Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The front wheel assembly replacement (WRXO2X12454) was straightforward and easy to do. Took maybe 30 minutes start to finish. The rear wheel assembly (wheel WRO2X10695 and axle WRO1X10604) that was more involved as the original wheel axle is actually a rivet that you have to cut out. 1. I used a vibrating multitool with a carbide blade to cut the axle out. Had to use a pair of vise grips to hold the rivet to keep it from spinning while cutting it. 2. The new axle I drilled a 2mm hole thru the... Read more
The Drive Cup is an OEM part for GE refrigerators. This part engages with other parts to drive the ice out of the molds and into the storage bin.
Causes of Drive Cup failure can range from physical wear and tear from regular use, which may lead to cracks or deformities in the part, to accumulation of frost or ice that hinders its movement.
Symptoms of a malfunctioning Drive Cup include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Ordered new auger and installed it and now we have clean ice for our drinks. Read more
This is a end cap for the left side of the shelf.
I replaced it with a new one Read more
The Ice Door Spring is an OEM part compatible with GE refrigerators. It is responsible for providing tension and support to the ice chute door, allowing it to open and close smoothly. When you activate the ice dispenser, the spring helps to release the door and allow the ice to pass through. After dispensing, the spring assists in closing the door to prevent cold air leakage and maintain the desired temperature inside the refrigerator.
You should replace the ice door spring if it loses tension or breaks, which can happen due to regular wear and tear, frequent use, or accidental damage. A faulty spring can lead to issues with the ice dispenser's operation and overall efficiency.
Symptoms of a bad ice door spring may include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
The ice dispenser door was not closing tightly. As a result, there was frost build up in the ice chute, which also was allowing ambient air and temperature into the freezer compartment. Upon further inspection, there was black “schmutz” on the ice door, and the rubber ice funnel and deflector parts were deteriorating. Because the door was not closing tightly, I also assumed that the door-closing spring was week. The parts I ordered were: ice door assembly, ice funnel, ice deflector, spring and... Read more
This is a end cap for the right side of the shelf.
It was a challenge...the shelf unit consists of two plastic end brackets and a long metal shelf. I possessed one original end cap while the metal shelf was inadvertently discarded years ago along with the other broken end bracket. For a few years some white duct tape was pressed into service as a "temporary" bottom shelf. Anyway, I searched for the necessary parts online and found and ordered a new end cap on AppliancePartsPros.com and a new metal shelf from another online vendor. The new end... Read more
Color: Black.
Was replaced. Read more
Did some research on Appliance Parts Pros site. Took a chance and ordered the parts I thought were needed. They came in three days. Suspicions confirmed. Relatively easy fix. All went well. Repair videos were especially helpful. Appreciate ease of repair and help from App Parts. Thanks Read more
Color: clear. It's 7 watts 130 volts.
After replacing the bulb several times, I ordered and replaced the socket. Easy install and no more light bulbs blowing. The instruction video help immensely. Read more
This is in a 15 year old Built-in Monogram that had the compressor replaced a few years ago. Before discovering the motor failure I replaced the main board since a Refrigeration Contractor I know said that if it wasn't bad it would be soon since those parts typically only last around eight years. The motor replacement is pretty simple; more time is spent getting to the motor and re-assembling everything than actually changing the motor. The trickiest part is getting the fan set correctly on... Read more
Right hand side. For left hand use WR17X2770. For center use WR17X2768
Ordered the part from you using your clear part diagram, arrived two days later and crisper was fixed! Read more
This replacement part is an ice auger blade, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. Ice auger blades are usually found in ice maker assemblies and are used during the ice-making and dispensing process. These blades are what are used when the user is in need of shaved or crushed ice. The mechanism takes full ice cubes and cuts the ice cubes down to create the different types of ice. A new ice auger blade might be needed if the user noticed that the current blades are dull or unable to cut ice. It is possible that the blades become dull over time after many years of use, so replacing them might be a good idea. Be sure the power is completely off before attempting to repair this part.This ice auger blade is sourced directly from the manufacturer and is a genuine OEM replacement part. Note that this part is sold individually.
This was a very easy repair, the on-line video at AppliancePartsPros.com was helpful. The Helix was spinning freely (meaning, the Auger Blade was not holding it in place on the Auger). Pulling the assembly apart was a snap, and very logical (the video is perfect if you get lost). The family is now enjoying both crushed and cubed ice - and the redesign of the Auger Blade seems to prevent clogging in the ice shoot. Read more
I removed the drawers and old rails, and screwed in the new ones. It was very straightforward. Read more
This mounting screw secures various components inside your refrigerator to the cabinet structure. It's designed specifically for refrigerator assembly with the correct thread pitch and corrosion-resistant coating. Replace if components are loose, rattling, or if the original screw is stripped or missing.
I replaced the Evaporator Fan Motor the brackets were rusty so I ordered them. Read more
This twist-lock shelf support bracket secures refrigerator shelves in place by rotating into position. It replaces broken or worn support clips that cause shelves to sag or fall out. Use when your refrigerator shelves won't stay level or keep sliding out of position.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.