Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Rb19k-4A Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP681414

Specs: 10-16 x 1/2 inch.

Do-It-Yourself Stories from Customers like You Dryer drum was beginning to stall occasionally   Dana J E. • San Marcos , CA • March 17, 2015

After shopping for a new Whirlpool Thin Twin Stack, Found appliance parts pros online and decided to take it apart to see if repair was a possibility. APPro's online instructions were easy to follow, in a couple hours it was apart, and I placed the order. Reg ground took a week from NY, so the laundry piled up that week. The parts arrived on Monday morrning, by afternoon the machine was running like new! The cause was the belt tensioner pulley had frozen. Replaced it, drum wheels,snap... Read more

More
$5.95
Compare At:
$7.02
You Save:
$1.07

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489478

Size: 8 x 1/2 ab.

Do-It-Yourself Stories from Customers like You Wanted to update wood paneled compactor   Julie S. • San Antonio , TX • December 09, 2014

Removed the handle with two screws on the inside front and pulled out the custom wood panel. Pulled the compactor out from under cabinet. Tipped it over on back of unit, supporting it with a little foot stool. Unscrewed two lower screws at bottom of unit holding black trim panel (that held wood panel in place) and lower black rubber flap. Removed two screws on lower outside side of unit that held the foot pedal. Slid off black U shaped metal frame from top of compactor towards bottom. Slid on... Read more

More
$5.95
Compare At:
$7.02
You Save:
$1.07

IN STOCK
Ships Today Guaranteed
Add to Cart
Compression Nut - 1/4 Inch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP627018

Size: 1/4 inch. Nut for plastic water line.

Do-It-Yourself Stories from Customers like You Broken y connector off of water valve on amana refridgerator   Greg S. • El Dorado Hills , CA • October 19, 2014

Ordered part from AppliancePartsPros.com and received it 2 days later. Put the part in, fit like a glove, water and ice cube maker working flawlessly again with no leaks. Thanks. Read more

More
$11.95
Compare At:
$14.34
You Save:
$2.39

IN STOCK
Ships Today Guaranteed
Add to Cart
Water Supply Line
Genuine Whirlpool part
By: Whirlpool
Part Number: WPB5705307

Ice maker water line: 1/4x 8ft.

This part fixes the following symptoms
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You Water leak and broken parts inside refrigerator   Todd B. • Indianapolis , IN • August 28, 2017

Replaced the broken parts. The water leak was caused by the drain valve not directed into drain pan Read more

More
$16.95
Compare At:
$20.00
You Save:
$3.05

IN STOCK
Ships Today Guaranteed
Add to Cart
Speed Clip (Screw Retainer), 1 Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: WPM0114003

This speed clip is a small retainer that slides over a panel edge to provide a captive thread for a screw. Replacing a worn or missing clip restores a tight, rattle-free hold on the attached component. What it does:

  • Slides over a panel or bracket to create a captive thread for a mounting screw
  • Maintains tension to resist vibration and loosening
  • Helps when a screw spins or won't tighten due to a missing retainer
  • Addresses loose, rattling, or misaligned panels or trim
What's included:
  • 1 speed clip
Install notes:
  • Disconnect power and, if applicable, shut off water before servicing
  • Note the original clip's location and orientation for correct fit
  • Fully seat the clip on the edge; start the screw by hand to avoid cross-threading
  • Do not overtighten; ensure the component is secure and noise-free

Do-It-Yourself Stories from Customers like You Water was leaking & then freezing in the bottom of the freezer compartment   Ronald S. • Frankfort , IL • December 30, 2014

Replaced the water tube that went from the plastic tubing to the ice cube tray. Found that even though it was the same exact length as the original, there was only an extremely small gap from the end of the tube to a splash board. This may have been the root cause of my problems. Read more

More
$11.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Drier
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10143759

 

Do-It-Yourself Stories from Customers like You Failed to cool due to hole/s in evaporator leaking freon   Gerald L. • Myrtle Beach , SC • August 17, 2017

Ordered new Evaporator part and Drier from Appliance Pros. The part arrived earlier than expected and was properly packaged. I had both parts installed by a professional as they required a level of expertise above my capabilities. Works perfectly. Read more

More
$28.23
Compare At:
$33.59
You Save:
$5.36

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw (Black)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP7101P126-60

This factory fastener secures panels, trim, or brackets on your appliance. Replacing a missing or stripped screw restores a snug, rattle-free fit and keeps components aligned for proper operation and a clean, finished appearance.

