Rswa228a Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Best Seller

Genuine Whirlpool part

Evaporator Fan Motor (Refrigerator)

4.9 (10)

By: Whirlpool

Part Number: WP61004888

This evaporator fan motor circulates cold air across the evaporator coils and through the freezer and fresh-food sections to maintain even temperatures. Replacing a failed or noisy motor restores proper airflow and dependable cooling performance.

Drives the evaporator fan blade to move air over the coils and throughout the cabinet
Helps maintain consistent temperatures between freezer and refrigerator compartments
Failure symptoms include weak/no airflow, the fan not running, loud squealing/rumbling, or the fresh-food section warming up
Poor airflow can also lead to frost or ice buildup on the freezer back panel

What's included: 1 evaporator fan motor Install notes:

Disconnect power before servicing; wear cut-resistant gloves and eye protection
Access the motor behind the freezer's rear panel; use caution around sharp metal and evaporator fins
Note wire positions; transfer the fan blade and any brackets/grommets from the original motor; secure wiring connections
Ensure the blade spins freely; engage the door switch when testing and strong airflow after reassembly

This part fixes the following symptoms

Noisy
Freezer section too warm
Fridge too warm

Do-It-Yourself Stories from Customers like You Evaporator fan motor noisey 15 years old Jack R. • Ithaca , MI • May 19, 2014

Removed back panel in freezer compartment. Held on by four hex head screws. Disconnected wire assembly from panel and then replaced evaporator fan motor on kitchen table. Evaporator fan motor is attached to back side of freezer panel by four hex head screws. Easy repair to do.It took me about 30 minutes to do the repair. Read more

$79.95

Compare At:: $95.14
You Save:: $15.19

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Screw

4.7 (6)

By: Whirlpool

Part Number: WP489478

Size: 8 x 1/2 ab.

Do-It-Yourself Stories from Customers like You Wanted to update wood paneled compactor Julie S. • San Antonio , TX • December 09, 2014

Removed the handle with two screws on the inside front and pulled out the custom wood panel. Pulled the compactor out from under cabinet. Tipped it over on back of unit, supporting it with a little foot stool. Unscrewed two lower screws at bottom of unit holding black trim panel (that held wood panel in place) and lower black rubber flap. Removed two screws on lower outside side of unit that held the foot pedal. Slid off black U shaped metal frame from top of compactor towards bottom. Slid on... Read more

$5.95

Compare At:: $7.02
You Save:: $1.07

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Screw, 1 Piece

4.9 (18)

By: Whirlpool

Part Number: W11233072

This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.

Fastens panels, brackets, covers, or internal parts to the chassis or frame
Helps maintain alignment and support, reducing rattle, vibration, or looseness
Replaces missing or damaged screws that have backed out, broken, or stripped
Restores secure mounting after service when original hardware is lost

What's included: 1 screw Install notes:

Disconnect power; shut off water or gas supplies before servicing
Use the correct driver; start threads by hand to avoid cross-threading
Match length and thread to the original location; do not substitute with longer hardware
Tighten snugly; do not overtighten into plastic or thin metal

Do-It-Yourself Stories from Customers like You Bake element broken on jenn air model s125 downdraft slide in range Patricia D. • Raleigh , NC • May 02, 2015

Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more

$20.95

Compare At:: $24.93
You Save:: $3.98

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Defrost Timer

4.9 (15)

By: Whirlpool

Part Number: WP68233-3

This defrost timer controls the automatic defrost cycle in select refrigerators and freezers, switching between cooling and defrost to clear frost on the evaporator. It helps maintain stable temperatures and prevents heavy ice buildup and long run times. What it does:

Alternates the system between cooling and defrost on a timed schedule
Sends power to the defrost heater during defrost, then returns power to the compressor and fans
Failure can cause heavy frost on the evaporator/back freezer wall
May lead to warmer temperatures, constant running, short cycling, or no-cool if stuck in defrost

What's included:

1 defrost timer

Install notes:

Disconnect power before servicing
Access location varies by model
Note wire positions and transfer them one at a time to the new timer
Mount securely in the same orientation as the original and verify normal cycling after power is restored

