Rgs257aars Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Best Seller

Genuine Frigidaire part

Oven Bake Element

4.9 (416)

By: Frigidaire

Part Number: 5303051519

The bake element is an OEM replacement part for Frigidaire ovens. This element is located at the bottom of the oven cavity and is responsible for providing the heat needed for baking. When the oven is turned on, electrical current flows through the bake element, causing it to heat up and glow red. This process radiates heat evenly throughout the oven, ensuring that food is cooked thoroughly and uniformly.

Causes of a bad Oven Bake Element include visible damage such as blistering or holes, which can occur after years of use or from food spillages that corrode the metal. Additionally, a malfunctioning element may not glow red or may only partially heat, indicating that it's unable to conduct electricity effectively.

Symptoms of a bad Oven Bake Element include:

The oven not heating up properly or at all
Uneven cooking or baking results
The element not glowing when the oven is turned on

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This part fixes the following symptoms

Oven not heating evenly
Oven is too hot
Little to no heat when baking
Element will not heat

Do-It-Yourself Stories from Customers like You Lower element not getting hot enough on electric range Richard H. • North Lewisburg , OH • February 14, 2020

Ordered spare part that actually fit my oven. Arrived in three days from next state over. Unplugged power cord, removed racks, used 1/4" socket on ratchet with 6 inch extension to remove two sheet metal screws at lower back of oven. Pulled old element out 2 inches then tilted front of element up 45 degrees for spade connectors to clear holes at back of oven. Once clear, pulled element forward until the white #16 wires pulled through the openings in the oven (inside at the back). By hand, gently... Read more

$34.95

Compare At:: $41.59
You Save:: $6.64

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Blower Wheel

4.8 (130)

By: Whirlpool

Part Number: WP694089

The Blower Wheel is an OEM part for Whirlpool dryers. This component is crucial for the proper circulation of hot air within the dryer drum, ensuring efficient drying of clothes by directing airflow through the drum and out the exhaust.

Common causes of a bad blower wheel include accumulated lint and debris obstructing the wheel, physical damage from foreign objects, or general wear from prolonged use. A faulty blower wheel can significantly reduce drying efficiency and may cause the dryer to overheat.

Symptoms of a bad blower wheel include:

Longer drying times for clothes
Unusual noises during the drying cycle
Overheating of the dryer
Poor airflow from the dryer vent

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Will not tumble
Takes too long to dry
Noisy

Do-It-Yourself Stories from Customers like You Broken blower wheel on dryer Mark B. • Independence , WV • April 12, 2014

I FOUND the website on t internet, found my part ordered it and watched the how to video ,repaired the dryer myself. Awesome Website. Read more

$33.48

Compare At:: $39.84
You Save:: $6.36

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Lint Screen Housing Foam Seal

4.9 (108)

By: Whirlpool

Part Number: WP339956

The Lint Screen Housing Foam Seal is an OEM part for Whirlpool dryers. This seal is placed around the lint screen housing to prevent air leaks and ensure that the dryer operates efficiently by directing airflow properly through the lint screen. By maintaining a tight seal, this foam helps to optimize the dryer’s performance, reduce drying times, and prevent lint from escaping into the internal parts of the dryer, which can lead to potential maintenance issues and decreased efficiency.

Symptoms of a failing lint screen housing foam seal include:

Increased lint buildup inside the dryer beyond the lint screen
Longer drying times due to inefficient air circulation
Excessive heat and humidity within the dryer

Causes of foam seal deterioration typically involve normal wear and tear, exposure to high heat which can degrade the material, or improper maintenance that can tear or dislodge the foam.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Takes too long to dry
No heat or not enough heat

Do-It-Yourself Stories from Customers like You Gas dryer did not heat and excessive lint inside the unit James C. • New Boston , MI • July 20, 2017

Our 19 year old Whirlpool dryer quit heating. After checking the thermal fuse, I found the ignitor electrically open. I bought an ignitor at a local store as there was a national holiday the next day and I did not want the dryer inoperative waiting several days for shipping. I can say AppliancePartsPros is MUCH cheaper for the identical Whirlpool genuine part. While changing the ignitor, I noticed there was an excessive amount of lint in the dryer, which was caused by worn drum seals. I ordered... Read more

$10.43

Compare At:: $12.41
You Save:: $1.98

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Oven Igniter

4.9 (251)

By: Whirlpool

Part Number: 74007498

The Oven Igniter is an OEM part for Whirlpool ovens, designed to ignite the gas in the oven burner, allowing it to heat. This crucial component is responsible for creating the spark that starts the combustion process, enabling your oven to reach the desired temperature for baking or broiling.

