Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Wed9050xwi Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Dryer Power Cord (4-Wire)
Genuine Whirlpool part
By: Whirlpool
Part Number: PT220L

4-wire power cord connects your electric dryer to a 4-prong household outlet. Replace a worn, damaged, or overheated cord to restore safe power connection.

Do-It-Yourself Stories from Customers like You The dryer would not heat and prior to that problem it required long periods to dry the clothes   James D. • Highland Springs , VA • November 27, 2019

I previously ordered the heating element, thermostat, and fuse. Also the rear drum rollers. However, after completing that repair I noticed that the terminal block and power cord had some damage from an apparent overheating while allowing the dryer to continue to run in order to dry the clothes. All is well now and the unit is working just fine. I appreciate the quick delivery of all 3 orders. Read more

More
$28.43

IN STOCK
Ships Today Guaranteed
Add to Cart
Dryer Belt Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10411937

Dryer won't start or run? A faulty belt switch often causes this when the belt snaps or slips. This switch monitors belt tension and is a fairly easy fix.

Do-It-Yourself Stories from Customers like You Drum wouldnt turn power to control panel but wouldnt start   Andy S. • Arlington , VA • November 03, 2016

Replaced motor "triple switch" Part Number: AP6021090 and the thermal fuse Read more

More
$28.43

IN STOCK
Ships Today Guaranteed
Add to Cart
Dryer Exhaust Duct Outlet Collar
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3387911

Channels dryer exhaust to external vent connection. Replace if rusted, leaking, or screen is damaged to restore proper airflow and drying performance.

Do-It-Yourself Stories from Customers like You The vent on the air duct assembly had become rusted   Christy R. • Arlington , TX • August 04, 2015

My son and I took the back panel off the dryer and found that the dryer was full of lint. It was very dirty and probably explains why the dryer had no been working as well. We cleaned the dryer out, took off the old air duct assembly and replaced it with the new one. We also replaced the old dryer hose while we had it pulled out. The repair was very easy, simply a matter of unscrewing screws and then reattaching them. Based on how dirty the dryer was it is probably a good idea to check the... Read more

More
$153.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Dryer Light Lens Cover
Genuine Whirlpool part
By: Whirlpool
Part Number: W11226088

Covers and protects your dryer's light bulb from heat and debris while diffusing illumination. Replace if cracked, yellowed, or missing. Confirm fit.

Do-It-Yourself Stories from Customers like You My dryer was missing the light lens within the dryer drum   Ruqaiyah W. • Kansas City , KS • September 12, 2016

Purchased the light lens and screwed it into the dryer drum. Read more

More
$26.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Dryer Door Strike
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8565122

Dryer won't start or door won't stay closed? A worn door strike prevents proper latching. Simple 10-minute fix with just a screwdriver. Video guide included.

Do-It-Yourself Stories from Customers like You Maytag industrial dryer door would not stay closed the plastic striker broke   Viktoriya K. • Salem , MA • September 01, 2014

Took the door down, disassembled the door, replaced the striker, put the door together, attached to the dryer. Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Dryer Door Seal
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10163915

Seals the dryer door perimeter to contain heat and prevent air leaks. Replace if damaged, stretched, or pulled off during cycles. Confirm fit with your model.

Do-It-Yourself Stories from Customers like You Dry door seal pulled off nad stretched   Andrew R. • New York , NY • December 18, 2016

The replacement popped into place in about one minute. Only issue was which side faced out, but i soon realized seal is designed to only match up on one side. Read more

More
$62.61

IN STOCK
Ships Today Guaranteed
Add to Cart
Spring Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8066208

This spring clip secures small panels, brackets, or trim inside your appliance to maintain a snug fit and prevent movement. Replacing a fatigued clip helps restore proper alignment and reduce unwanted vibration or rattling. What it does:

  • Provides spring tension to hold a component firmly in place
  • Helps prevent vibration, rattling, or shifting during operation
  • Replaces a bent, worn, corroded, or missing clip
  • Common symptoms: loose or misaligned panel/trim, recurring rattles, or parts that won't stay secured
What's included:
  • 1 spring clip
Install notes:
  • Disconnect power (and gas, if applicable) before servicing
  • Access the clip location per your model's service/parts diagram
  • Note the clip's orientation and attachment points before removal
  • Use needle-nose pliers carefully to avoid bending adjacent tabs or brackets

Do-It-Yourself Stories from Customers like You Lint filter stuck.   Neal D. • Hixson , TN • July 31, 2019

There's a metal piece that the lint filter pushes down into that got bent a bit I guess and ended up skewering the lint filter. I got it loose but couldn't get the metal piece to stay where it was supposed to be to operate without catching the lint filter. I think it's there to prevent things like socks from hitting the blower wheel. When the new part came in I had to take the front cover off the blower wheel. It was easier than I thought, just three bolts/screws. Don't bother taking off... Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Dryer Lint Duct Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10128606

Lint duct assembly creates a sealed airflow path from drum to blower. Replace if cracked, damaged, or leaking to restore drying efficiency. Verify fit by model.

