We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Washer Lid Screw is an OEM part for Whirlpool washing machines. This 6-32 x .340 screw secures the washer lid to the hinge assembly, ensuring the lid opens and closes smoothly and stays securely in place during operation.
Causes of a bad washer lid screw can include wear and tear from frequent use, corrosion due to exposure to moisture, or damage from over-tightening or mishandling. A compromised screw can lead to issues with the lid's stability and functionality.
Symptoms of a bad washer lid screw include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
I just replaced the glass lid and broken plastic frame with the all metal one. Call 877 477 7278 for appliancepartspros and order the following Whirlpool parts (prices as of November 2016): 1 lid part number WP8572026 (AP6013408) for $119.81 2 hinges WP8563964 (AP6004844) for $6.17 each 4 screws WPW10119828 (AP6015313) for $1.97 each Total $140.03 plus $8.95 shipping, grand total $148.98 Note that it does not say that this lid will fit model 7800, but the lid will fit this model. The... Read more
Most orders arrive by Wednesday, November 25
The Console Clip is an OEM part compatible with Whirlpool dryers. This clip secures the control console assembly to the top panel, ensuring it is firmly mounted during operation. Properly functioning clips are necessary to maintain the correct alignment of controls and prevent detachment.
Causes of a bad clip can include wear and fatigue from repeated opening and closing of the dryer door. Excessive force or impact could also bend or break the clip over time.
Symptoms of a bad clip include:
This OEM Whirlpool replacement clip is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
I read the FAQ section of Appliance Pros parts web site. I found out I needed to replace the temperature control switch, WPW10248240, to correct my problem. This switch also controls the tub filling water level based on air pressure via the attached vinyl tubing. I ordered the switch and the tubing, WP353255, in case mine was no longer any good, and I also ordered the retaining clips for the control cabinet, (2) of WP8312709, because they can be damaged when accessing the controls. My new... Read more
This 8-18 x 5/8-inch screw secures dryer panels, brackets, and covers. Replace missing or stripped fasteners to restore a tight fit and stability.
I put all pieces that I ordered on the dryer and plugged it in. Read more
Fix fabric softener not dispensing or a cup that flies off during spin. This washer dispenser cup snaps onto the agitator. DIY-friendly replacement.
With the parts we ordered. Read more
Replacement leveling foot for washers and laundry centers. Threads into the base to adjust height and stabilize your appliance. Needed when broken or missing.
Bought a new one and screwed one on. Read more
This replacement screw secures panels, brackets, and other components in your appliance to keep them aligned and rattle-free. Replacing worn, stripped, or missing hardware restores a tight fit and helps maintain safe, quiet operation.
I ordered two replacement baffles and screws, then lifted the top of the dryer to access the drum and installed the two new baffles. Read more
If water leaks from your washer tub area, the tub ring may need replacement. This internal gasket seals the outer rim to prevent leaks. Moderate DIY.
Easily replaced by snapping the new one into place. Read more
This lower wire harness routes power and signals between the control and the components beneath the tub on select 4.7/4.8-cu ft top-load washers. Replacing a damaged harness restores reliable connections and helps resolve intermittent motor or pump operation. What it does:
This WASHER is an OEM part specifically designed for Whirlpool top-load washing machines. Tailored to fit seamlessly, this component ensures the efficient operation of the washer. It plays a crucial role in maintaining the stability and balance of the machine during the washing cycles.
A damaged or worn-out top-load washer can negatively impact the appliance's performance. Causes of a defective washer might include prolonged use, physical damage, or exposure to excessive weight or force, resulting in instability or imbalance during operation.
Symptoms of a bad WASHER may include:
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air, and some Kenmore models.
This factory screw secures panels, brackets, and other components in your appliance. Replace a missing, stripped, or corroded fastener to restore a tight fit and keep parts properly aligned and rattle-free.
In the past we’ve fixed the latch with just high speed great. This time we ordered a new latch and replaced it. Washing machine has been working perfectly ever since. It was very easy to find the right part by simply entering the model number of my washing machine. It was quick delivery and the correct part. Very happy to have a working washing machine again. Read more
Supports the washer drum shaft for smooth, quiet rotation. Replace when you hear grinding, squealing, or notice drum wobble. Confirm fit with your model.
Suspension pad absorbs vibration and keeps your washer stable during spin cycles. Replace if machine shakes excessively or moves. Confirm fit with model.
Remove top lid panel and splatter shield. I didn't need to remove the back panel on my model. Used pliers to lift the old rod up and out. Did one rod at a time. Watched several videos so it went quickly. I've done 2 loads now and the machine has stayed in place. Be sure to balance the machine prior to that first load. I also replaced rubber pads on the interior housing. These provide bumper between the tub and housing walls. Read more
This is a hinge bearing that supports the washer lid or door hinge, allowing it to pivot smoothly during opening and closing. It sits between the hinge components to reduce friction and maintain proper alignment. Replace this bearing if the lid or door feels stiff, squeaks, wobbles, or no longer stays in position when opened.
If your laundry center won't start or cycle settings aren't working, this 5-position rotary switch likely needs replacement. Moderate DIY repair.
Plastic shroud that protects the drive pulley and belt mechanism. Replace if cracked or broken from wear. Confirm fit with your model number.
Extends the drain hose approximately 4 feet. You must also order a drain hose connector kit: 285835.
I ordered the drain extension kit and the hose connector kit. Read more