Pfw950spt3ds Parts

This suspension spring supports the washer tub and controls movement during wash and spin. Replacing a weakened spring helps reduce vibration and banging, restoring stable operation and protecting nearby components from excessive motion.

• Supports and balances the suspended tub/drum inside the cabinet
• Absorbs movement to limit vibration and banging during high-speed spin
• Helps prevent off-balance interruptions and "walking"
• Typical signs of wear: tub sits low or uneven, excessive shaking, thumping, or squeaking

• Disconnect power and shut off water before servicing; move the appliance for safe access
• Springs are under tension—support the tub and use appropriate pliers/spring tools; wear gloves and eye protection
• Note original hook locations/orientation and reinstall in the same positions
• Inspect mounting points and related hardware; replace any worn parts to maintain proper suspension

This sump hose channels defrost and condensation water from the refrigerator evaporator to the drain/sump to help prevent leaks and water buildup. Replace a damaged hose to restore proper drainage and reduce puddles. What it does:

• Carries evaporator and defrost water to the drain or pump to prevent pooling.
• Helps keep the freezer and fresh-food compartments draining properly.
• Use when you see water pooling under or inside the refrigerator or persistent drip/overflow from the drain area.
• Helps prevent freeze-ups or odors caused by standing water in the drain path.

• Disconnect power and turn off the water supply before starting service.
• Inspect and clear the drain channel and fittings before installing the new hose.
• Ensure hose ends are fully seated and secured with clamps or retained fittings to avoid leaks.
• Refer to your model's service manual or OEM illustrated parts list for routing and clamp locations.

This drain pump funnel directs water from the washer tub into the drain pump so the machine can remove standing water reliably. Replaces a worn or cracked funnel to restore proper drainage and help prevent leaks at the pump area. What it does:

• Channels water from the tub to the drain pump so the washer can pump out water
• Prevents water from bypassing the pump mounting area and causing leaks
• Helps reduce debris buildup around the pump inlet that can block flow
• Common symptom: washer won't drain or leaves water in the tub; visible leaking near the pump

• Disconnect power and water supply before servicing the washer.
• Access usually requires removing the washer front or lower access panel; keep track of fasteners.
• Inspect pump mounting and seals when replacing the funnel; replace damaged gaskets as needed.
• After installation, run a short drain/spin cycle to check for leaks and proper operation.

This door hinge assembly replaces a worn or damaged hinge to restore smooth door pivot and proper alignment. It helps keep the door securely positioned for reliable sealing and easy opening and closing. What it does:

• Provides a durable pivot point so the door opens and closes smoothly
• Restores proper door alignment to prevent gaps and uneven sealing
• Reduces sagging, scraping, or catching when the door is moved
• Helps quiet noisy or stiff door motion caused by a damaged hinge

• Disconnect power supply and water before servicing the appliance
• Support the door while removing and installing the hinge to prevent damage or injury
• Keep original fasteners if reinstalling; replace any stripped or damaged screws
• Tighten hardware securely but avoid over-torquing to prevent component damage; test door operation after installation

These front panel screws secure the appliance's front panel to the chassis, restoring proper fit and appearance. Replace stripped or missing screws to stop panel rattling and uneven gaps. What it does:

• Fastens the front panel to the appliance frame for a secure fit
• Prevents panel vibration, rattling, and misalignment during operation
• Replaces corroded, stripped, or lost fasteners that keep the panel loose
• Helps maintain proper access to controls and internal components

• Front panel screws

• Disconnect power before servicing to avoid electrical shock
• Use the correct size screwdriver to avoid stripping screw heads
• Thread screws in by hand first, then tighten snugly—do not overtighten
• Keep removed hardware organized for reassembly

This user interface board is the electronic control panel that lets you operate the washer and communicates button presses to the main control. It restores responsive controls and proper display behavior so you can select cycles and options reliably. What it does:

• Reads and transmits button and touch inputs to the washer's main control board
• Powers and controls the front-panel display and status lights
• Helps prevent incorrect cycle selection or unresponsive controls
• Common symptom fixes: unresponsive buttons, blank or erratic display, or incorrect cycle feedback

• Disconnect power to the appliance before starting any repair
• Handle the board carefully and avoid touching components; use ESD protection if possible
• Remove the control panel trim and disconnect ribbon and wiring harnesses to access the board

This latch cover protects and finishes the appliance door latch area while keeping the latch mechanism clean and snag-free. It restores a smooth, finished look and helps the door engage correctly. What it does

• Covers the door latch assembly to protect internal components from dust and debris
• Provides a smooth surface to prevent clothing or items from catching on the latch
• Restores the original appearance where the latch cover is cracked, faded, or missing
• Helps maintain proper door engagement by holding the latch area aligned and shielded

• Disconnect power to the appliance before inspecting or replacing any door components
• Access may require removing the door trim or panel; keep track of screws and fasteners
• Replace only with the exact part to ensure proper fit and safe operation

The Screw is an OEM part for GE washing machines. Specifically, an #8-32 thread forming screw is used throughout internal assemblies for tightening and securing components. 

Symptoms of needing replacement screw include:

• Stripped, cross-threaded, or severely worn existing screws
• Screw heads sheared or broken off inside fixtures   
• Loosened panels, covers, or parts from backing-out fasteners

Causes involve fatigue, damage, or rusting of individual screws degrading their clamping abilities over extended use cycles.

This GE OEM replacement screw ensures proper compression and attachment of fixtures. Rely on quality fasteners to preserve structural integrity. Order spares and replace problematic screws today before further issues arise from detached or weakened joints.  

Compatible with some Hotpoint, RCA, and Kenmore models, GE #8-32 screws are essential for thorough washer repairs and maintenance.

The External Drain Hose Guide is an OEM part for GE washers. It plays an important role in directing and positioning the external drain hose during the drain cycle of a washing machine. The external drain hose guide ensures the hose is situated properly to allow for optimal draining of water. 

Causes of a bad external drain hose guide include cracks, breaks, or loose fittings that no longer securely hold the drain hose in the correct position. Over time, plastic guides can become brittle or warped due to environmental factors.

Symptoms of a bad external drain hose guide are: 

• Slow or inadequate draining of water 
• Puddling or pooling of water near the washer
• Leaks caused by a misaligned drain hose
• Excessive water remaining in the washer after a cycle 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This replacement wire tie secures wiring and harnesses inside appliances to keep connections neat and reduce movement that can cause wear. It's a simple fix to organize wires during repairs or after reassembly. What it does:

• Holds wiring and harnesses in place to prevent rubbing and chafing
• Keeps wires bundled to reduce strain on connectors
• Helps prevent wires from contacting hot or moving parts
• Useful when reassembling panels or replacing components

• Always disconnect power before servicing the appliance
• Loop the tie around the wires, insert the tail through the head, and tighten to secure—avoid over-tightening
• Trim the excess tail flush with a cutter to prevent snagging
• Replace any damaged wiring insulation before bundling