This part fixes the following symptoms

Freezer not defrosting

Do-It-Yourself Stories from Customers like You The refrigerator was operating in an unusual manner. The freezer would get abnormally cold even when set at the warmest temp on the dial. Then the refrigeration area was too warm. Greg T. • Boulder , MT • March 23, 2014

I took the bottom tray out of the freezer and found the coils iced up severely. I was reasonably sure the defrost timer was the problem and your tech said that was a good possibility. Ordered and replaced timer. (15 minutes) Problem fixed!!! Saved purchasing a new fridge at big bucks. We live over 40 miles from a service center so the cost of having a tech come out is astronomical. Thanks!!! Read more

$108.74

Compare At:: $129.40
You Save:: $20.66

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Compression Nut - 1/4 Inch

5.0 (4)

By: Whirlpool

Part Number: WP627018

Size: 1/4 inch. Nut for plastic water line.

Do-It-Yourself Stories from Customers like You Broken y connector off of water valve on amana refridgerator Greg S. • El Dorado Hills , CA • October 19, 2014

Ordered part from AppliancePartsPros.com and received it 2 days later. Put the part in, fit like a glove, water and ice cube maker working flawlessly again with no leaks. Thanks. Read more

$11.95

Compare At:: $14.34
You Save:: $2.39

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Water Supply Line

4.8 (8)

By: Whirlpool

Part Number: WPB5705307

Ice maker water line: 1/4x 8ft.

This part fixes the following symptoms

Leaking

Do-It-Yourself Stories from Customers like You Water leak and broken parts inside refrigerator Todd B. • Indianapolis , IN • August 28, 2017

Replaced the broken parts. The water leak was caused by the drain valve not directed into drain pan Read more

$16.95

Compare At:: $20.00
You Save:: $3.05

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Speed Clip (Screw Retainer), 1 Clip

4.8 (4)

By: Whirlpool

Part Number: WPM0114003

This speed clip is a small retainer that slides over a panel edge to provide a captive thread for a screw. Replacing a worn or missing clip restores a tight, rattle-free hold on the attached component. What it does:

Slides over a panel or bracket to create a captive thread for a mounting screw
Maintains tension to resist vibration and loosening
Helps when a screw spins or won't tighten due to a missing retainer
Addresses loose, rattling, or misaligned panels or trim

What's included:

1 speed clip

Install notes:

Disconnect power and, if applicable, shut off water before servicing
Note the original clip's location and orientation for correct fit
Fully seat the clip on the edge; start the screw by hand to avoid cross-threading
Do not overtighten; ensure the component is secure and noise-free

Do-It-Yourself Stories from Customers like You Water was leaking & then freezing in the bottom of the freezer compartment Ronald S. • Frankfort , IL • December 30, 2014

Replaced the water tube that went from the plastic tubing to the ice cube tray. Found that even though it was the same exact length as the original, there was only an extremely small gap from the end of the tube to a splash board. This may have been the root cause of my problems. Read more

$11.95

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Drier

5.0 (2)

By: Whirlpool

Part Number: WPW10143759

Do-It-Yourself Stories from Customers like You Failed to cool due to hole/s in evaporator leaking freon Gerald L. • Myrtle Beach , SC • August 17, 2017

Ordered new Evaporator part and Drier from Appliance Pros. The part arrived earlier than expected and was properly packaged. I had both parts installed by a professional as they required a level of expertise above my capabilities. Works perfectly. Read more

$28.23

Compare At:: $33.59
You Save:: $5.36

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Light Bulb

5.0 (5)

By: Whirlpool

Part Number: W10887190

This replacement light bulb restores clear, reliable illumination so you can see contents and monitor appliance operation. Replace a burned-out, dim, or flickering bulb to bring visibility back to the area it lights. What it does:

Provides illumination in the appliance's interior or designated lighting location
Makes it easier to see contents and check status at a glance
Common symptoms: light won't turn on, intermittent/flickering light, dim or blackened bulb

What's included:

1 light bulb

Install notes:

Disconnect power before servicing; allow hot surfaces and the old bulb to cool completely
Remove any lens/cover, then remove the old bulb
Install the new bulb securely without overtightening; reinstall the lens/cover if present
Restore power and test operation

Do-It-Yourself Stories from Customers like You My bulb was out in my whirlpool fridge Beth K. • Glendale , NY • November 07, 2014