  • Fastens exterior panels, trim pieces, or internal brackets to the appliance chassis
  • Replaces lost, damaged, or stripped hardware
  • Helps prevent vibration, rattling, and gaps between parts
  • Common signs you need this screw: missing hardware, loose or misaligned panel/trim, stripped head or threads
What's included: One screw Install notes:
  • Disconnect power before servicing; also shut off the gas supply
  • Use the correct driver; start the screw by hand to avoid cross-threading
  • Tighten snugly—do not overtighten to prevent stripping or cracking adjacent parts
  • Repair or replace the mounting point before installing

Do-It-Yourself Stories from Customers like You Oven element was burnedout   Robert J. • Hope , ME • February 08, 2015

Turned off breaker,unscrewed (2 screws) element,pulled element out from back of oven,unplugged 2 wires, attached wires to new element, pushed back in, installed retaining screws Read more

More
$5.95
Compare At:
$7.08
You Save:
$1.13

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489069

Size: 1/4 inch hex head, 10-12 x 1/2 inch.

Do-It-Yourself Stories from Customers like You Broken handle foot pedal and missing parts   Donald M. • Lake Arrowhead , CA • April 05, 2015

This trash compactor is in our vacation home. We never use it and now we are selling the house. When I looked to replace it I was amazed at how expensive a new compactor would cost. I found the serial number on the current compact entered it and your web site came up. Your schematics were excellent and made the repair very easy! Read more

More
$5.95
Compare At:
$7.02
You Save:
$1.07

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: W11380570

The Screw is an OEM part for Whirlpool microwaves. It is responsible for securing various parts of the microwave together. This screw ensures a tight and secure fit for parts and helps maintain the structural integrity of the microwave, preventing any loose or rattling parts.

A bad microwave screw can occur due to wear and tear, accidental damage, or misplacement during maintenance or repairs. If you notice symptoms such as loose or wobbly components, difficulty in opening or closing the microwave door, or abnormal noises while the microwave is in use, it may be time to replace this part.

Symptoms of a bad microwave screw include:

  • Loose or wobbly components
  • Difficulty in opening or closing the microwave door
  • Abnormal noises during operation

Restore your Whirlpool microwave by replacing the faulty or missing microwave screw with this genuine OEM part.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

Do-It-Yourself Stories from Customers like You The microwave door and handle were broken   Wayne M. • Joliet , IL • October 22, 2016

I received the parts from parts pro within 3 days and everything fit perfectly nd all went well Thanks Parts Pro Wayne Mazur Joliet Il Read more

More
$16.95
Compare At:
$20.17
You Save:
$3.22

IN STOCK
Ships Today Guaranteed
Add to Cart
Ice Stripper (Ejector)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2182124

Ice stripper removes ice cubes from the ice maker mold so the dispenser or storage bin fills properly. Replacing a worn or broken stripper helps the ice maker eject cubes cleanly and reduces ice jams or stuck cubes. What it does:

  • Pushes or guides harvested cubes out of the ice mold into the bin during the ice maker's harvest cycle.
  • Prevents cubes from sticking in the mold; a damaged stripper can cause incomplete ejection or leftover ice in the mold.
  • Works with the ice maker's ejector mechanism to maintain consistent cube release and storage.
  • A faulty or broken stripper may lead to noisy operation, partial fills, or visible ice build-up in the mold.
What's included: One ice stripper. Install notes:
  • Disconnect power to the appliance before starting any repair to avoid electrical shock.
  • Remove the ice maker or access panel per the manufacturer's instructions to reach the stripper; keep small parts and screws organized.
  • Inspect the ice mold and surrounding components for damage or ice build-up; clear ice before installing the new stripper.
  • After installation, restore power and run a test harvest cycle to ensure proper cube ejection.

