Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement lower spray arm assembly for dishwashers. Installs under the upper dish rack to distribute water during wash cycles. Needed when cracked or broken.
Note: Due to manufacturer changes, the spray arm no longer has the metal tips on the end of the spray arm. Per the manufacturer, it is no longer required.
Purchased new lower spray arm. counterclockwise wise turn to remove and clockwise turn to replace Read more
Dishwasher won't start or run? A faulty door latch prevents cycles from beginning. This latch assembly secures the door and activates switches. 5-10 min fix.
After I double checked that the unit did have power to it, I concluded it was probably a switch or the User Interface Board. I found the parts on the AppliancePartsPros for the best price and delivery. After the parts were delivered two days later, it took me a couple hours to disassemble and re-assemble the door for the dishwasher and luckily everything seems to be working fine three days and three loads later. The only issue I had was with the User Interface board..... this is a generic... Read more
Dryer bearing slides enable smooth drum rotation. Replace when hearing squeaking or rumbling sounds during cycles. Confirm fit with your model number.
A thumping sound (like sneakers in the dryer) started happening. We stopped using it so that it wouldn't get worse and potentially break more parts. Online research suggested rear drive shaft would be the problem. But also suggested while we have the dryer apart, would be smart to replace the belt and the slides/glides (green and white plastic tabs in front, attached to the door). We ordered all the parts from AppliancePartsPros.com and they arrived FAST. It helps to have two people for this... Read more
Fix H2O error codes and water fill issues with this dishwasher pressure sensor. Monitors water level for proper fill cycles. DIY repair in about 1 hour.
Tried to fix with a non GE part, didn’t work. Your GE brand pressure sensor worked like a charm Read more
Seals the dishwasher tub opening to prevent water leaks during wash cycles. Replace if worn, flattened, or causing leaks. Verify fit with your model.
Upon taking the door apart it looked like the leak was coming from the vent so I replaced the vent cap, vent seal and the transition piece. I did not have to change the seals. It took me a while to figure out how to get the door apart, but once I did, it was fairly straightforward. Read more
The Lower Rack Roller is an OEM replacement part for GE dishwashers. This small but crucial component allows for smooth and effortless movement of the lower dish rack during loading and unloading.
Symptoms of needing to replace the lower rack roller include:
Causes of a faulty lower rack roller can include normal wear and tear over time, exposure to heat or moisture, or physical damage due to impact or mishandling.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.
I was able to find the parts on your website. I was a little worried because there were no photos, but the parts were correct, and it was an easy fix! Read more
If your dishwasher won't drain or has standing water, this drain pump removes water at the end of each cycle. Moderate DIY repair, 30-60 minutes.
Replace your dishwasher's middle spray arm if it's cracked, broken, or worn. Snaps into place in the mid-rack section. Tool-free installation.
Ordered part and snapped it on. Read more
Dishwasher detergent dispenser won't open or latch? This module controls soap release during wash cycles. Moderate DIY repair—30 minutes, door removal.
Tried CLR to remove hard water deposits. That did not help. Ordered new dispenser. The GE series that the detergent module fits in was a little difficult to open. Finally found a video explaining the whole door had to come off in order to open it up to replace the module. Works great now. Read more
The Heating Element is an OEM replacement part for GE dishwashers. It is responsible for heating the water during wash cycles and assisting in drying dishes at the end of the cycle. The heating element ensures optimal cleaning and drying performance by raising the water temperature and promoting evaporation.
Over time, heating elements can fail due to wear, mineral buildup, or electrical issues. A malfunctioning element may result in poor cleaning or drying performance.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Replaced the heating element. Read more
Upper dishrack rail for dishwashers. Allows the top rack to slide in and out smoothly. Replace if cracked, broken, or bearings are worn or missing.
Replaced the upper rack inner rail assembly. Read more
Prevents water leaks around the dishwasher door during wash cycles. Replace if you notice water pooling at the bottom. Confirm fit with your model number.
Located and replaced flexible pump tub seal. Read more
Dishwasher not filling with water or showing H2O error code? This water inlet valve controls flow into your dishwasher. Easy DIY replacement fix.
Replacement was easy and it works as it should. Thank you for your guidance. Read more
Replacement door cable and spring kit for dishwashers. Installs on door hinge to provide proper tension and balance. Needed when cables break or springs wear out.
Replaced broken part. Read more
Seals dishwasher tub edges to cabinet, preventing leaks and debris entry. Replace if worn, cracked, or missing for proper seal. Verify fit with model.
Diagnosed problem with UI fail / Personality lost from service manual. Replaced UI board with only one hiccup. (Mixed up personality jumpers) New board requires personality to be set specific to the model number. Board will not function correctly, if al all, if the personality jumpers are not set exactly to your model. Read more
The Door Latch Strike is an OEM part for GE dishwashers. It ensures the dishwasher door latches securely, allowing the appliance to operate only when the door is properly closed.
Causes of a bad door latch strike can include wear and tear from regular use, damage from slamming the door, or misalignment due to repeated opening and closing.
Symptoms of a bad door latch strike include:
Based on our research, the dishwasher latch was one of the most common causes for our model of dishwasher malfunctioning. We purchased this replacement unit, and thanks to the help provided via videos and diagrams, my wife and I were able to very easily install the new latch. While this replacement did not totally fix our problem, it was part of it. Shipping on the part was very quick, I ordered it on Friday night, and the latch arrived Saturday morning. Read more