Shx7er55uc Parts

The Spring is an OEM part for Bosch dishwashers. It is used in the door mechanism to provide tension and balance, ensuring the door opens and closes smoothly and stays securely in place during operation.

Over time, the spring can wear out or become damaged due to repeated use, exposure to moisture, or accidental impacts. If the spring fails, the door may not operate correctly.

Symptoms of a bad spring include:

• The door not staying open or closed
• Difficulty in opening or closing the door
• The door dropping too quickly or not staying in position
• Unusual noises when operating the door

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Note: One spring only. For the spring/cable kit, order 00754866

The Door Lock Assembly is an OEM part for Bosch dishwashers. It plays a crucial role in ensuring the dishwasher door is securely locked during the wash cycle, preventing leaks and potential safety hazards.

Symptoms of a bad door lock assembly include:

• Dishwasher not starting or operating with the door closed
• Door appearing closed but not locking properly
• Leaks or water seeping out from the door area during cycles
• Error codes related to the door lock mechanism

Causes of a faulty door lock assembly can include mechanical wear and tear over time, damage to the locking components, or issues with the electronic controls that regulate the locking mechanism. 

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwasher models.

The Turbidity Sensor is an OEM part for Bosch dishwashers. It is a component located inside the dishwasher that plays a key role in monitoring water quality during each wash cycle. The turbidity sensor detects small food particles and residue in the water, relaying this information to adjust water temperatures, spray pressures, and cycle times accordingly to achieve optimal cleaning results.

Causes of failure could be normal wear and tear over time, mineral buildup affecting the sensor's ability to read water quality accurately, or damage from electrical faults.

Symptoms of a bad turbidity sensor include:

• Inconsistent or inadequate cleaning performance
• Extended cycle times
• Error codes displayed related to water issues

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Power Cord is an OEM replacement part for Bosch dishwashers. It supplies electrical current that allows the dishwasher to properly perform cycles. Located at the rear of the appliance, it plugs into a standard three-prong outlet.

Causes for power cord replacement include cracking, splitting, or breaks in the protective insulation over time from repeated bending and stress.

Symptoms of a faulty power cord include:

• Unresponsive or failed cycles indicating no power to operate
• Melted, blackened, or charred areas along the cord housing
• Visible frayed wires or exposed copper filaments

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Cover is an OEM part for Bosch dishwashers. It provides a protective barrier that shields internal components from damage and extends the life of the appliance.

The cover is exposed to heat, humidity, and debris during each wash cycle. Over time and repeated use, these conditions can cause cracks, warping or breakdown of the protective plastic material.

Causes of a bad cover include normal wear and tear, accidental dents or punctures, and exposure to excess heat or chemicals.

Symptoms of a cover needing replacement include:

• Visible cracks or holes that compromise the barrier
• Loose or sagging fit that allows internals to be exposed
• Warping or melting of the protective plastic shield

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Pump and Motor Assembly is an OEM part for Bosch dishwashers. This assembly includes both the circulation pump and motor, which work together to move water through the dishwasher during the cleaning cycle.

Causes of a bad pump and motor assembly can include wear and tear from regular use, debris or foreign objects obstructing the pump, or electrical issues that affect the motor's performance.

Symptoms of a bad pump and motor assembly include:

• The dishwasher not cleaning dishes effectively
• Water not circulating properly during the wash cycle
• Unusual noises coming from the dishwasher
• The dishwasher not draining or having standing water at the bottom

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This dishwasher door gasket seals the sides and top of the tub opening to keep water and steam contained during a cycle. Replacing a worn seal helps stop leaks at the door edges and restores quiet, efficient operation.

• Forms a watertight seal between the door and the tub perimeter
• Helps prevent dripping or puddles at the front corners and along the sides
• Maintains proper wash pressure, temperature, and noise isolation
• Replace if torn, flattened, brittle, or if moisture escapes around the door

• Disconnect power; if uninstalling the dishwasher, also shut off the water supply
• Open the door and pull the old gasket straight out of the channel
• Clean the groove; warming the new gasket in hot water can help relax bends
• Start at the top center and press the gasket fully into the channel without stretching; close the door to seat the seal and run a test cycle to check for leaks

The Cutlery Drawer Roller Assembly is an OEM part for Bosch dishwashers. This assembly includes the rollers that allow the cutlery drawer to glide smoothly in and out of the dishwasher, ensuring easy access to utensils and efficient loading and unloading. The roller assembly supports the drawer's weight and provides stability during operation.

Causes of a bad roller assembly can include wear and tear from repeated use, accumulation of debris, or physical damage to the rollers or tracks.

Symptoms of a bad cutlery drawer roller assembly include:

• Difficulty in sliding the cutlery drawer in or out
• Unusual noises when moving the drawer
• Drawer becoming misaligned or stuck
• Visible damage or wear on the rollers

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Aquastop is an OEM part for Bosch dishwashers. This part prevents water leaks and flooding by automatically shutting off the water supply in case of a leak or malfunction.  