Do-It-Yourself Stories from Customers like You Ice stripper was broken on ice maker   John A. • Baton Rouge , LA • March 12, 2015

Checked out the video on your site on how to disassemble the ice maker. Was really easy when you know the correct sequence. Only 3 screws and it's out of the freezer. Disassembled the ice maker on my kitchen counter and replaced the ice stripper. Reassembled and installed back in my freezer. It is as good as new Read more

More
$47.95
Compare At:
$57.06
You Save:
$9.11

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400065

This replacement cabinet screw secures panels, brackets, and ducts in Whirlpool-built appliances so components stay aligned and secure. Replacing missing or stripped hardware helps reduce vibration, rattling, and gaps that can affect performance.

  • Fastens panels, brackets, and internal components in the appliance cabinet
  • Helps maintain proper alignment and reduce vibration or rattling noises
  • Restores a tight fit where original hardware is missing, damaged, or stripped
  • Typical symptoms: loose paneling, buzzing/rattling sounds, or parts that won't stay fastened
What's included: One screw. Install notes:
  • Disconnect power; for gas models, also shut off the gas supply
  • Replace one fastener at a time to preserve alignment and match to the original hardware
  • Use the correct driver; start threads by hand to avoid cross-threading
  • Do not overtighten into sheet metal

Do-It-Yourself Stories from Customers like You Ice dispenser was skipping so not dispensing ice   Del H. • Midlothian , TX • September 03, 2018

The problem was that the motor coupler & shaft had a tiny bit of rust at their union. With the weight of the ice bin it rusted in the lowest position. This didn't allow the motor coupler to float on the shaft. There is a spring inside the shaft that pushes up on the motor coupler keeping it engaged in the ice bin coupler above. This coupler in turn rotates the auger in the bin to dispense the ice. I removed the motor coupler & shaft, tapped the coupler loose and filed off the rust. This allowed... Read more

More
$5.95
Compare At:
$7.08
You Save:
$1.13

IN STOCK
Ships Today Guaranteed
Add to Cart
Retaining Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY013783

This small retaining clip secures components in place inside the appliance, helping prevent movement, vibration, and premature wear. Replace a bent, fatigued, or missing clip to restore a solid, factory-tight hold.

  • Holds panels, brackets, or tubing securely in their mounts
  • Helps maintain alignment to reduce rattles, rubbing, or intermittent issues
  • Common signs of failure: missing clip, loose fit, buzzing/vibration, parts that won't stay seated
  • Restores proper retention after service, transport, or vibration-related fatigue
What's included: 1 clip Install notes:
  • Disconnect power and shut off gas/water before servicing
  • Note the original clip's orientation; remove with needle-nose pliers
  • Seat the new clip fully—do not over-bend; spring tension provides the hold
  • Test operation before reassembly

This part fixes the following symptoms
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You Pretty much everything   Charlotteanne Y. • Kingston , IL • August 06, 2018

Here's the story. All my appliances except the dryer broke. Yeah. talk about bad luck. First I tried to fix the refrigerator. Replaced both motherboard and inverter board. Now it wakes up but the compressor does not kick in. Need another part. The washer, well I have to pull out the sink to get enough room to pull out the washer to fix it. Since the refriigerator is still in the middle of the kitchen, I don't need to tear apart another room. Nevertheless, let me say this, I love my "older"... Read more

More
$6.45
Compare At:
$7.68
You Save:
$1.23

IN STOCK
Ships Today Guaranteed
Add to Cart
Ice Housing Support
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2195914

This support mounts in the dispenser area to secure the ice housing assembly. It helps keep the chute and door properly aligned so ice dispenses smoothly and the opening seals as designed.

  • Supports and positions the ice housing/chute assembly in the freezer door
  • Helps maintain proper alignment and sealing of the ice door/flapper
  • Reduces wobble or flex that can affect dispensing performance
  • Typical signs it may be needed: loose or misaligned dispenser housing, ice or air leaking at the chute, frost buildup around the dispenser, inconsistent ice dispensing
What's included: 1 ice housing support Install notes:
  • Disconnect power to the refrigerator before servicing
  • Remove the dispenser trim/control to access the housing; handle wiring and tabs carefully
  • Remove mounting fasteners, replace the support, and transfer any reusable hardware
  • Reassemble, restore power, and test ice dispensing and chute seal

Do-It-Yourself Stories from Customers like You Dark bits of something embedded in the ice cubes and a crack in one of the plastic pieces of the ice maker   Brett G. • Willow Park , TX • October 09, 2017

