Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Plastic grommet that cushions the hinge pin on refrigerator doors. Replace if cracked, worn, missing, or causing door alignment issues.
I removed the door and the hinge assembly from the right side; it turns out the grommet had never been installed and this is what was causing the door to grind down the metal hinge. It was remarkably easy to replace and my door is working perfectly! Read more
Ice buildup on evaporator coils blocking airflow? This defrost heater melts frost during cycles. Moderate DIY repair—allow overnight thaw time first.
I replaced the temperature sensor, the thermo fuse, and the heating element that thaws the evaporator on a cycle to keep the evaporator from freezing up. The most time consuming part of the repair was waiting for the fridge to thaw out so that I could remove the cover. I disconnected the fridge the night before and placed a fan on low with the doors open so that it was thawed out when I awoke. It was easy to remove the evaporator cover once I removed all of the shelves. I took pics as i was... Read more
Replacement axle pin that secures roller wheels to the refrigerator base. Needed when original pin is damaged, corroded, or broken during wheel replacement.
Samsung does not make it easy to replace the casters. The shafts holding the casters are crimped at the ends and had to be cut off with little room for any tools. I had to jack up the fridge and I used a hacksaw blade with a handle to cut through the wheel shafts. I didn't want to use a reciprocating saw. I couldn't find a way to crimp the new shafts so I drilled small holes at the ends and used cotter pins to retain the shafts in place.The rear caster had no room to slide the new one in... Read more
Houses and secures your water filter for clean drinking water and ice. Replace if cracked, leaking, or causing slow flow. Confirm fit with your model number.
New filters did not fix issue and lines were clear. No need to pull fridge out, Changing this part fixed completely and took about an hour. Mostly because I did not find a good step by step to follow. FIRST: Shut off water, but leave power on for inside fridge lighting. 1. Remove two crisper drawers 2. Squeeze two white tabs just under glass shelf in middle filter housing while pulling off front filter cover (has big hole for filter in middle of it). This requires slotted screwdriver to LIGHTLY... Read more
Plastic cover that attaches to the freezer door handle assembly. Replaces cracked, broken, or missing handle covers. Restores door appearance and handle.
Had to take the handle off & replace the plastic piece that the handle is attached to. The part had to be modified slightly & had to pick up new mount holes. The part is on and works fine. Thank you for everything. Read more
The Refrigerator Dispenser Lever is designed to restore the functionality of your Samsung refrigerator's water or ice dispenser. This genuine OEM part ensures a perfect fit and reliable performance, maintaining the convenience you expect from your appliance. Crafted with durability in mind, the dispenser lever withstands daily use, providing smooth and consistent operation. Installing this lever is straightforward, allowing you to quickly get your refrigerator back to optimal working condition. By choosing the Refrigerator Dispenser Lever, you are ensuring compatibility with a range of Samsung refrigerator models, guaranteeing that your dispenser works seamlessly. Whether your original lever is broken, worn out, or missing, this genuine OEM part is the ideal solution to enhance your fridge's functionality and ensure a seamless user experience.
Once I found the hole for the spring arm to go in it took 1 min. Tip: make sure the spring is on the left side pin and, insert it First to insure the spring aligns then use a screw driver to pry out the Right side flange slightly to aide in inserting the right side pin into its hole Read more
This is the plastic end cap that fits onto the left end of your freezer door handle, covering the mounting hardware and giving the handle a clean, finished look. It protects the handle attachment point from damage and keeps the handle assembly secure. Replace it when the cap is cracked, missing, or broken, leaving the handle end exposed or loose.
Replaced cap handle. Repair took less than 5 minutes. Read more
Connects your refrigerator to the wall outlet. Replace if the cord is severed, the plug prongs are broken, or the ground terminal is damaged or missing.
I started by replacing the water filter assembly since it was leaking after I attempted to install a non-name-brand filter. The new assembly didn't fix the problem (but was hard to find, and AppliancePartsPros was amazing in being able to get one). Further, while replacing that I noticed that the previous owner had literally cut out the grounding pin from the power cord. I decided to replace the power cord and the Ice Maker Assembly. None of the online stores seemed to have either part listed... Read more
Plastic bracket that mounts the freezer drawer handle to the drawer front. Replace when cracked, broken, or missing to reattach your handle securely.
There's a piece of plastic with an embedded metal nut that is screwed on to the handle at both ends of the handle. These nuts lock on to screws on the drawer. Problem is that these plastic parts are flimsy and they broke at both the left and right ends and the handle just came loose. It was a two minute job to unscrew these plastic parts from the handle and screw in the replacements. Once that's done you can attach the handle to the drawer (need a hex key). Read more
Secures refrigerator door handle to the door panel. Replace if plate is cracked, stripped threads prevent handle attachment, or handle loosens repeatedly.
The Refrigerator Thermal Fuse Assembly is an essential component designed to maintain the safety and efficiency of your refrigerator. This genuine OEM part from Samsung acts as a critical safeguard against overheating by interrupting the power supply if the temperature exceeds safe levels. By ensuring optimal temperature control, the thermal fuse assembly helps protect your appliance and preserve the freshness of your food, enhancing the overall lifespan of your refrigerator. Engineered specifically for Samsung refrigerator models, this thermal fuse assembly guarantees a precise fit and straightforward installation process. Replacing a malfunctioning thermal fuse with this genuine OEM part ensures reliable performance and peace of mind. Whether your refrigerator is experiencing inconsistent cooling or unexpected shutdowns, the Refrigerator Thermal Fuse Assembly provides a dependable solution to restore your appliance's functionality efficiently. Trust in this high-quality component to keep your refrigerator running smoothly and your kitchen operating seamlessly.
Upper left door hinge assembly for refrigerators. Secures and supports the upper door. Replace if broken, cracked, or worn to restore door alignment.
Ordered a replacement hinge. Read more
Front caster wheel for refrigerators. Installs at the base to allow smooth rolling and repositioning. Replace if wheel is cracked, broken, or won't roll.
Used the video with the parts and replaced the wheels. The only thing we did wrong was using the front wheel axle instead of the back wheel axle on the back wheels. I will just order two more front wheel axles which are longer than the back axle. Thank you for the video, it made this repair easier. Read more
Seals your freezer door to prevent cold air loss and ice buildup. Replace when torn, loose, or door opens too easily. Confirm fit with your model number.
Purchased two new gaskets and replaced them. Hoping upper door will seal better and will pull open a little harder then before.Right now it pulls open very easy and I feel that it should pull harder. The freezer seems to be a lot better with little to no ice forming. I have been looking for information to see if there is something to put on gasket to make the pull on the door a little harder. Any suggestions would be greatly appreciated. ... Read more
Fix a refrigerator that won't dispense water or ice with this dispenser switch. Requires removing the display cover and disconnecting housing connectors.
I replaced the control board and the microswitch. Read more
Secures the glass panel over your refrigerator's crisper drawers. Replace if cracked, broken, or missing to restore proper shelf support and appearance.
Order a new fixer Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.