubber grommets and fittings.
I replaced the rear tube that feeds water to the top and middle spinners, and this appears to have fixed the problem. The middle spinner, which is attached to the bottom of the top rack, has a tube that connects to a hole in the middle of the rear tube.This hole has a rubber flap and I noticed that this flap was wide open. The tube under the tray has a straight edge protruding from it at the back. This edge pushes the flap open and I suspect that when the water is flowing, this edge rotates... Read more
Dishwasher leaking from underneath? The float switch kit controls water level and stops overfilling. Typical repair time 10-30 minutes.
Removed bottom cover, located leak at float switch, removed and replaced float switch kit. The toughest part of the repair was removing the Float & Retainer Assembly (in the interior of the machine tank) which broke when I pushed it back and pulled it straight up as suggested in the service manual. The Float Switch Kit (attached to, and below the float, below and outside the tank) has a folding plastic cover which fastens with plastic clips. If you open the switch kit before removing the... Read more
The Hose Clamp is an OEM part for Whirlpool washing machines. This clamp secures the hose in place, ensuring a tight connection and preventing leaks during operation. It is essential for maintaining the integrity of the washing machine's water system, securing hoses that carry water to and from the washer.
Common causes of a bad hose clamp include rust, physical damage, or loosening from repeated tightening and loosening.
Symptoms of a bad hose clamp include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.
We ordered parts from appliance parts pros and I fixed it. Read more
Central hub that secures the lower spray arm in your dishwasher. Replace if cracked, broken threads, or wobbly spray arm. Includes installation video.
Chopper screen was completely blocked. Chopper blades separated from the shaft. Retainer ring came off of the shaft but was able to re install the chopper assembly. Worked fine after cleaning the screen and reassembly the lower spray arm. Lower spray arm hub tab broke when removing so purchased a new one with a new bearing. Appliance Part Pros video was excellent and very helpful. Read more
Lower spray arm rotates and distributes water throughout the dishwasher during wash cycles. Replace if cracked, clogged, broken, or missing parts.
Simple, took 2 min to remove then reinstall the new sprayer. Read more
Black plastic access panel that covers the bottom front of your dishwasher. Replace if cracked, broken, scratched, or missing to restore appearance.
Just slipped the kick plate into place and used screws to secure it. Very easy. I'm a realtor and tackled this for my elderly client. Shipping was quick. From ordering to installing was less than a week. Read more
Seals the water inlet connection to prevent leaks where water enters the dishwasher tub. Replace if you notice moisture damage or leaking at the valve inlet.
Dishwasher washer would not drain after hearing glass-like particles during the drain cycle despite trying to clean the cylinder filter. Originally suspected the drain motor was damaged. After watching a video on how to replace the drain pump, I carefully energized the dishwasher (from water and electricity) then removed the dishwasher to take a look. After removal of drain hose from the pump, discovered that drain hose was connected to water inlet assembly which also needed removal to... Read more
Middle spray arm for dishwashers. Installs in the center of the tub to distribute water during wash cycles. Replace if cracked, broken, or spray holes are damaged.
I called to ask about the correct gasket for the door. As VERY helpful lady suggested that it was probably a split arm spray. She was absolutely correct. I have used you web site for parts in the past and will always make it my first stop when ordering appliance parts. Read more
Replaces a cracked, broken, or worn dishwasher water feed tube. Directs water from the pump to the upper spray arm for proper wash cycle distribution.
I got on appliance parts pros website, looked up my model number. Using their diagrams I found my part. Ordered it and replaced it, just like the new one. Read more
The water manifold probe monitors water flow in your dishwasher's spray system. Replace if bent, melted, cracked, or broken to restore proper water distribution.
Ordered necessary parts. Parts were received the next day!! Read more
Screw secures appliance panels and access covers. Replace missing, stripped, or corroded screws to restore tight fit and eliminate rattles or gaps.
After several attempts at Local Hardware stores and Lowe's and Home Depot to find them I called AppiancePartsPros.com. I gave them the model number and what I was looking for and customer service directed me to the part on the Web site. They were extremely helpful and it was very fast and I got the parts the next day. Read more
Dishwasher won't turn on or start? A faulty control board often causes no power, flashing lights, or incomplete cycles. Moderate DIY repair.
After looking for solutions online and watching some short videos, we decided to open the dishwasher up and try to fix it ourselves. We opened it up and found the circuit board had burned out causing a horrible odor. We ordered our new board, popped it in and we now have a working dishwasher. Hooray! Read more
The Spring Tension Hose Clamp is an OEM part for Whirlpool washing machines. It is designed to secure hoses in place, preventing leaks by maintaining consistent tension on the hose connections.
Over time, spring tension hose clamps can lose their effectiveness due to metal fatigue, corrosion, or damage from frequent tightening and loosening. This can lead to leaks and improper hose connections.
Symptoms of a bad spring tension hose clamp include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Took off cover, installed new parts. Read more
If your detergent dispenser is loose or falling off, this bracket secures it to the door panel. Moderate DIY repair requiring door disassembly.
Pulled a video from online and ordered my parts from Appliancepartspros.com. This was the second repair I've done with your help, the last being my washing machine. This time I replaced the dishwasher detergent dispenser on my Kitchen Aid. You guys make it so simple and give me the confidence to do it myself! Read more