Replaced the ice tray and motor mount plate. While I was there I replaced the thermostat also. New parts arrived in a day and a half. Read more

More
$48.95
Compare At:
$58.74
You Save:
$9.79

IN STOCK
Ships Today Guaranteed
Add to Cart
Ice Cube Tray
Genuine Whirlpool part
By: Whirlpool
Part Number: WP61002140

The Ice Cube Tray is an OEM part for Whirlpool refrigerators. This tray is designed to fit securely in the freezer compartment and is used to form and hold ice cubes. The tray ensures that ice cubes are consistently shaped and easily removable for everyday use. The tray measures about 8-1/2 inches wide by 11 inches deep.

Over time, ice cube trays can become damaged or worn due to repeated use, exposure to cold temperatures, or mishandling. Cracks or warping in the tray can lead to leaks or difficulties in removing the ice cubes.

Symptoms of a bad ice cube tray include:

  • Cracked or broken sections
  • Difficulty in removing ice cubes
  • Leaks or water pooling in the freezer
  • Misshapen or irregular ice cubes

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

Do-It-Yourself Stories from Customers like You My fridge is just fine but i could not find these particular ice trays anywhere in my area not even where i purchased the fridge   Kathleen J. • Catasauqua , PA • July 28, 2014

I was just browsing the web for "ice cube trays".......Saw "AppliancePartsPros".....typed in my Fridge model number, and there were my much needed trays........I was so surprised, I was screaming, "I found them, I found them !!".....you would have thought that I just won the lottery, but it was so frustrating for 2 months, of trying to find these trays !!.....THEN you DID actually shipped them IMMEDIately and I had them the NEXT day...I was really, really shocked !!.....such a wonderful... Read more

More
$25.95
Compare At:
$30.88
You Save:
$4.93

IN STOCK
Ships Today Guaranteed
Add to Cart
Start Relay (Refrigerator Compressor)
Genuine Whirlpool part
By: Whirlpool
Part Number: 2154436

This start relay controls power to the compressor's start winding so the refrigerator can start and run. Replacing a weak or burned relay restores dependable compressor start-up and can stop repeated clicking with warming temperatures.

  • Energizes the compressor's start winding to provide initial torque, then disengages from the circuit
  • Common failure symptoms: refrigerator not cooling or intermittently warm; compressor hums/clicks and won't start; relay rattles, smells burnt, or shows heat damage; overload trips
  • Helps prevent hard-start conditions that stress the compressor
  • The relay contacts are open/shorted, the compressor may fail to start and cycle off on overload
What's included: 1 start relay Install notes:
  • Disconnect power before servicing; wear appropriate PPE
  • Access the rear machine compartment; remove the relay cover on the compressor. Note wire positions, pull the old relay straight off the compressor pins, transfer wires, and fully seat the new relay in the same orientation
  • If equipped, safely discharge the run capacitor; inspect the overload, wiring, and terminals for heat damage and address as needed
  • Reinstall the cover. If the compressor still won't start, further diagnosis of the start device, capacitor, or compressor is required

Do-It-Yourself Stories from Customers like You Relay   Larry S. • Midlothian , TX • September 15, 2015

Removed old. Installed new. Read more

More
$69.95
Compare At:
$83.94
You Save:
$13.99

IN STOCK
Ships Today Guaranteed
Add to Cart
Radiant Heater
Genuine Whirlpool part
By: Whirlpool
Part Number: WP60106-35

Radiant Glass (Quartz), Length (Approx) - 20-1/4, 450 watts

Do-It-Yourself Stories from Customers like You Amanda refrigerator too warm and its freezer too cold   Dennis K. • Pacifica , CA • November 09, 2015

I read the help guide on the AppliancePartsPros.com web site and then decided to test my defrost heater with a volt/ohm meter. I read an open circuit. I then removed the radiant heater element from the refrigerator and see nothing wrong with the element, but the connection on both sides to it, that resemble a spark plug wire to an automotive plug, was corroded to a powder making no electrical connection. I then searched for the replacement part to find that Amana discontinued the part after... Read more

More
$61.95
Compare At:
$73.72
You Save:
$11.77

IN STOCK
Ships Today Guaranteed
Add to Cart
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store