Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Turbidity Sensor is an OEM part for Bosch dishwashers. It is a component located inside the dishwasher that plays a key role in monitoring water quality during each wash cycle. The turbidity sensor detects small food particles and residue in the water, relaying this information to adjust water temperatures, spray pressures, and cycle times accordingly to achieve optimal cleaning results. Causes of failure could be normal wear and tear over time, mineral buildup affecting the sensor's ability to read water quality accurately, or damage from electrical faults. Symptoms of a bad turbidity sensor include:
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
Ordered and replaced sump pump, backflow preventer valve and turbidity sensor on Bosch dishwasher. The latter two parts were recommended when ordering the sump pump and did need replacing. The videos showing how to remove and replace each part are great. The project went well and the dishwasher is fixed for less than 1/4 of what it would cost to get a repairman out here. In all fairness we do live in a remote location and do not have any local appliance repairmen. This is the third project I... Read more
Replacement power cord for dishwashers. Connects appliance to wall outlet. Replace if cord is cracked, damaged, burned, or missing from unit.
A part was missing from a dishwasher purchased from a company that was going out of business. When the electrician tried to install it, he found that it was missing a critical, proprietary part that connected the power to the unit. The part did not appear on any diagrams provided with the machine. I contacted Appliance Parts Pros. They found an obscure diagram that showed the part, identified the part, and tracked it down for me. The part was priced reasonably and shipped quickly. Highly... Read more
Upper rack tine insert for dishwashers. Supports delicate dishes and glassware in the top rack. Replace if cracked, broken, or missing to prevent damage.
I clipped in the new part that was ordered. Read more
The Cover is an OEM part for Bosch dishwashers. It provides a protective barrier that shields internal components from damage and extends the life of the appliance. The cover is exposed to heat, humidity, and debris during each wash cycle. Over time and repeated use, these conditions can cause cracks, warping or breakdown of the protective plastic material. Causes of a bad cover include normal wear and tear, accidental dents or punctures, and exposure to excess heat or chemicals. Symptoms of a cover needing replacement include:
I ordered and replaced strategic parts for the dishwasher through your company. The correct parts arrived very quickly and we had much cleaner dishes the next day. Read more
Dishwasher not filling with water or leaking? The aquastop valve prevents floods by shutting off water supply. Moderate DIY repair in 30-60 minutes.
Replacement part from AppliancePartsPros.com worked great. Had to remove the left side panel to access the hose clamp, but otherwise fairly easy, Thanks Read more
Seals the sides and top of your dishwasher tub to prevent leaks and contain steam. Replace when worn or cracked to restore watertight operation.
Web site helped me diagnose problem as water inlet valve not fully shutting off. Repairman quoted me 200.00 to fix, so I decided to gamble the price of the item and repair myself. Web site offered easy to follow, detailed video instructions, had the part replaced and back to working like new in less than 30 minutes. Read more
The Sealing is an OEM part for Bosch dishwashers. It serves as a protective barrier between the control panel and the internal components of the dishwasher, preventing moisture and dust from entering and causing damage.
A bad sealing can occur due to wear and tear, exposure to moisture, or accidental damage. Signs of a faulty sealing include water seeping into the control panel, visible cracks or gaps, or a loose fit.
Symptoms of a bad sealing include:
Replace your damaged or worn-out sealing with this genuine OEM Bosch part to restore your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
I replaced the controller, the thin seal @ the top and the cable in the door and has seemed to resolve the issue. I removed the three screws that were in the upper part of the door handle slot and took out the inner panel screws on the door. No need to take the screws for the hinges out. The door will spring shut once you take the inner panel off so be careful. You'll need a Torx screwdriver Read more
Replacement crockery basket for your dishwasher. Holds plates, cups, and saucers at adjustable levels. Replaces cracked, broken, or damaged baskets.
The Heat Pump is an OEM part for Bosch dishwashers. This pump works to circulate air within the dishwasher during the drying cycle, helping to remove moisture from washed dishes. Causes of a bad heat pump can include a malfunctioning heating element that fails to produce warm air, broken or misaligned fan blades that don't circulate air properly, or worn out motor that no longer operates effectively. Symptoms of a bad heat pump include:
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
I changed the heater / pump. Read more
Channels wastewater from your dishwasher to the household drain. Replace if brittle, cracked, clogged, or leaking to restore proper drainage.
Door pulley rope for dishwasher door latch mechanism. Replace if frayed, broken, or snapped from repeated use. Includes rope and plastic retainer.
I ordered the part - plastic rope holder and cord and replaced the broken one. Read more
Seals the sump area to prevent leaks and ensure proper water circulation and drainage. Replace if cracked, warped, or missing. Verify fit with your model.
I searched for the problem online and found the video. It was direct and straightforward, so I just bought the parts without shopping elsewhere. . I replaced the Lid and Cover (which was missing) in the drain assembly and it’s back to normal Read more
Detergent releasing too early or leaking from the dispenser? This seal creates a watertight barrier to prevent premature dissolution. Easy 10-minute fix.
Dishwasher door seal creates a watertight barrier around the tub opening. Replace if you notice leaks, moisture escaping, or visible cracks. Confirm fit with your model number.
This replacement screw secures panels, brackets, and internal parts in your appliance for a tight, rattle-free fit. Use it to replace lost, stripped, or corroded hardware and keep components properly fastened.
I had removed the frame some time ago to deal with a different issue. It turns out there are two types of screws. Apparently, when I replaced the screws, I did so randomly, and some did not quite fit the holes, and fell out and were lost over time. There are longer screws, 022 on your diagram, that fit the UPPER three holes in the dishwasher door frame. The shorter screws, 023 on your diagram, fit the lower three holes on the dishwasher door frame. The screw heads are the same, but the... Read more
The Holder is an OEM component specifically designed for Bosch dishwashers. It secures serveware and accessories safely inside the tub during wash cycles. Flexible yet durable prongs provide adjustable containment for maximum loading efficiency.
Causes of a bad holder can include normal wear and tear until prongs warp or weaken, inhibiting proper holding. Damage from loading large pots may also cause replacement needs.
Symptoms of a bad holder include:
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers. Replace yours to optimize organization and minimize breakage during every wash.
The top and middle racks had broken rollers. Tracks were intact. Went to the website with the Model number. Pulled up drawings. Turns out the rollers are part of assemblies; for the middle rack "Rail-Pull out" left and right (mirror images of each other). Top: "Holder", which is a set of two. Top rack: the Holders just snap on with built-in clips. Easy. about 2 minutes per side. The Middle rack is a little more complicated. There's a spring-loaded clip that you push on, slide the rail... Read more