Sca10000dbb Parts

I ordered both the Grille Assembly and two Grille Clips because it wasn't clear that the clips came with the assembly; they do. I was glad that I did because one of the clips on the assembly was defective, so I had a back up. NOTE: save your old screws; they are NOT included. Installation is relatively simple. It is important that you get the side edges snapped into position before screwing the assembly into place. This may require another person. You most likely will need a small step stool... Read more

Ordered part, received it, installed it. Read more

The top screw is easy to get at after the door yoke is removed. The lower is behind the plate that holds the glass and door together. I removed the door very simple just lift up in the full open position .lay the door on a towel and drill a 1/4 inch hole over the head of the screw and you now can remove the screw with out disassembling the door. Something the factory should have done! Also if your door is sagging it will put stress on the handle. use a adjustable wrench and twist the hinges to... Read more

I replaced the parts with the help of a video provided by Appliance Parts Pros! There was enough detail that I was able to figure out what to do for my model of Advantium and the replacement went very well! It's like having a new appliance! Read more

I got on line to find the handle and got connected to Appliance Parts Pros.com. And they are the pros, they had simple step by step instructions about taking the door apart to get the old handle off and how to get the new handle installed. After I ordered the handle it arrived, unbelievably, the VERY NEXT DAY!!! Appliance Parts Pros have set the standard about customer service. I have never got such great service. Read more

Watching some helpful do-it-yourself hints on Vidoes. Had to disasemble the door, because the screws for fastening the handle where hidden behind the inner part of the door. Videos did not show the step of unscrewing 6 tiny gold colored screws that held the door assembly together. Then used a screwdriver to pop off the plastic door cover with the window. The handle was easily and securely fastened into the plastic door cover. Just as a precaution, I disconnected the electric cord. ... Read more

My husband was able to take the door apart and install the handle once we received it. Read more

Suspected Magnetron failure so I ordered replacement. Unplugged unit and let it sit for a couple of days. Removed it from the wall/range top mounting Removed cover. Unplugged terminals to capacitor; one at a time; carefully kept leads away from each other There were (4) main screws holding the magnetron in position; removed those. Removed the thermal sensor that was attached to the magnetron housing Re-attached the thermal sensor to new magnetron housing Re-attached the new... Read more

14 year old GE Profile microwave wouldn't heat, but had power. Read reviews here. Ordered triumvirate of magnetron, capacitor, & diode. Was hoping not to need the capacitor as this was an expensive part; and if not needed to return to AppliancePartsPros, which has been SOP. After watching a couple YouTube videos of microwave capacitors being shorted, I made a capacitor discharge tool ordering 24W 100K Ohm resistor and high voltage test wires w/ alligator clips from amazon. At the same time,... Read more