I'm way too lazy to go to a store and look at a gigantic wall of light bulbs. So I poured a glass of wine, googled the make and model of my refrigerator followed by "lightbulb" and this bulb came up. If you're tracking the full length of this project you'll be interested to note that I held up the bulb for roughly 3 seconds to conclude it was the right one. *don't drink too much wine before this part. I counted the bulbs in my fridge/freezer (also do this before too much wine) and decided I... Read more

$16.95

Compare At:: $20.34
You Save:: $3.39

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Compressor Start Relay (Ptc)

5.0 (5)

By: Whirlpool

Part Number: WP10097204

This PTC start relay mounts on the compressor and briefly powers its start winding to get it running, then drops out. Replacing a weak relay can restore reliable starts and resolve clicking/humming with no cooling.

Provides the initial boost to the compressor via a positive temperature coefficient (PTC) element, then opens as it heats
Takes the start winding out of the circuit once the compressor is running
Typical failure symptoms: compressor won't start, repeated clicking/humming, no cooling, visible heat damage at the relay or connector
Direct replacement for the original PTC start device used on applicable models

What's included: 1 PTC start relay Install notes:

Disconnect power before servicing; allow hot components to cool
Access the compressor compartment, remove the cover, and note the relay's orientation; pull the old relay straight off the compressor pins
Inspect wiring terminals for heat damage; do not reuse burnt connectors
Firmly seat the new relay on the compressor terminals, reinstall the cover, restore power, and verify compressor start

Do-It-Yourself Stories from Customers like You The refrigeration compressor wopuld not run the motor was heating up and it would open up the thermal oveload David P. • Seekonk , MA • February 07, 2015

I replaced the Relay-Ptc and that solved the problem. I could see that there was a problem with the relay because it was arcing inside and you could see a glow coming from the inside. when I removed it from the compressor I shook it and I could hear it rattling and news for sure it was the problem Read more

$75.95

Compare At:: $90.38
You Save:: $14.43

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Ice Stripper (Ejector)

5.0 (5)

By: Whirlpool

Part Number: WP2182124

Ice stripper removes ice cubes from the ice maker mold so the dispenser or storage bin fills properly. Replacing a worn or broken stripper helps the ice maker eject cubes cleanly and reduces ice jams or stuck cubes. What it does:

Pushes or guides harvested cubes out of the ice mold into the bin during the ice maker's harvest cycle.
Prevents cubes from sticking in the mold; a damaged stripper can cause incomplete ejection or leftover ice in the mold.
Works with the ice maker's ejector mechanism to maintain consistent cube release and storage.
A faulty or broken stripper may lead to noisy operation, partial fills, or visible ice build-up in the mold.

What's included: One ice stripper. Install notes:

Disconnect power to the appliance before starting any repair to avoid electrical shock.
Remove the ice maker or access panel per the manufacturer's instructions to reach the stripper; keep small parts and screws organized.
Inspect the ice mold and surrounding components for damage or ice build-up; clear ice before installing the new stripper.
After installation, restore power and run a test harvest cycle to ensure proper cube ejection.

Do-It-Yourself Stories from Customers like You Ice stripper was broken on ice maker John A. • Baton Rouge , LA • March 12, 2015

Checked out the video on your site on how to disassemble the ice maker. Was really easy when you know the correct sequence. Only 3 screws and it's out of the freezer. Disassembled the ice maker on my kitchen counter and replaced the ice stripper. Reassembled and installed back in my freezer. It is as good as new Read more

$47.95

Compare At:: $57.06
You Save:: $9.11

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Water Line Union

4.8 (9)

By: Whirlpool

Part Number: WP4373559

Size: 5/16 to 1/4. Universal John Guess Push On

This part fixes the following symptoms

Leaking

Do-It-Yourself Stories from Customers like You Refrigerator leaked under the left front grill. Charles K. • Windermere , FL • April 06, 2014

Every once in a while we'd get a small leak just under the left side (freezer door). I moved the fridge out and saw the water stain towards the front of the unit. Carefully removing the grate (see the video on how to do this so you don't snap the plastic brackets. They are part of the grate and there is one on the left and one on the right, centered from top to bottom.) Anyway the problem was visible. There is a water tube that runs into the door and presumedly up to the water dispenser. ... Read more

$40.95

Compare At:: $48.73
You Save:: $7.78

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Ice Housing Support

5.0 (1)

By: Whirlpool

Part Number: WP2195914

This support mounts in the dispenser area to secure the ice housing assembly. It helps keep the chute and door properly aligned so ice dispenses smoothly and the opening seals as designed.