Causes of a bad Aquastop can range from normal wear and tear over time to physical damage or clogging due to debris or sediment buildup in the water supply line.

Symptoms of a bad Aquastop include:

• Water leaks or puddles around the dishwasher
• Failure of the dishwasher to fill with water
• Error codes or indicators related to water supply issues
• Visible damage or deterioration of the Aquastop component

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Door Handle is an OEM part for Bosch dishwashers. It is installed on the outer edge of the dishwasher door and is used to open and close the door.

The door handle is responsible for providing an easy and secure grip point to facilitate loading and unloading of dishes. It allows for controlled movement of the door through its range of motion.

Symptoms of a bad door handle can include:

• Looseness, wobbling, or detachment from the door
• Chipping, cracking or general wear and tear of the handle surface
• Difficulty grasping or lifting the door with the handle
• The door failing to securely latch in the closed position

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This drain hose channels wastewater from your dishwasher to the household drain. Replacing a brittle, cracked, or clogged hose restores proper draining and helps prevent under-sink leaks and water backup. What it does:

• Provides a sealed path for wastewater from the dishwasher's drain outlet to the home's drain system
• Common failure signs include slow or no draining, water left in the tub, or water backing up
• Drips or leaks at hose joints, behind the unit, or under the sink
• Visible kinks, cracks, or deterioration; possible blockage leading to odors or strain on the drain pump

• 1 drain hose

• Disconnect power at the breaker and shut off the water supply; pull the dishwasher forward for access
• Place a towel or pan to catch residual water when removing the old hose
• Reuse existing fittings/clamps; route the new hose with a proper high loop/air gap as required, avoiding sharp bends and kinks
• Run a drain/rinse cycle and inspect all connections for leaks

The Lower Dishrack is an OEM part for Bosch dishwashers. It provides the necessary rack space for washing dishes beneath the upper rack level.

As Bosch's signature FlexSpace design, it folds up for easy loading but must withstand heavy loads regularly. Causes of damage can include impact or misalignment bending the rack over time.

Symptoms of a problematic lower dishrack include:

• Difficulty folding/unfolding the bottom rack
• Loose fitment allowing rattling during the cycle
• Reduced rack space for full loads
• Cracks or breaks compromising integrity

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Cover is an OEM part for Bosch dishwashers. Designed to securely seal the sump area, this part prevents leaks and ensures that water is properly circulated and drained during the dishwashing cycle. 

Causes of failure might include physical damage such as cracks or warping, which can compromise the seal, or the buildup of debris that prevents proper seating of the cover. 

Symptoms of a failing Cover include:

• Water leaks from the bottom of the dishwasher
• Poor washing performance due to inadequate water circulation
• Unusual noises as the pump struggles to draw or expel water
• Visible damage or warping of the cover itself

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Wire Harness is an OEM component specifically designed for select Bosch dishwashers requiring electrical connections between moving components. It facilitates signal and current pathways throughout appliance frames.

Reinforced flexing sections bend without kinks accommodating shifting door movements. While connector joints remain snug against jostling. This daisy chain design simplifies diagnostics and maintenance procedures compared to individual wiring. 

Symptoms signaling the need for a new harness include:

• Intermittent cycle malfunctions indicating loose or corroded connections  
• Broken or cracked housing exposing live conductors to shorting hazards
• Overly taut sections hindering the intended range of component motions

Causes relate to prolonged abrasion stresses and water damage compromising insulation throughout thousands of cycles. Physical damage during repairs may require a complete replacement of this integral wiring backbone.

This OEM Bosch replacement harness is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers relying on consistent control schemes. Reinstallation restores reliable electrical pathways.
 

The Crockery Basket is an OEM replacement part designed specifically for Bosch dishwashers. It provides adjustable levels for washing different sized items like plates, cups, and saucers. Causes of a bad crockery basket include damage over time from heavy use or impact. 

Symptoms of a bad crockery basket include:

• broken or cracked racks
• difficulty keeping dishes properly spaced during the wash cycle
• racks that no longer latch securely into place 

This genuine OEM Bosch crockery basket ensures your dishes are washed efficiently and gently. This Bosch part can also be used on Thermador and Gaggenau appliances.

This dishwasher spray arm distributes pressurized wash water through rotating jets to cover dishes evenly. Replacing a cracked or clogged arm restores proper spray pattern and helps improve cleaning performance across the racks.

• Channels water from the circulation pump through multiple nozzles for effective cleaning
• Rotates to deliver even coverage throughout the tub
• Wear, cracks, or mineral buildup can restrict flow or stop rotation
• Typical symptoms: poor cleaning results, spray arm not spinning, uneven spray patterns, or visible damage

• Disconnect power at the breaker and shut off water supply
• Remove the rack if needed; release the arm by pressing its tab or twisting the hub (design varies)
• Clear debris from the jets and check the mounting hub/seal before installation
• Install until fully seated and spinning freely; run a test cycle to operation