Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Internal drain hose routes water from the washer tub to the external drain. Replace if cracked, leaking, or damaged from constant use or obstructions.
I had previously replaced the transmission in my two year old Whirlpool Cabrio washing machine. Overall it was in good shape but gets heavy use. That repair was approximately $200 and worked for several months. Recently it began leaking. At first I thought it was the tub-to-shaft seal. I replaced this part but it was still leaking. It turns out it was the simplest of things... The drain hose was not connected very well! I replaced the drain hose ($11 part) and while I was at it I... Read more
Fix a washer lid that won't lock with this lid lock bezel. Replaces cracked or broken bezels that prevent the wash cycle from starting. Easy DIY fix.
Ordered parts from Appliance Parts Pros and replaced them.Works like new Read more
Fix a washer that won't drain or shows long drain errors with this water pump replacement. Drains water from the tub during wash cycles. DIY-friendly repair.
Ordered the new pump, then had to drain the tub by hand with a transfer pump. Put the washer on its back after unplugging it. Disconnected the wires, removed the 3 bolts and removed the clamp from the hose and reinstalled the new pump. Read more
Washer loud during spin? Grinding or jet engine noise usually means failed bearings in the gearcase. Includes bearings and seals. Moderate difficulty repair.
I replaced the washer's transmission. The replacement was a little bit detailed because you need to remove several parts inside the washer and under the bottom of the unit. The replacement took more time removing older parts and cleaning the washing machine before I could replace the transmission itself. All tools required were on hand except the tool used to remove the large bolt inside the washer drum. This tool was found on Amazon and cost around $15.00. Other than that, it was straight... Read more
The Hose Clamp is an OEM part for Whirlpool washing machines. This clamp secures the hose in place, ensuring a tight connection and preventing leaks during operation. It is essential for maintaining the integrity of the washing machine's water system, securing hoses that carry water to and from the washer.
Common causes of a bad hose clamp include rust, physical damage, or loosening from repeated tightening and loosening.
Symptoms of a bad hose clamp include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.
We ordered parts from appliance parts pros and I fixed it. Read more
Fix a broken or cracked detergent dispenser drawer that won't hold soap properly. Direct replacement installs in about 5 minutes with no tools required.
I removed the old one, broken bits and all. I replaced it with the new one. Read more
Connects washer tub to drain pump. Replace if cracked, split, or chewed by rodents. Common wear from chemicals and rubbing against machine components.
Ordered the part got it in 2 days Read more
The Spring Tension Hose Clamp is an OEM part for Whirlpool washing machines. It is designed to secure hoses in place, preventing leaks by maintaining consistent tension on the hose connections.
Over time, spring tension hose clamps can lose their effectiveness due to metal fatigue, corrosion, or damage from frequent tightening and loosening. This can lead to leaks and improper hose connections.
Symptoms of a bad spring tension hose clamp include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Took off cover, installed new parts. Read more
Fix a washer that won't spin or agitate properly. This drive motor powers the wash basket rotation. Moderate DIY repair, typically 15-30 minutes.
Initially fixed the gear drive, splutch and had new belt, but once I got under the machine I realized the belt had destroyed the pulley on the electric motor and the belt guard. I installed the new gear drive and splutch, then once I got the motor and belt guard in, I installed those. The motor and guard took 15 min total to complete. Perhaps, the only thing wrong was the belt and pulley, but I’m glad I changed it all out, and now know everything is new under there! Read more
Washer overfilling or not filling properly? A damaged pressure switch hose prevents accurate water level sensing. Easy 15-minute DIY fix with video.
I read the FAQ section of Appliance Pros parts web site. I found out I needed to replace the temperature control switch, WPW10248240, to correct my problem. This switch also controls the tub filling water level based on air pressure via the attached vinyl tubing. I ordered the switch and the tubing, WP353255, in case mine was no longer any good, and I also ordered the retaining clips for the control cabinet, (2) of WP8312709, because they can be damaged when accessing the controls. My new... Read more
Secures the rear bearing housing to the tub assembly in your washer. Replace if loose, worn, or during bearing repairs. Verify fit with your model number.
Replaced agitator Read more
The Console Clip is an OEM part compatible with Whirlpool dryers. This clip secures the control console assembly to the top panel, ensuring it is firmly mounted during operation. Properly functioning clips are necessary to maintain the correct alignment of controls and prevent detachment.
Causes of a bad clip can include wear and fatigue from repeated opening and closing of the dryer door. Excessive force or impact could also bend or break the clip over time.
Symptoms of a bad clip include:
This OEM Whirlpool replacement clip is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This 8-18 x 5/8-inch screw secures dryer panels, brackets, and covers. Replace missing or stripped fasteners to restore a tight fit and stability.
I put all pieces that I ordered on the dryer and plugged it in. Read more
This replacement screw secures panels, brackets, and other components in your appliance to keep them aligned and rattle-free. Replacing worn, stripped, or missing hardware restores a tight fit and helps maintain safe, quiet operation.
I ordered two replacement baffles and screws, then lifted the top of the dryer to access the drum and installed the two new baffles. Read more
Replacement leveling foot for washers and laundry centers. Threads into the base to adjust height and stabilize your appliance. Needed when broken or missing.
Bought a new one and screwed one on. Read more
This WASHER is an OEM part specifically designed for Whirlpool top-load washing machines. Tailored to fit seamlessly, this component ensures the efficient operation of the washer. It plays a crucial role in maintaining the stability and balance of the machine during the washing cycles.
A damaged or worn-out top-load washer can negatively impact the appliance's performance. Causes of a defective washer might include prolonged use, physical damage, or exposure to excessive weight or force, resulting in instability or imbalance during operation.
Symptoms of a bad WASHER may include:
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air, and some Kenmore models.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.