Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Captures grease, smoke, and odors from cooking to maintain clean kitchen air. Replace when clogged or discolored despite cleaning. Confirm fit with your model.
I bought a house that had an old (but serviceable) Kenmore microwave over the stove. When I cooked on the stove the poor microwave filters couldn't do their job and the whole house got stunk out.. I drove to Sears who didn't stock them. I went online to Sears.com and they didn't stock them either. Then I found AppliancePartsPros.com and they had everything really cheap!! I ordered them and immediately replaced the grease filters with no tools. I looked at the schematic drawing for the... Read more
Removes cooking odors, smoke, and grease from recirculating microwave vents. Replace when odors persist despite cleaning. Confirm fit by model number.
When Microwaving food, the display panel would seem to act normal, but the typical microwave sound would be absent. No microwave action would occur. Eventually an F5 code would display. Problem was the upper door switch. Found it by opening up the cabinet, removing the display panel (1 screw and a couple of plugs) and testing all three micro switched with a meter. Two switches are for the door and one for some kind of ventilation flap. They are all in the same area. Go to YouTube to see... Read more
Holds the damper assembly in place inside the microwave cavity above the wave stirrer. Replace if bracket is bent, broken, or missing during installation.
Needed installation parts. I ordered the parts from the company I purchased the appliances from. A week went by and no parts, called, emailed and called again to find out when the parts would arrive to be able to Re-schedule the installation. After the run around, I found AppliancePartsPros website and placed my order with them. I received the parts I needed within the time they promised. I was able to schedule my installation to enjoy my new appliance. It's been almost 4 weeks and still no... Read more
The Time Delay Fuse is an OEM part for LG microwaves. This fuse provides a safety mechanism by delaying the flow of electricity, protecting the microwave's electrical components from power surges and ensuring the appliance operates safely. It helps to prevent immediate damage in the event of a power surge or electrical fault, thus prolonging the lifespan of the microwave.
Over time, the time delay fuse can become damaged due to electrical surges, wear and tear, or faulty connections. If the fuse blows, it can disrupt the microwave’s ability to function correctly.
Symptoms of a bad time delay fuse include:
This OEM LG part is also compatible with Sears/Kenmore models.
Called AppliancePartsPros because of good experiencing diagnosing problem with a dishwasher repair. We definitely are modest income amateurs! Same excellent response to our questions. Three possible causes. Used easy search menu to fine replacement parts. Bought all three, knowing that if all not needed, the others could be returned (within 365 days) for refund. Replaced the capacitor successfully after calling to get more help with a couple of places where we got stuck. Oven now works... Read more
Microwave won't heat but runs normally? A failed magnetron is the likely cause. This part generates the microwaves that cook food. Moderate DIY repair.
My son told me that almost all the microwave ovens that came into the repair center he worked at, 15 years ago, had a defective magnetron. I ordered a magnetron, and sat back until one shipped. The one that came, the first time, was in a small factory cardboard box, which was in a large bubble-pak Fedex envelope; which didn't show any signs of abuse. Inside, however, the factory box was beat up. Removing the magnetron, I noticed that the socket, as well as its' pins, was bent, and loose in the... Read more
Exhaust damper for microwave venting systems. Installs on rear exhaust to regulate airflow. Replace if cracked, broken, missing, or not sealing properly.
Metal mounting plate for over-the-range microwaves. Installs between wall/cabinet and microwave unit to anchor and stabilize. Replace if missing or damaged.
Microwave door won't stay closed or latch? This door latch spring provides tension to secure the door shut. DIY repair in under 10 minutes with video help.
Ordered door latch part and new spring. You Tube video helped me identify what I needed. I tried the fix recommended and it didn't work so I ordered the parts. It took less than 5 minutes to switch out the old for the new. If the door doesn't latch, you can't run the microwave and it's key. It wasn't an expensive or hard fix to get my microwave up and running again. So pleased with AppliancePartsPros for having what I needed and being reasonable about pricing. Turnaround time was excellent! Read more
The Interlock Door Switch is an OEM part for LG microwaves. It is a safety component located on the door of the microwave designed to prevent the microwave from operating unless the door is securely closed. The interlock door switch works with the microwave's electronic control board to sense when the door is open or closed and allow or disallow operation accordingly. Causes of a bad interlock door switch can include normal wear and tear from repeated opening and closing of the microwave door over time. Symptoms of a bad interlock door switch include:
This OEM LG part is also compatible with some Sears/Kenmore microwaves.
