Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Leveling Foot is an OEM part for Bosch dishwashers. It is designed to provide stability by allowing you to adjust the height of the dishwasher, ensuring it is level on uneven flooring.
Causes of a bad leveling foot can include wear and tear over time, damage from excessive force or impact, or thread stripping from frequent adjustments.
Symptoms of a bad leveling foot include:
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
The parts were to complete the install. Not a repair really. Although this was my first dishwasher install DIY. and thanks to the very fast and accurate parts delivery I was able to get everything done right the first time. Read more
The Dispenser Gasket is an OEM part for Bosch dishwashers. This gasket forms a seal around the detergent dispenser, ensuring that water and detergent are properly contained within the dispenser until they are released during the wash cycle. It helps prevent leaks and ensures efficient operation of the dishwasher’s detergent system.
Causes of a bad dispenser gasket can include regular wear and tear, exposure to high temperatures, and the use of harsh detergents.
Symptoms of a bad dispenser gasket include:
Replaced dispenser. It was hard to snap into place. You don't need to order separate gasket it comes with it. Read more
This Sump Gasket is an OEM part for Bosch Dishwashers. It seals the dishwasher sump to prevent water leaks during the washing cycle. Continuous exposure to water, detergent, and heat can lead to wear or damage to this component.
What Causes a Bad Sump Gasket: Exposure to hot water, chemicals in detergents, and constant water pressure can cause the sump gasket to deteriorate or develop tears.
Symptoms of a Bad Sump Gasket:
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
I replaced the gaskets with products from this site which I would not have been able to do without the video on this site. Hard job. The leak was still there though, so I have some hints with this kind of washer. 1) There is a float switch on the base that turns on the drain pump when there is a leak, that is why the drain pump runs constantly, it prevents catastrophic flooding in many cases. The float consists of a little styrofoam donut that lifts an arm, all white. The arm is connected to a... Read more
The Terminal Box is an OEM part for Bosch dishwashers. It serves as the central hub for connecting electrical wires within the appliance, ensuring a safe and organized electrical system.
Over time, the terminal box can become damaged due to electrical malfunctions, corrosion, or physical impact. Wear and tear from regular use can also affect its integrity, leading to potential electrical issues.
Symptoms of a bad terminal box include:
Purchased new replacement parts. The video was helpful. Thank you! Read more
The On/Off Button is an OEM part for Bosch dishwashers. As a primary control interface, this button facilitates the activation and deactivation of the dishwasher's functions. Its ergonomic design and precise construction ensure ease of use and reliable operation.
A common issue with a malfunctioning On/Off Button involves wear and tear, leading to a loss of responsiveness or failure to engage/disengage the dishwasher's functions.
Symptoms of a defective On/Off Button may include:
The old fascia had broken and been torn off. I should have saved the buttons from it, but I didn't know that I'd be repairing it - I figured I would have to replace the unit. Well, money is tight, so I got the model number from the unit and looked up parts online. I couldn't find the exact model number on this site, but the picture of the fascia looked just like the picture in my manual, so I bought it, a handle strip, and a new set of buttons. I pulled the stainless panel off the front, then... Read more
Hose, with o - ring, shu (uc/12 & above)
This Sump to Float Hose is an OEM part for Bosch Dishwashers. It functions to carry water from the dishwasher sump to the float assembly. Continuous water flow and exposure to detergents can lead to wear or damage over time.
What Causes a Bad Sump to Float Hose: Exposure to chemicals and hot water, along with wear from water flow, can cause the hose to degrade or develop cracks.
Symptoms of a Bad Sump to Float Hose:
Used vids on youtube for steps on how to disassemble and install the pump; search "Bosch dishwasher circulation pump replacement". Also on AppliancePartsPro forums, a poster put up the Bosch "Dishwasher Service Training Manual" in .pdf. Search "Bosch dishwasher low pressure" on the forum. It's one of the post with the longest thread. Six pointers. 1. In another forum post, the poster noted that some hoses were brittle with age - and cracked when reinstalling. I had same issue (my washer is... Read more
Finish the sides of your dishwasher cutout. These white side trim strips cover the left and right edges for a clean, factory look and help replace cracked, yellowed, or missing trims that leave gaps beside the appliance.
The Hinge Lever (RH) is an OEM component specifically designed for Bosch dishwashers. This right-hand lever is a part of the dishwasher door hinge assembly, working to open and close the door during each use. Causes of a bad hinge lever can include wear and fatigue over thousands of opening and closing cycles. Damage can also potentially occur from any impact or denting of the door surface near the lever mechanism. Symptoms of an ineffective hinge lever include:
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers.