Causes of a bad oven igniter include wear and tear from regular use, a buildup of residue that can inhibit the igniter's ability to heat properly, or electrical issues that prevent the igniter from drawing enough current.

Symptoms of a bad Oven Igniter include:

Oven not heating up at all
Oven takes longer than usual to heat up
Gas smell when the oven is turned on, indicating gas is not igniting

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

Little to no heat when broiling
Gas igniter glows, but will not light
Gas smell
Little to no heat when baking

Do-It-Yourself Stories from Customers like You Oven ignigter not working. Joan R. • Mount Judea , AR • March 20, 2014

I used the little video clip shown under the part and replaced it myself. Read more

$52.95

Compare At:: $84.49
You Save:: $31.54

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Bearing Ring For Front Support

4.8 (92)

By: Whirlpool

Part Number: 279441

The Bearing Ring for Front Support is an OEM part for Whirlpool dryers. It provides support and stability to the dryer's front drum. The bearing ring helps to reduce friction and ensure smooth rotation of the drum during the drying cycle. It helps to maintain proper alignment and balance, preventing excessive noise and vibration during operation.

A bad bearing ring can occur due to wear and tear over time, high usage, or damage from foreign objects getting caught in the drum. If the bearing ring becomes worn, cracked, or damaged, it can lead to loud squeaking or grinding noises coming from the dryer.

Symptoms of a bad bearing ring for front support include:

Loud squeaking or grinding noises during operation.
Excessive vibration or shaking of the dryer.
Difficulty in rotating the drum manually.
Visible damage or wear on the bearing ring.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

Marks left on clothes

Do-It-Yourself Stories from Customers like You Gas dryer did not heat and excessive lint inside the unit James C. • New Boston , MI • July 20, 2017

$53.95

Compare At:: $64.20
You Save:: $10.25

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Motor Pulley

5.0 (42)

By: Whirlpool

Part Number: WP8066184

The Motor Pulley is an OEM part for Whirlpool dryers, connects the dryer motor to the drum belt, enabling the drum to turn and efficiently dry your clothes. This pulley is crucial for the smooth operation of the dryer, ensuring that the belt is tensioned correctly and runs smoothly without slipping or causing wear.

Causes of a bad Motor Pulley include wear and tear from regular use, a buildup of lint and debris that can interfere with its operation, or a malfunctioning dryer motor that puts undue stress on the pulley.

Symptoms of a bad Motor Pulley include:

Unusual noises coming from the dryer, such as squeaking or grinding
The dryer drum failing to turn even though the motor is running
The dryer taking longer than normal to dry clothes, which can occur if the pulley is not providing proper tension to the belt

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You The drum belt was broken and the motor pulley for belt also i Preston R. • Kinston , NC • May 08, 2015

I WENT ON-LINE & FOUND APPLIANCE STORE,THEY HAD MY PARTS, I ORDERED, THEY WERE SHIPPED IMMEDIATELY,WITHIN UNDER TWO DAYS.THIS WAS EXACTLY WHAT THEY SAID THEY WOULD DO.ALSO THE REPAIR VIDEO SHOWED ME HOW TO RUN THE BELT ON THE TENSIONER,I WAS AMAZED AT HOW SIMPLE & QUICK EVERYTHING WENT BACK TOGETHER.THANKS APPLIANCE STORE FOR BEING THEIR TO HELP ME GET MY GRANDSON"S DRYER BACK WORKING,I GIVE YOUR SITE A < A+ >. Read more

$38.95

Compare At:: $45.96
You Save:: $7.01

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Dryer Light Bulb

4.9 (119)

By: Whirlpool

Part Number: WP22002263

The Dryer Light Bulb is an OEM part for Whirlpool dryers. This bulb is specifically designed to provide illumination inside the dryer drum, allowing for better visibility when loading and unloading laundry. It ensures a well-lit drying environment.