Knowing the odds of 2 failures occurring at the same exact time was unusually high, I just searched your site for what other broken items might affect these two failures. Came up with next control item upstream and tallied that item failure with percentages of successful repairs, (4 mins.) door safety switch. Since I had to change out the most likely of the 3 and since I was already was going to be into the switch panel I ordered all 3 and swapped them all out to cover my butt, as they were... Read more
Turntable won't spin or rotates unevenly? This microwave turntable motor restores smooth rotation. Easy DIY repair—most complete it in under 10 minutes.
Removed 8 screws from bottom panel on microwave. Pulled two prong plug off old motor. Read supplied voltage off motor decal and tested for it. Deemed motor to be bad and changed it. Works great. After tearing old motor apart it seems a liquid got in there from inside microwave. No seal on motor. Bad design flaw in my opinion. Read more
The Locker is an OEM part for LG microwaves. This part secures the microwave's hood in the desired position, whether it's slid out for venting or retracted for a sleek appearance.
Causes of a bad part can include mechanical wear from repeated use, physical damage or impact, or issues with the internal mechanisms that control the locking mechanism.
Symptoms of a bad Locker include:
This OEM LG part is also compatible with some Kenmore models.
Disconnected power cable. Took off 8 screw from bottom of vent tray. Lowered tray to rest on a 12 in. bucket set on top of my elec. range and disconnected electrical clip from broken Vent Lock. Punched out the Vent Lock and inserted the new Vent Lock. Pushed to close and open the vent on the newly installed Vent Lock - problem solved. Read more
Replacement glass turntable tray for your microwave cavity. Sits on the roller support and rotates food during heating. Order if your tray is cracked or broken.
Bought new turntable. Read more
The Door Lock holder assembly is an OEM replacement part for LG microwaves. It is a component responsible for securely holding the microwave door in place and locking it closed. The door holder assembly works with other components like the door hinges and latch mechanism to provide a tight seal when cooking or warming food items.
Causes of a bad holder assembly can include wear and tear from frequent use, physical damage from slamming the door, or misalignment affecting its ability to lock the door.
Symptoms of a bad holder assembly include:
Replaced the holder assembly with 3 switches assembly. I am a retired GE appliance dealer. Read more
Microwave not heating or making loud buzzing noise? The high voltage diode regulates power to the magnetron. DIY repair typically takes 30-45 minutes.
LG Help-line said probably a failed magnetron, but since out of warranty,referred me to an authorized LG repair service. They wanted $79.95 service call to come out & diagnose problem. I ordered replacement magnetron for less than cost of a service call, Plus the part was delivered next day! Works like new again. Happy wife = happy life! Notes for DYI-ers: 1.Be careful removing over the stove microwaves--get help,they are heavier than you think. 2.Unplug microwave for 48 hrs, carefully... Read more
The Locker is an OEM replacement part for LG microwaves. It is a metal hook located on the side of the microwave door that securely fastens the gasket and seals when closed. The door hook ensures a tight compressive fit of the door gasket all around the perimeter of the door opening.
Symptoms of a bad door hook include:
Causes tend to be normal wear over time, like dulling or bending of the thin metal hook. Impact or over-tightening could potentially damage or deform the hook.
This part is also compatible with Sears/Kenmore microwaves.
Replace door latch Read more
Protective shield that covers internal components on the microwave door. Replace if cracked, broken, or tabs have snapped off during handle or latch repair.
Careful placement of new screws into the inside of the outer door that now hold the frame assembly to the door secured the frame assembly to the outer door. All of the other parts I bought and replaced were a waste of money. I figured since I had them I might as well install them anyways. Easier than sending them back since I had the whole thing apart anyways. The part I really needed was no longer available, the outside door. The glass reinstalled into the retainers in the door without a... Read more