Ordered the full hinge piece and an extra bushing. Was able just to slide the dishwasher forward a bit, lift the right side hinge off its seat and pop in the new bushing without disassembling. Fixed! I am retaining the full hinge piece in case of any future door incident but suspect I will never need it Read more
This is a button. This is a genuine OEM part made by Bosch and has been sourced directly from the manufacturer. This part is intended to replace a broken or defective button on certain different makes and models of dishwashers.This button attaches to the front panel of the dishwasher and is needed for powering on and off the dishwasher. Over time and with regular use, buttons can become worn or broken and stop working. This part requires proper tools for replacement. Before starting, disconnect the dishwasher completely from both power and water hookups. Please follow appropriate safety precautions when attempting to repair any appliances. For more accurate information on how and where to install this button, the appropriate owner's manual and included diagrams should be referred to.As an authentic replacement part, this button is suitable for use on several different models of dishwashers manufactured by Bosch, Thermador, and Gaggenau. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.
The parts from AppliancePartsPros.com arrived a day ahead of schedule. (I'm a big APP.com fan.) I removed the metal front door panel, then removed the broken plastic Panel-Facia which houses the handle. Because the buttons and handle trim needed to be transferred from the old Panel-Facia to the new one, I expected that, also being plastic, they may break when making the transfer, so I ordered all of those parts as well, which only drove the cost up about $32. If I broke one item in the... Read more
The Sealing is an OEM replacement part for Bosch brand dishwashers. Located on the perimeter of the small rinse aid compartment door, this resilient rubber piece forms an essential water-tight seal when the dispenser is closed.
Symptoms of a potentially problematic rinse aid door sealing include:
Causes of a faulty rinse aid door sealing can be repetitive opening/closing stress breaking down pliability long-term. Exposure to chemical vapors from the rinse aid may also degrade sealing properties.
Ordered new door and seal. They arrived in just a few days. Watched the video on this site. Snapped out the old door and snapped in the new door in about 15 seconds Read more
This push button set replaces the plastic buttons on the control panel, restoring clean looks and reliable, consistent presses so you can select settings and operate the unit without dealing with sticky, cracked, or missing buttons. What it does:
I ordered a new Panel/Facia and bought replacement buttons just to be safe. All were pretty easy, but two things to BE CAREFUL about that are important. First, watch the videos about how to remove and replace the facia panel because if you do it improperly you will easily break the plastic tabs and be screwed. Secondly, The five-button MUST BE INSTALLED IN THE RIGHT ORDER. They are different from each other and the DW will not work if you don't notice that, they have letters that are... Read more
The Hinge Lever (LH) is an OEM part for Bosch dishwashers. This left-hand lever is responsible for assisting in the opening and closing of the dishwasher door through a pivoting motion. The hinge lever works with other door components like springs and cables to provide smooth, balanced movement of the door.
Symptoms of a bad Hinge Lever include:
Causes of a bad Hinge Lever can include normal wear and tear over time, damage from excessive force or weight on the door, or loose mounting hardware.
Note: Left hinge lever
Replacement of hinges and door seal. Read more
NTC (negative temperature coefficient). Resistance or capacitance decreases when temperature increases.
The Temperature Sensor with Hi Limit Thermistor is an OEM part for Bosch dishwashers. This sensor monitors internal temperatures, providing feedback to the control module during each cycle.
Causes of failure can be related to mineral buildup over time interfering with sensing or physical damage to wiring or connectors.
Symptoms of a bad temperature sensor include:
Ordered new heater/thermostat piece. Read more
The Panel Facia is an OEM part for Bosch dishwashers. It is responsible for covering the front interior panel and electrical components of the dishwasher. The panel facia plays an important protective and aesthetic role.
Causes of a bad panel facia can include damage from harsh cleaning chemicals, cracks or breaks from impact, or signs of normal wear and tear over time.
Symptoms of a bad panel facia include:
Removed 10 Star Screws to get the door cover off and the fascia panel snapped off. Inserted the 6 buttons and the door handle into the facia panel prior to snapping it in place. Screwed the door cover back in place and the job was done. The facia has two tabs that need to be inserted into the door. Be careful not to crack them as they seem fragile. The first facia panel I ordered arrived with with one of those tabs cracked off. Read more
The Junction Box Cover is an OEM part for Bosch dishwashers. Located at the rear of the appliance, the junction box houses connections to the power supply and control board wiring. The junction box cover protects these internal electronic parts.
Symptoms of a bad junction box cover can include:
Ordered parts and put them on. Read more
2 clamps included.
ORDERED TUBE AND CLAMPS Read more