Causes of a bad dryer light bulb can include normal wear and tear, electrical issues, or accidental breakage.

Symptoms of a bad dryer light bulb may include:

The bulb not turning on when the dryer door is open.
Dim or flickering light inside the dryer drum.
A burnt-out or broken bulb.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Squeaky noise and not fully drying David H. • Santa Clarita , CA • September 20, 2019

Originally the dryer was squeaking a lot, so I purchased a new belt tensioner, but the original tensioner was an old-style no wheel tensioner, so that wasn't the source of the squeaking. I saw a lot of lint had built up inside the unit where there shouldn't have been that much. So I viewed a few videos on the Appliance Pros site and saw that the rear wheel guides were the cause of the squeaking and the rear felt drum and blower housing seal needed to be replaced. The rear blower housing was... Read more

$15.55

Compare At:: $18.50
You Save:: $2.95

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Lint Screen

5.0 (132)

By: Whirlpool

Part Number: WP349639

The Lint Screen is an OEM part for Whirlpool dryers. It is crucial for trapping lint and debris from clothes during the drying process, helping to prevent these materials from clogging the dryer vent or causing potential fire hazards. This lint screen measures approximately 20 1/2" x 7 1/2".

Symptoms of a bad Lint Screen include:

Tearing or holes in the screen that allow lint to pass through
Excessive lint accumulation in the dryer or vent
The dryer taking longer than usual to dry clothes

Causes of a bad lint screen can stem from normal wear and tear, improper cleaning practices that lead to build-up and degradation, or accidental damage during handling.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Note: For the 19 inch long filter order 339392V.

Do-It-Yourself Stories from Customers like You Needed replacement lint filter for a 12 yr old whirlpool dryer (screen separated from frame) Paul K. • Cobbs Creek , VA • April 19, 2015

Removed old lint filter, inserted new one. Read more

$41.95

Compare At:: $49.92
You Save:: $7.97

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Left Drum Roller Shaft

4.8 (66)

By: Whirlpool

Part Number: WPW10359270

The Drum Support Roller Shaft - Left is an OEM part for Whirlpool dryers. It is specifically designed to support the drum roller, ensuring smooth rotation of the dryer drum during operation. This shaft is essential for maintaining the drum's alignment and stability, allowing for effective and efficient drying of clothes.

Causes of a bad drum support roller shaft can include wear and tear from regular use, accumulation of lint and debris, or damage from overloading the dryer. These factors can lead to the shaft becoming worn out or bent, impairing the dryer’s performance.

Symptoms of a bad drum support roller shaft include:

Squeaking or grinding noises during the drying cycle
The dryer drum not rotating smoothly or being off-balance
Increased drying times or incomplete drying of clothes

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Old appliance with worn drum roller shafts and rollers Macario M. • Kingsville , TX • December 17, 2021

Use the videos on this website here and you can repair most brands. Many are duplicate in design. 1. Unplug the machine. 2. Move it away from a confined area to get more room. 3. Remove lint filter and the two screws that hold the exhaust filter port to the top of the cabinet. 4. Use a putty knife or actually a butter knife and release the top of the cabinet from the main drum housing. You will slide the knife between the top and the main cabinet at the plastic catches. Look for them and you... Read more

$48.95

Compare At:: $58.25
You Save:: $9.30

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Door Switch

4.9 (98)

By: Whirlpool

Part Number: W10820036

The Washer Door Switch is an OEM part for Whirlpool washing machines. This component is crucial for ensuring the washer operates safely by detecting whether the door is open or closed. The door switch prevents the washer from starting or continuing its cycle when the door is open, and it allows the machine to function only when the door is securely closed.

Symptoms of a failing Washer Door Switch include:

The washer not starting or stopping unexpectedly during a cycle
Error codes related to door closure issues displayed on the washer's control panel
The washer door not locking properly or the lock mechanism not engaging
The washer continuing to operate with the door open

Causes of a bad door switch can include wear and tear from frequent use, damage from repeated opening and closing of the door, electrical faults such as short circuits, or physical damage from mishandling or impact.

