Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Connect hot and cold water faucets to your washer's inlet valves with this 2-pack of 5-foot fill hoses. Replace aging, cracked, or leaking supply lines.
Purchased water inlet valve and new hot and cold water hoses. Unscrewed about 5 screws that were holding the top of the washer in place then slide the top forward and up. Released the control top it popped off no screws. Disconnected the wires attached and unscrewed 2 screws holding the valve in place the popped that off. Popped in a new valve and repeated the process in reverse. Boom done! Very simple works like new! Read more
Hinge bearing supports your washer door for smooth operation. Replace if door sags, makes noise, or doesn't align properly. Confirm fit by model number.
Hardware washer distributes load under fasteners to prevent loosening and reduce vibration. Replace when missing or damaged to restore secure fit.
Watched a video online, the project took about 20 minutes, went well, parts fit good, the video was very helpful in getting the wash machine up and running. Read more
Fix fabric softener pooling in the cup or uneven conditioning. This washer dispenser assembly restores proper softener release during rinse cycles.
White bezel cover for washer dispenser. Snaps into place over soap, bleach, and softener compartments. Replace if cracked, broken, or discolored.
I ordered a new top from AppliancePartsPros.com. I was confused about what to order, but a very helpful lady on Chat told me what to order. With regular shipping, the new part arrived in less than TWO DAYS. The part was exactly the right part, with all of the requisite holes, etc. My clothes washer now looks like new again! Read more
5 foot. Package of 2.
We found the pump online at AppliancePartsPros.com for our model of Maytag. When we found the part, there was a video posted that was for our exact pump and washer. After watching it, we called Appliance Parts Pros to verify the part. The customer service representative was incredibly helpful and confirmed our diagnosis. We ordered the pump as well as hoses and clamps in case we needed them. We ordered them overnight delivery and the customer service rep said that we might not receive it... Read more
Size: 10-24 x 3/8 inch.
Replaced timer control unit, first time doing this. Read more
This siphon break kit prevents water from siphoning back out of the washing machine tub through the drain hose during the fill cycle. It acts as an air gap device installed on the drain line to ensure proper water levels are maintained. Replace this kit if your washer is not filling properly, takes too long to fill, or you notice water draining out as fast as it fills.
I bought a part and it worked perfectly. I was able to connect a flexible pipe to the siphon valve and set up a grey water system from our washing machine. Read more
Connects drain hose sections to prevent leaks and restore proper wastewater drainage. Replace if coupling cracks or connection leaks during draining.
If your washer makes loud grinding noises or won't spin properly, the stator plate may be worn. This stationary motor component supports smooth operation.
White control panel bezel for washers. Replaces cracked, broken, or discolored bezels on the front control area. Restores clean appearance.
Kit contains two 10 feet inlet hoses.
Factory fastener that secures panels and components in your laundry center. Replace if missing, stripped, or corroded to maintain proper alignment.
After hunting the web for info on causes for this problem and finding only vague information, I found Appliance Pros website. By this time, i had narrowed the problem to either the drive hub or the Control board, which is about $150 difference in cost between the two!! I used the site's info on how to run the automatic diagnostics test. This gave me a C8 failure (drum wouldn't spin). I followed the directions for the manual motor tests and everything passed. I then went through the parts list... Read more
Replacement outer tub assembly for washers. Installs as the main water-holding drum. Replace if cracked, corroded, or damaged. Includes bearing housing.
The bearing is molded into the outer tub. Th process is not complicated but does take about two hours. The most difficult part of the process was filing information on opening the top of the washer. Some information says to use a putty knife an push in to release the catch but on the version we have you need to unbolt two sheetmetal screws in the back, pull forward on the top and lift up. You only need to remove the top two screws in the back. When putting the top back on make sure you have... Read more
Screw for control panel.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.