She3ar56uc/12Fd9307735 Parts

The Drain Hose is an OEM component for Bosch dishwashers. It is a flexible plastic tube responsible for removing used wash water from the dishwasher sump to household drain plumbing located outside the appliance.

Causes of a bad drain hose include cracks developing along joints from constant bending during drainage or mineral buildup restricting water flow over time.

Symptoms of a bad drain hose involve:

• Water failing to completely drain from the bottom tub area
• Puddles or residual standing water remaining after cycles
• Drainage that is slower than usual or takes multiple attempts
• Mineral deposits left inside the hose obstructing its bore

This OEM Bosch part can also be used on Thermador and Gaggenau appliances.

The Hinge Bushing is an OEM component for Bosch dishwasher models. This bushing acts as a guide and support component for the dishwasher door hinge assembly. It facilitates smooth and quiet opening and closing of the door.

Symptoms of a bad hinge bushing include:

• noise or squeaking coming from the door hinges 
• excess play or looseness feeling in the hinge movement
• difficulty fully closing or opening the dishwasher door

Causes of a bad hinge bushing can be normal wear and tear over the life of the appliance. Small metal particles embedded in the bushing material during manufacturing may also cause premature wear.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Pump to Heater Hose Clamp is an OEM part for Bosch dishwashers. This clamp secures the hose that connects the pump to the heater, ensuring a tight and leak-free connection. It plays a crucial role in maintaining the integrity of the water flow within the dishwasher, preventing leaks and ensuring efficient operation.

Causes of a bad hose clamp can include wear and tear over time, loosening due to vibrations, or damage from repeated tightening and loosening. A faulty clamp can lead to water leaks, which can cause further damage to the dishwasher.

Symptoms of a bad pump to heater hose clamp include:

• Water leaking from the hose connection points
• Reduced water pressure within the dishwasher
• Visible wear, rust, or damage on the clamp
• The clamp not holding the hose securely in place

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Screw Kit (Inner Door) is an OEM part for Bosch dishwashers. It is a comprehensive kit that includes 6 screws required for securing and maintaining the inner door assembly of the dishwasher.

Symptoms of needing a new screw kit:

• Loose or rattling inner door panels
• Inner door components becoming misaligned or detached
• Water leaks or vapor escaping from the inner door area
• Difficulty in opening or closing the dishwasher door smoothly

Causes of a bad screw kit can include missing or stripped screws, corrosion or wear over time, or damage during repair or maintenance work.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwasher models.

The Door Seal is an OEM part for Bosch dishwashers. This crucial component creates an airtight seal around the dishwasher door, preventing water leaks and ensuring efficient operation during the wash cycles.

Symptoms of a faulty door seal:

• Water leaking from around the dishwasher door
• Difficulty in closing or latching the dishwasher door properly
• Visible wear, cracks, or damage to the seal material

Causes of a bad door seal include general wear and tear over time, exposure to high temperatures or harsh detergents, or physical damage from improper handling or installation.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwasher models. 

The 4 x 16 Screw is an OEM component for Bosch dishwashers. 

Common causes of faulty screws include standard wear from years of housing vibrations during wash cycles. Mineral deposits lingering around screw heads also risk eventual corrosion and seizing issues.

Symptoms of potentially loose or damaged screws comprise:

• Odd knocking or buzzing noises from inside cabinets
• Detached or misaligned door panels 
• Water leaks developing between internal seams
• Components unable to be fully secured down during repairs

This screw type is additionally suited for Thermador, Gaggenau as well as some premium Kenmore dishwashers.

The Middle Spray Arm is an OEM replacement part for Bosch dishwashers. It is a rotating component located in the lower dishwasher rack that assists in evenly distributing water across dishes during the wash cycle. 

Symptoms of a bad spray arm include:

• Incomplete cleaning of dishes, even after multiple cycles  
• Soap scum or food soils remaining in hard-to-reach areas
• Dishes coming out either spotty or dry in areas not rinsed properly

Causes of spray arm failure can be worn out or damaged arm brackets preventing proper rotation, cracks in the arm itself inhibiting water coverage, or mineral buildup inhibiting 360-degree rotation. 

This OEM Bosch replacement part is also compatible with some Thermador, Gaggenau, and Kenmore dishwashers.

The Turbidity Sensor is an OEM part for Bosch dishwashers. It is a component located inside the dishwasher that plays a key role in monitoring water quality during each wash cycle. The turbidity sensor detects small food particles and residue in the water, relaying this information to adjust water temperatures, spray pressures, and cycle times accordingly to achieve optimal cleaning results.

Causes of failure could be normal wear and tear over time, mineral buildup affecting the sensor's ability to read water quality accurately, or damage from electrical faults.

