Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Upper left door hinge assembly for refrigerators. Secures and supports the upper door. Replace if broken, cracked, or worn to restore door alignment.
Ordered part from AppliancePartsPros.com Read more
Replacement upper right door hinge assembly for bottom-mount refrigerators. Installs at top of right door. Needed when hinge is broken, cracked, or worn.
Simple snap in piece, ordered and shipped in two days. Saving $200 Read more
Fix a refrigerator that won't dispense water or ice with this dispenser switch. Requires removing the display cover and disconnecting housing connectors.
I replaced the control board and the microswitch. Read more
Fix water pooling under crisper drawers. This evaporator shield with drain pan stops leaks caused by corrosion. Moderate DIY repair with video guide.
Repair required removing all of the interior drawers & shelves and the interior back panel. There you will find the defrost heater. Behind the defrost heater is a metal plate as well as one on the back of the front interior cover. Both were corroded and in need of replacement. I ordered Samsung part #’s AP5577767, plate drain & AP5587916, evaporator plate and replaced both. Read more
Fix fluctuating temperatures or food freezing in your refrigerator with a new pantry temperature sensor. Common fix for uneven cooling issues.
Replaced sensors and heater element. We'll see if that fixes the problem. It usually happens every 3 months. Read more
Center cap covers the middle hinge on French door refrigerator mullions. Replaces broken, cracked, or missing caps for a clean finished look.
In order it SHOULD be done: Pried off two white caps covering the screws that attach the flap to the left door, then removed screws. Lifted flap up to remove from door and disconnected cable. Used a thin blade to pry out the inner cover of the flap, then carefully pried out the insulation piece inside. Loosened the screw holding the center cap from the inside and removed cap. Worked the cable out of the hinge piece so it could be removed and cable pulled through case. Pried upper and lower caps... Read more
The Refrigerator Door Magnetic Seal is an essential component for maintaining the efficiency of your Samsung refrigerator. This genuine OEM part ensures a secure and tight seal for your refrigerator door, helping to preserve the internal temperature and reduce energy consumption. Designed specifically for Samsung refrigerator models, the magnetic seal provides consistent performance and durability. Installing this genuine OEM part guarantees a perfect fit, restoring the integrity of your appliance if the original seal becomes worn or damaged. A reliable door seal not only prevents unwanted air leaks but also minimizes condensation and keeps your food fresher for longer periods. Easy to install, the Refrigerator Door Magnetic Seal enhances the overall functionality of your refrigerator, offering peace of mind and optimal performance. Trust in this genuine OEM part to maintain the quality and longevity of your Samsung refrigerator, ensuring it operates smoothly and efficiently every day.
Ordered leg. Cover and magnet switch. I did not need magnet switch, it came on the new leg cover. Read more
The Refrigerator Door Handle Shaft is essential for maintaining the functionality of your Samsung refrigerator. This genuine OEM part ensures a perfect fit and smooth operation, matching the original quality of your appliance. Crafted with durable materials, the door handle shaft provides reliable support for opening and closing your fridge door effortlessly. Its precise design minimizes wear and tear, extending the lifespan of your refrigerator's handle mechanism. Installing the Refrigerator Door Handle Shaft is straightforward, allowing you to restore your fridge's appearance and usability quickly. Compatible with various Samsung refrigerator models, this genuine OEM part guarantees seamless integration and dependable performance. Whether your current handle shaft is broken, loose, or missing, this replacement part offers a practical solution to keep your refrigerator functioning optimally. Enhance your kitchen's efficiency and ensure a secure, functional handle with the Refrigerator Door Handle Shaft .
I looked at the blow up drawing to figure out what parts I might need. I then watched a you tube video to see how to take the handle off. I kind of figured out on my own how to remove the ruined cap handle. It took me a few minutes to figure it out and more time to remove both the handle and the broken part. Turns out I did not need the spring nor the shaft cap handle. Very proud of myself. Saved a huge amount of money. Only problem was that I could only put in one screw as the previous... Read more
Fixes loud buzzing or grinding noises from your refrigerator's cooling fan. This brushless DC motor restores quiet operation. Moderate DIY repair.
