Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
If your washer door won't stay latched or secure during cycles, the door strike may be damaged or worn. This part installs in seconds with minimal tools.
Partially removed the rubber gasket and replaced the latch. Replaced the strike on the door. Read more
Replacement dispenser hose channels detergent from the tray to the wash drum. Needed when original is cracked, torn, or leaking due to wear or rubbing.
Removed the leaking hoses and seal. Installed the new ones. They all fit perfectly. The disassembly/reassembly of the washer took the most time. Read more
The Hose Clamp is an OEM part for Whirlpool washing machines. This clamp secures the hose in place, ensuring a tight connection and preventing leaks during operation. It is essential for maintaining the integrity of the washing machine's water system, securing hoses that carry water to and from the washer.
Common causes of a bad hose clamp include rust, physical damage, or loosening from repeated tightening and loosening.
Symptoms of a bad hose clamp include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.
We ordered parts from appliance parts pros and I fixed it. Read more
This screw is used to secure the handle end cap to the center of the door. The screw size measures 8-18 x 1/2 inches.
This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one. Read more
Fix F20 error codes and water level issues with this pressure switch hose. Connects sensor to tub for accurate water level detection. Easy 30-min repair.
Several months back, I checked the supply hoses and replaced the hot water hose because of corrosion. The cold water hose was fine. I replaced the water inlet valve and that seemed to fix the problem, but after about a week, the problem resurfaced. After searching various internet resources, I though the pressure switch which detects the water level could be bad. I order both the pressure switch and the hose that connects it to the air chamber. Before installing the new pressure switch, I... Read more
Connects the outer tub to the drain pump in your washer. Replace if cracked, leaking, punctured, or worn. Includes check ball housing for proper drainage.
Took the old part off and fitted the new one. I used the old plastic ball from the old hose and it worked fine. Next time I would replace the original clamp with a 4 inch hose clamp. The original clamp is way tooooooooooo hard to put back on....with a different clip it would be a 10 minute job at most. Read more
Replace your washer's drive pulley if worn, wobbling, or has damaged mounting flats. Installs on the tub shaft to transfer belt motion to the drum.
I pulled the unit away from the wall and noticed black dust on the floor. Unplugged the unit, turned off the water. Removed back panel (about 10 screws with Torx heads) and noticed the belt was off, the drive pulley was loose and wobbling on the shaft, black dust all over the inside. Belt was worn along one side. Some grooves/damage in the outer drum casing around the pulley where it appeared the belt had rubbed. Removed the lower crossbar (2 more screws) to get better access to the drive... Read more
Fix a washer that won't drain or makes humming noises with a new water pump. This part circulates water during wash and drain cycles. Moderate DIY repair.
Drilled a 4/1/4 inch hole in the front for regular cleaning access and went through the back. I did not remove the front of the unit because it is a stacked. Read more
Fix LF or F20 error codes and slow fills with this water inlet valve. Controls water flow into washer during cycles. Moderate DIY repair, 30-45 min.
Called a repair man after not being able to determine the exact problem. Narrowed it down to valves, level switch or mother board. Repairman took money for parts and then said he couldn't find them. Went online and found this site, ordered parts Monday, had them by Thursday noon. Had machine running by 1. Read more
Internal drain hose routes wastewater from the washer tub to the drain pump. Replace if cracked, torn, leaking, or damaged by wear or rodents.
Upon cleaning my washer filter, I noticed that the hoses were very dirty. Instead of trying to clean, I decided to purchase new ones. Good price and fit perfect. Thanks Read more
Secures your washer's door boot seal to prevent leaks. Replace if worn, corroded, or loose. Confirm fit with your model number before ordering.
Watched several Youtube videos before finding one that showed a method of replacement without removing the front of the machine. Used a short Philips screw driver to loosen the clamp screws. They had a 90-degree attachment on a drill (electric screwdriver) in the video, which would have made it much easier, but even with large hands, this method was quicker and easier than dismantling the machine. Read more
Replacement washer drum baffle that lifts and moves clothes during the wash cycle. Needed when original baffle is cracked, broken, or missing.
This was a simple fix since mine didnt need any screws. Slipped in and locked into place. Read more
Flexible drain hose routes water from washer tub to household drainage. Replace if cracked, leaking, or deteriorated from age and flexing wear.
Replaced hose that came with the new washer with this longer one. Read more
The Spring Tension Hose Clamp is an OEM part for Whirlpool washing machines. It is designed to secure hoses in place, preventing leaks by maintaining consistent tension on the hose connections.
Over time, spring tension hose clamps can lose their effectiveness due to metal fatigue, corrosion, or damage from frequent tightening and loosening. This can lead to leaks and improper hose connections.
Symptoms of a bad spring tension hose clamp include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Took off cover, installed new parts. Read more
This motor control board regulates the washer's drive motor, controlling spin speed and direction during wash and spin cycles. It is typically mounted near the bottom of the washer behind the front or rear access panel. Replace this board if the washer won't spin or agitate, stops mid-cycle, or if the motor runs erratically or not at all.
After much reading on line regarding my problem. I decided to do any test that I could to try to diagnose and fix this myself if I could. This took a lot of time and patience to get the answers on how to go about this from "experts" as some of the info was contradictory. I was almost about to give up and buy a new washer with less electronic parts and buttons as advised by an honest appliance technician . I tried one more thing first which was to disconnect the lead wires connected to the MCU .... Read more
Flexible vent hose mounts on top of the washer tub to release humid air. Replace if cracked, disconnected, or the foam gasket is worn and leaking.
Open the top and observed water squrting out from the vent hose connection to the top of tub. Tried to insert a home made gasket but still leaking. Ordered replacement hose assembly from AppliancePartsPros.com on Sunday. Got the part Tuesday. 15 minutes later the hose is replaced. Run the clean washer cycle and no more water on the floor. Washer is a front load model with steam function; about 3 years old from 2011. I think this vent hose is present on models with fanfresh function; having a... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.