This OEM Whirlpool part is also compatible with some models from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore.

This part fixes the following symptoms

Will not drain
Pumps but will not spin
Timer will not advance
Doesn't shut off

Do-It-Yourself Stories from Customers like You Sometimes the washer wouldn't start the wash cycle when the fill cycle was done it would just sit until the lid was picked up or bumped Eugene N. • Roswell , NM • August 28, 2016

The lid shut-off switch is located behind the lid How About That. I order the plastic ball the hold the lid in place plus the lid shut off switch. I watched the video that AppliancePartsPros.com has on how to replace the lid and the plastic balls. I removed the lid to get to the two philips head screws to remove that part of the shut-off switch. I took the new switch out of the package and compared it to the old switch. I assembled the switch just like the old switch look using the new... Read more

$20.95

Compare At:: $32.43
You Save:: $11.48

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Wci part

Light Bulb (40W)

4.9 (87)

By: Wci

Part Number: 316538904

The Light Bulb (40W) is an OEM part for Frigidaire appliances. Specifically designed to fit and function with Frigidaire models, this 40-watt bulb illuminates the interior of your oven, making it easier to check on the progress of your baking or roasting without opening the oven door.

Over time, oven light bulbs can burn out or be damaged from high temperatures or accidental bumps during cleaning or cooking. A functioning light bulb is crucial for the optimal operation of your oven, enhancing visibility and improving your cooking experience.

Symptoms of a bad Light Bulb include:

The oven interior remains dark when the light switch is engaged.
Flickering light, indicating a loose connection or nearing the end of the bulb's lifespan.
Completely non-functional light, which can hinder your ability to monitor cooking progress.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Do-It-Yourself Stories from Customers like You The bottom heating element wasn't working in top oven Kevin Scott W. • Parker , CO • January 09, 2015

Before we replaced the board, my wife tried to replace just the element. We had one we had ordered several years ago when this same thing happened. When that didn't work we replaced the board and could see where the old board was damaged so we figured this was the solution. It would have been except the bottom element my wife used to replace the old element (which was fine but had been thrown out figuring the new one was new so why keep the old one) was 1" shorter in the back than the old... Read more

$23.95

Compare At:: $28.74
You Save:: $4.79

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Seal

4.9 (73)

By: Whirlpool

Part Number: W11415783

The Seal is an OEM part for Whirlpool dryers. This specific seal is designed to fit around the blower housing, ensuring a tight seal that prevents air leaks within the dryer. The blower housing is a critical component of the dryer's air circulation system, which moves air through the drum to dry clothes efficiently.

Causes of damage to the Seal can include wear and tear from regular use, excessive heat degrading the material over time, or improper maintenance practices that can cause physical damage to the seal.

Symptoms of a bad Seal include:

Longer drying times than usual
Excessive heat buildup in the dryer
Unusual noises from the dryer, such as rattling or buzzing

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Gas dryer did not heat and excessive lint inside the unit James C. • New Boston , MI • July 20, 2017

$16.75

Compare At:: $19.93
You Save:: $3.18

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Door Seal

4.9 (25)

By: Whirlpool

Part Number: W10861521

Note: If your original door seal was rubber, please note that the factory has changed this to a fiberglass seal. The factory also recommends adhesive part# WPY055980 to install.

The Dryer Door Seal is an OEM part for Whirlpool dryers. It forms a tight seal around the dryer door, preventing heat and moisture from escaping during the drying cycle. This helps maintain optimal drying efficiency and protects the surrounding components from excess moisture.

Causes of a bad dryer door seal can include wear and tear from regular use, damage from repeated opening and closing of the door, or degradation due to exposure to high temperatures over time.

Symptoms of a bad dryer door seal include:

Heat escaping from the dryer
Longer drying times
Moisture buildup around the dryer door
Visible cracks or gaps in the seal

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Gasket frayed on dryer. Ray B. • Bellbrook , OH • October 16, 2017

Purchased the gasket, but upset with myself I forgot the high temp adhesive.....a 13$ part and now 7$ for shipping. Think not for my mistake Read more

$48.95

Compare At:: $58.74
You Save:: $9.79

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Screen

4.9 (7)

By: Whirlpool

Part Number: W11778253

This replacement screen fits into the appliance's filtration path. It captures debris to protect internal components and helps restore proper airflow or water flow when the original screen is torn, warped, clogged, or missing.

