Mgrz5755qds Parts

I replaced all three baffles since the new one was a different design than then old one. i watched the video and the repair went well, except for hitting my hand with a hammer while removing the old baffles. went just like the video said it would Read more

I ordered the burner cap set. Read more

• Gas smell

Some stoves/ovens are not suppose to be cleaned under the top! So I ordered the supply lines, from APP. I received the parts quickly, and promptly installed them. Read more

Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more

Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more

After researching on the internet I found I needed a new oven temperature sensor, and this site had the fastest delivery and a great price! I also like the videos telling you how to do the repair. My husband is the handyman, but has too many projects on his plate and the repairs looked simple. I did the temperature sensor all by myself when he wasn't even home, and the light socket replacement I only had trouble taking the old part out, so my husband pulled it out for me, but I did all the... Read more

Bought and installed new hinges. Repair took about an hour but I also cleaned all the glass inside and out on both oven doors. I had ordered extra screws as I read the old ones that hold the hinges were hard to get in as they were self taping but the screw labeled 5 next to the hinge were not the right ones. All old screws worked fine. You just need to put a little power to them to get them started. Easy repair. Read more

I had to take out the bottom drawer that holds pans. Disconnect the power and pull the oven out. Removed door, rear panel that held the screws for the side panel and lift up and out the side panel. After that it was straight forward as to replacing the hinge. Spent more time cleaning the florr where the oven was than installing the hinge. Read more

Troubleshot the oven by checking the broiler which worked good (same fuel valve). After reading the some tips about troubleshooting the Glow Ignitor I could see the broiler ignitor got white hot and the oven ignitor only got bright orange (orange to red causes intermittent ignition or mini explosions). Watched the how to video and it was good information. You should be observant about which openings in the back of the oven as to where the two wires are coming out of. My oven is over 12 years... Read more

Your part was a perfect replacement. Fixed in 30 minutes. Read more

I ordered a new door glass from appliancepartspro.com it came within two days, but I forgot to order the 8 pieces of foam tape, assuming it would also be included in with the order, it wasn't, so after waiting for that to arrive, it was fairly easy, job after watching the video. However, the video doesn't tell you the painted side goes on the inside, or that the single sided foam tape goes on the top, and the double sided foam tape goes on the sides, I figured that out from the diagram on my... Read more

Replaced the lines, however the model maytag I was working un is a poor design. When you lift the top up to access the lines, you are putting pressure on the gas lines. If you lift it up, then down several times; then you risk bending the tubing and it will break. My recomendation is for do-it-yourselfers to lift it, install it, and close it in one step so you don't bend or break the lines again. Hope this helps. Brian Read more

It was pretty easy to fix once I received the parts, just lined up the handle and tighten the screws in the door. Parts were an exact match. It would have been nice to have a tutorial or instructions with the individual pieces to confirm putting the right pieces together. Read more

I replaced all 4 ignitors and new clips. Read more

Could not level stove. Front leveling legs had pieces broken out where leg contacted floor. Back leveling legs were worn and did not stay at corrected height when stove returned to full weight on floor. Replaced both front and back leveling legs, and stove was able to be leveled. Also bought Touchup Paint for numerous nicks and scratches - color matched perfectly. Read more

Purchased the triple burner and dual burner element. I added my model of stove and I was able to pull up diagrams of the stove parts. The parts were easy to find using the diagrams and the burner elements were marked 17 & 15 so I placed my order. Parts were here in a couple of days. The tricky part was figuring out how to get into the stove top. I was a few youtube videos to see different replacement. My husband and I got the stove top off and flipped it over on the counter. We looked at... Read more