Symptoms of a bad turbidity sensor include:

• Inconsistent or inadequate cleaning performance
• Extended cycle times
• Error codes displayed related to water issues

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Base Panel is an OEM part for Bosch dishwashers. It serves as a protective cover for the bottom of the dishwasher, shielding internal components from debris, moisture, and damage while also contributing to the appliance's structural stability.

Causes of a bad base panel can include physical damage from impacts, corrosion due to prolonged exposure to moisture, or general wear and tear over time. A compromised base panel can lead to further issues by allowing dirt and water to infiltrate sensitive components.

Symptoms of a bad Base Panel include:

• Visible cracks or holes in the panel
• Water leaking from the bottom of the dishwasher
• Increased noise during operation
• Loose or misaligned panel

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Side Trim Strip is an OEM replacement part for Bosch dishwashers. It serves as an aesthetic finishing piece that lines both sides of the dishwasher interior tub.

Causes of failure include normal wear from daily use, minor impacts during loading/unloading, and breakdown of plastic material over extended years.

Symptoms of a worn side trim strip can include:

• Cracks, peeling, or discoloration of the plastic trim material over time
• Gaps exposing the tub wall where the strip should cleanly cover
• Loose mounting allowing the trim to detach from its mounting points

This OEM Bosch part is also compatible with Thermador, Gaggenau and some Kenmore dishwashers.

The Screw is an OEM part for Bosch appliances. This screw is designed for securing various components within Bosch appliances, ensuring that parts stay firmly in place during operation.  

Causes of needing replacement screws can include routine maintenance, repairs, or parts becoming loose over time due to vibrations or mechanical stress.  

Symptoms that you might need replacement screws include:

• Loose or wobbly components
• Missing screws
• Difficulty in maintaining the assembly of parts
• Visible wear or damage on the screws

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Pump and Motor Assembly is an OEM part for Bosch dishwashers. This assembly includes both the circulation pump and motor, which work together to move water through the dishwasher during the cleaning cycle.

Causes of a bad pump and motor assembly can include wear and tear from regular use, debris or foreign objects obstructing the pump, or electrical issues that affect the motor's performance.

Symptoms of a bad pump and motor assembly include:

• The dishwasher not cleaning dishes effectively
• Water not circulating properly during the wash cycle
• Unusual noises coming from the dishwasher
• The dishwasher not draining or having standing water at the bottom

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The On/Off Switch is an OEM part for Bosch dishwashers. It is responsible for controlling the power to the dishwasher, allowing the user to turn the appliance on and off as needed.

Causes of a bad On/Off switch can include electrical malfunctions due to worn-out contacts, damage from moisture exposure, or general wear and tear over time.  

Symptoms of a bad On/Off switch include:

• Dishwasher not turning on
• Inconsistent power to the dishwasher
• Difficulty in turning the dishwasher off
• The switch feeling loose or unresponsive

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This upper dishrack rail repair kit restores a secure, smooth glide for the upper rack by fixing loose or damaged rail mounting points on the dishwasher's tub sidewalls. Use it to bring back proper tracking and level support for the upper rack. What it does:

• Repairs damaged or detached upper rack rail mounts
• Secures the rails to keep the upper rack level and aligned
• Restores smooth sliding action of the upper rack
• Common symptoms: upper rack is hard to slide, tilts or drops on one side, or pops off the track

• One upper dishrack rail repair kit

• Disconnect power at the breaker and shut off the water supply before servicing
• Remove the upper rack to access the rail mounting points
• Use a suitable screwdriver/driver to install the repair kit at the rail mounts; do not overtighten
• Verify both rails are level and the rack moves freely before restoring power

The Float Switch is an OEM part for Bosch dishwashers. This part monitors the water level inside the dishwasher. It helps prevent overflows by detecting when the water level gets too high and signaling the control board to stop filling and start draining the water.

Causes of a bad float switch can include wear and tear from regular use, buildup of debris or mineral deposits, or electrical malfunctions.  

Symptoms of a bad float switch include:

• The dishwasher not filling with water
• Water overflowing from the dishwasher
• The dishwasher not advancing through the cycles
• Error codes related to water level issues

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Screw is an OEM part for Bosch dishwashers. It serves as a fastening component, securing the kickplate panel at the bottom of the dishwasher in place.

Causes of needing a replacement screw may include screws becoming stripped or damaged during installation or removal, corrosion or rust buildup on the screws over time, and screws going missing or getting lost during dishwasher maintenance.

Symptoms of an issue with the Screws include:

• A loose or rattling kickplate panel
• Difficulty properly aligning or securing the kickplate
• Visible gaps or an uneven fit of the kickplate

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.