Replaced the fan that circulates the air. Read more
Ice maker only producing crushed ice or freezing up? The auger motor controls ice dispensing. DIY-friendly repair, typically under 1 hour to install.
Entire Samsung Ice Master is modular. Ordered the "ASSY CASE-FAN AUGER MOTO " part and replaced original...Removed ice basket. Removed Cover-Wire Harness by removing screw and unplugged both the modular icemaker and part mentioned above. Icemaker is removed by sliding forward and down. The "ASSY CASE-FAN AUGER MOTO" part at back of ice compartment is held in by plastic clip on bottom of compartment. No screws to remove...just lift up clip and slide forward. Replace parts in reverse order.... Read more
The Refrigerator Door Reed Switch is an essential component for maintaining the optimal performance of your refrigerator. This genuine OEM part ensures accurate detection of the doorGÇÖs open and closed states, allowing your appliance to operate efficiently. Designed specifically for Samsung refrigerators, the Refrigerator Door Reed Switch guarantees a perfect fit and seamless integration with your existing system. By replacing a faulty or worn-out reed switch with this high-quality part, you can restore your fridgeGÇÖs functionality, preventing issues such as improper cooling or malfunctioning door alarms. The reliable performance of this switch helps maintain the right temperature inside your refrigerator, keeping your food fresh and your appliance running smoothly. Easy to install, the Refrigerator Door Reed Switch offers a straightforward solution for DIY repairs, saving you time and money. Trust in this genuine OEM part to deliver long-lasting durability and dependable operation, ensuring your Samsung refrigerator continues to serve your needs effectively.
Unplug all the plugs to the main control board and switched to the new control board. Works perfect thank you. These days you have to do stuff yourself. Everything is getting so expensive. AppliancePartsPros customer service was 100% good. Gave me the right parts thank you again and again. Read more
The Refrigerator Mullion Assembly is essential for maintaining the structure and functionality of your Samsung refrigerator. This genuine OEM part ensures a perfect fit, matching the original design for seamless integration. The mullion assembly supports door shelves and helps organize your fridgeGÇÖs interior, making it easier to store and access your food items. Crafted from durable materials, this assembly withstands daily use, providing long-lasting performance and reliability. Installing the Refrigerator Mullion Assembly restores your refrigeratorGÇÖs organization and enhances its overall usability. It is compatible with a range of Samsung refrigerator models, ensuring a secure and precise fit. Whether you need to replace a damaged or worn-out mullion, this genuine OEM part is the ideal solution to keep your refrigerator functioning smoothly. Experience improved storage efficiency and maintain the quality of your appliance with this reliable mullion assembly.
It took less than 10 minutes to replace the door. There is a video on YouTube also showing the replacement. I used the chat option on the Web site to get the right replacement part number. It was quick and easy too. I was impressed with the quick accurate response Read more
Ice not dispensing or weak flow? This dispenser door assembly restores proper ice chute function. Moderate DIY repair with basic tools in 30-45 minutes.
Removed Phillips head screw from bottom side. Next I removed front electronic interface panel, carefully. The plastic clips holding it in place are designed to pop lose on the right side first.then unplug wiring from back of interface panel. Remove two Phillips head screws holding ice/water dispensing unit in place. Carefully remove dispensing unit from leaving multiple wiring plugs connected. Carefully apply pressure to the side of the ice chute door frame to remove the ice chute door/flap.... Read more
Seals the ice chute to prevent warm air from entering the ice maker compartment. Replace if cracked, moldy, or no longer sealing properly. Confirm fit by model.
New Chute gasket but still need bottom gasket as they appear to both need to change. Read more
Seals refrigerator door to prevent cold air loss and maintain temperature. Replace if torn, cracked, or causing ice buildup. Verify fit with your model.
Protective cover assembly for refrigerator slide pantry drawer. Replaces broken, cracked, or missing covers with damaged tabs or clips. Snaps on easily.
The part arrived fully assembled, all we had to do was snap it in. It took less than ten minutes. Read more