Filters debris to prevent it from entering sensitive components such as pumps, blowers, or valves
Helps maintain proper airflow or water circulation for consistent performance
Common failure signs: torn mesh, cracked or warped frame, debris bypassing the screen
Can contribute to longer cycles, reduced performance, or recurring clogs when damaged or missing

What's included: 1 screen Install notes:

Disconnect power to the appliance; turn off water supply if applicable
Access the screen location per your model's instructions; remove the old screen and clean the housing
Seat the new screen fully, ensuring correct orientation and that any tabs/locks engage
Reassemble and test for proper operation; check for leaks or airflow restrictions

Do-It-Yourself Stories from Customers like You The lint screen was torn Thomas P. • Cleveland , TN • December 19, 2022

Bought an OEM replacement. Cost more than the aftermarket part but fit perfectly. Read more

$32.64

Compare At:: $35.74
You Save:: $3.10

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

High Limit Thermostat Kit

4.9 (62)

By: Whirlpool

Part Number: W11050897

The High Limit Thermostat Kit is an OEM replacement part for Whirlpool dryers. This kit includes a thermostat that is designed to prevent the dryer from overheating by monitoring the temperature inside the dryer drum. If the temperature exceeds a safe level, the high limit thermostat cuts off power to the heating element, ensuring the appliance operates within safe parameters and protecting it from potential damage.

Over time, the high limit thermostat can wear out or fail due to repeated cycling and exposure to high temperatures. Electrical surges, buildup of lint and debris, or faulty wiring can also cause the thermostat to malfunction, potentially leading to overheating or inadequate drying performance.

Symptoms of a bad high limit thermostat include:

The dryer not heating or only producing intermittent heat
The dryer shutting off unexpectedly during a cycle
Clothes taking longer than usual to dry
The dryer running excessively hot or not hot enough
Error codes related to temperature issues appearing on the display panel

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Dryer flame would go out after a few minutes Robert B. • Eben Junction , MI • June 05, 2015

Purchased, Igniter Kit, Gas Valve Coil Kit, and as a precaution Thermal Fuse and Cutoff-Tml. Was pretty confident the problem was the gas valve coil, but figured that why not just replace the other items while I had the unit apart. Researching and utilizing this site certainly helped me out in figuring what the problem may be. Watched the instruction videos which were very detailed and helpful. The replacement and repair was not that difficult and the work was done rather quickly. Doing... Read more

$15.66

Compare At:: $18.79
You Save:: $3.13

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Drum Support Roller Shaft - Right

4.8 (49)

By: Whirlpool

Part Number: WPW10359269

The Drum Support Roller Shaft - Right is an OEM part for Whirlpool dryers. This shaft provides support for the drum roller, allowing the dryer drum to rotate smoothly and efficiently during drying cycles.

You should replace the drum support roller shaft if it becomes worn, bent, or damaged. Causes of a bad drum support roller shaft can include regular wear and tear, overloading the dryer, or exposure to high temperatures, which can affect its structural integrity.

Symptoms of a bad drum support roller shaft include:

Unusual noises such as squeaking or grinding during operation
The dryer drum not rotating smoothly or becoming stuck
Excessive vibration or wobbling of the dryer drum
Visible wear or damage on the roller shaft

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Old appliance with worn drum roller shafts and rollers Macario M. • Kingsville , TX • December 17, 2021

$48.95

Compare At:: $58.25
You Save:: $9.30

IN STOCK

Ships Today Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Rgs257aars Parts

Oven Bake Element

Blower Wheel

Lint Screen Housing Foam Seal

Oven Igniter

Bearing Ring For Front Support

Motor Pulley

Dryer Light Bulb

Lint Screen

Left Drum Roller Shaft

Door Switch

Light Bulb (40W)

Seal

Door Seal

Screen

High Limit Thermostat Kit

Drum Support Roller Shaft - Right