Supports and positions the ice housing/chute assembly in the freezer door
Helps maintain proper alignment and sealing of the ice door/flapper
Reduces wobble or flex that can affect dispensing performance
Typical signs it may be needed: loose or misaligned dispenser housing, ice or air leaking at the chute, frost buildup around the dispenser, inconsistent ice dispensing

What's included: 1 ice housing support Install notes:

Disconnect power to the refrigerator before servicing
Remove the dispenser trim/control to access the housing; handle wiring and tabs carefully
Remove mounting fasteners, replace the support, and transfer any reusable hardware
Reassemble, restore power, and test ice dispensing and chute seal

Do-It-Yourself Stories from Customers like You Dark bits of something embedded in the ice cubes and a crack in one of the plastic pieces of the ice maker Brett G. • Willow Park , TX • October 09, 2017

Replaced the ice tray and motor mount plate. While I was there I replaced the thermostat also. New parts arrived in a day and a half. Read more

$48.95

Compare At:: $58.74
You Save:: $9.79

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Screw (Mounting)

5.0 (2)

By: Whirlpool

Part Number: W10856122

This replacement screw secures panels, brackets, or trim on compatible Whirlpool appliances to restore proper fit and reduce rattles and movement. Use it when a fastener is missing, loose, or stripped. What it does:

Secures appliance panels, trim pieces, brackets, or small components in place
Restores proper fit to eliminate rattling, gaps, or shifting parts
Replaces missing, worn, or damaged screws that compromise mounting
Matches OEM form and function when the correct screw is specified for the repair

What's included: One screw Install notes:

Turn off power to the appliance before working near controls, heating elements, or wiring
Use the correct screwdriver or bit to avoid stripping the head; do not overtighten
Keep removed screws in a container to ensure none are lost during reassembly

Do-It-Yourself Stories from Customers like You Door not closing properly Dan T. • Boring , OR • January 03, 2015

Watched the video at Appliance Parts Pros. Followed the video. I was fixing the refrigerator door (a little easier then the freezer door). The repair was very simple and took less then 15 minutes. Read more

$7.95

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Nut

4.0 (1)

By: Whirlpool

Part Number: WP486692

The Nut is an OEM replacement part for Whirlpool refrigerators. This small yet essential component is used to secure various parts of the refrigerator, such as shelves, panels, or brackets, ensuring stability and proper alignment. Its durable design ensures reliable performance in the demanding environment of a refrigerator.

Causes of a bad or missing Nut can include wear over time, accidental stripping of threads, or loss during maintenance or repairs. A damaged or missing nut can lead to loose components and reduced functionality.

Symptoms of a bad or missing Nut include:

Loose or wobbly shelves, brackets, or panels
Difficulty keeping refrigerator components securely in place
Rattling or unusual noises during operation

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Condenser cooling motor fan was making noise occasionally stopping Jeffrey S. • Montgomery , TX • June 26, 2016

Replaced motor, fan and lock-nut. My repair was on a built in Refrigerator-Freezer so most of the time was spent on pulling out and putting back the unit to get to the area I needed to behind the upper top. Read more

$5.95

Compare At:: $7.08
You Save:: $1.13

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Genuine Whirlpool part

Screw

By: Whirlpool

Part Number: WP489128

Screw: 8-16 x 3/8 inch.

$7.95

Compare At:: $9.54
You Save:: $1.59

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Rswa228a Parts

Evaporator Fan Motor (Refrigerator)

Screw

Screw, 1 Piece

Defrost Timer

Compression Nut - 1/4 Inch

Water Supply Line

Speed Clip (Screw Retainer), 1 Clip

Drier

Light Bulb

Compressor Start Relay (Ptc)

Ice Stripper (Ejector)

Water Line Union

Ice Housing Support

Screw (Mounting)

Nut

Screw