More
$89.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer (Hardware), 1 Pack
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10121334

This replacement washer is a small hardware component used in appliance assemblies to provide a stable bearing surface and proper spacing. Replacing a worn or missing washer helps maintain alignment, reduce vibration, and protect mating parts from damage.

  • Distributes load under a nut, bolt, pin, or shaft to protect mating surfaces
  • Maintains correct spacing and alignment within stacked components
  • Helps reduce friction, vibration, and noise in moving assemblies
  • Worn or missing washers can contribute to looseness, wobble, rattling, or premature wear
What's included: 1 washer Install notes:
  • Disconnect power and shut off gas/water before servicing
  • Note the original order and orientation of parts during disassembly
  • Inspect fasteners, shafts, and bushings; replace any that show wear or damage
  • Tighten fasteners securely per the service manual; do not overtighten

Do-It-Yourself Stories from Customers like You Skeaking bearings gone in idler pulley   Mark C. • Pulaski , NY • January 08, 2016

Replaced Read more

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: W10850046

This factory fastener secures appliance components such as panels, brackets, and handles. Replacing a missing or damaged screw restores a tight fit, reduces rattles, and helps keep parts aligned for smooth, reliable operation.

  • Secures components to the appliance frame or assemblies
  • Helps maintain alignment and structural stability
  • Replaces missing, rusted, or stripped hardware
  • Common symptoms include loose/wobbly handles or panels, rattling/vibration noises, or a visibly missing screw
What's included: One screw Install notes:
  • Disconnect power before servicing
  • Use the correct driver/bit and start threads by hand to avoid cross-threading
  • Do not overtighten; snug until secure
  • Replace any that are corroded or stripped for an even hold

Do-It-Yourself Stories from Customers like You Broken handle.   Paul P. • Mundelein , IL • December 19, 2022

Replaced the Door Handle. Read more

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Appliance Mounting Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: W10850756

Replacement screw secures panels, brackets, and internal assemblies. Needed when original hardware is stripped, corroded, or missing to keep parts tight.

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: W10853898

The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear panel onto the cabinet frame, ensuring a sturdy connection between housing components.  Proper installation is critical for the washer's structural integrity.

Causes of a bad screw include corrosion from repeated water exposure or stresses from years of use. Loosening can occur from vibrations weakening the threads over time. 

Symptoms of a bad screw include:

  • Rear panel detaching from frame opening gaps
  • Increased noise and vibrations from a compromised seal  
  • Stress on other connections from improper mounting points
  • Potential leak paths from openings near hoses or tub areas

This OEM Whirlpool replacement screw helps maintain a tight panel closure. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8534022

This replacement screw secures panels, brackets, and internal components in your appliance. Replacing a missing or stripped screw restores a tight, rattle-free fit and helps keep parts properly aligned and protected during operation.

  • Fastens appliance panels, brackets, and hardware in the designated locations
  • Replaces missing, stripped, or corroded fasteners
  • Helps reduce vibration noise and looseness from unsecured parts
  • Restores proper fit and alignment after service or reassembly
What's included: 1 screw Install notes:
  • Disconnect power; turn off water supply before servicing
  • Match the screw to the original location and replace one at a time to maintain alignment
  • Use the correct driver; tighten snugly without overtightening to avoid stripping metal or cracking plastics
  • If threads in the mating hole are damaged, repair/replace the clip or insert as specified in the service manual

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Dryer Lint Screen Door
Genuine Whirlpool part
By: Whirlpool
Part Number: W11222846

Dryer lint screen door provides access to the lint filter. Replace if cracked, broken, or won't close properly. Verify fit with your model number.

Do-It-Yourself Stories from Customers like You Broken parts   Joao L. • Albertson , NY • February 16, 2020

Changed the old parts with the new ones. Unscrewed one side. The other side was broken Put the new parts together and screwed back into place Done. Everything works Read more

More
$94.31

IN STOCK
Ships Today Guaranteed
Add to Cart
Dryer Blower Housing
Genuine Whirlpool part
By: Whirlpool
Part Number: W10888146

This is the plastic or metal housing that surrounds the blower wheel inside the dryer, forming the chamber that directs exhaust air from the drum toward the vent outlet. It creates the sealed pathway necessary for proper airflow during drying cycles. Replace this housing if it is cracked, warped, or damaged, which can cause poor drying performance, unusual noises, or lint buildup due to air leaks.

More
$50.57

IN STOCK
Ships Today Guaranteed
Add to Cart
Dryer Heater Box Bracket
Genuine Whirlpool part
By: Whirlpool
Part Number: 8066099

Secures the heater housing to the dryer cabinet. Replace if your bracket is bent, cracked, or missing to restore stable mounting and alignment.

Do-It-Yourself Stories from Customers like You Heater box not well supported   John S. • Waldport , OR • April 10, 2015

Replaced heated box support bracket. Read more

More
$11.95

IN STOCK
Ships Today Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google