Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Ice buildup in freezer or warm fridge? This defrost heater melts frost from evaporator coils during the defrost cycle. Moderate DIY repair with video guide.
Tried to put refrigerator in defrost mode and defrost would not initiate. Checked the bi-metal and heater, both tested good. Replaced the ADC board and refrigerator went in to defrost. problem solved. Read more
Connects water supply to ice maker. Replace if cracked, broken, or leaking. Installs in freezer compartment with two screws. Essential for leak-free operation.
I watched your how-to video. It explained the repair PERFECTLY. It was an easy repair and the video was very detailed. It took the guesswork out of the repair. I was done in 5 minutes. thanks for taking the time to post videos for your parts. I'll shop here again. Best Regards, Chad M Read more
Fix a water dispenser or ice maker that won't work. This dual water inlet valve controls water flow to both systems. DIY repair takes 5-30 minutes.
Fix was very easy, I ordered a replacement dual water inlet valve from appliance parts pros .com and waited just a few days for order to be received. After I received the order, I got my tools out and pulled the refrigerator out from the wall. Unplugged the power cord form the wall, turned off the water at the valve in the wall, grabbed my nut driver and removed the cardboard backing on the lower side of the back. I checked that the part that I received to wee if it matched the original part,... Read more
Plastic water supply line that connects household plumbing to your ice maker. Replace if cracked, pinched, severed, or leaking. 1/4-inch tubing kit.
Seals refrigerator door to prevent warm air entry and maintain temperature. Replace if cracked, torn, or doors won't close tightly. Verify fit by model.
I took the new seal out of it's packaging and used a blowdryer on low heat to soften up the seal so that the crease from shipping (it was folded to ship) disappeared. Next I took the refrigerator door off, removed the old seal, & cleaned the area where the new seal would be applied. Following the video on the Appliance Pro Parts website, I re-installed the new seal and put the door back on. Last step was to snap on the new hinge cap I ordered. The video online was easy to follow and this... Read more
Plastic endcap that fits on the end of refrigerator shelf trim for a finished look. Replace if cracked, broken, or missing to secure trim in place.
I took the old shelf bar out the door and replaced it with the new one. Fit perfectly. Looks awesome. Read more
Creates an airtight seal around your freezer door to maintain consistent temperatures and prevent cold air loss. Replace if torn, cracked, or loose.
Replaced Case Water Filter assembly DA81-05883A. Please read my post entirely before starting. I completed all the tasks that I could without having to disconnect the refrigerator since it was full of food. First I removed the panel on top of the refrigerator that covers the water line that feeds the dispenser. Do not disconnect any electrical connections or the water line at this time. Remove the panel from the back bottom of the refrigerator that covers the compressor and water valve,... Read more
Clear plastic snack pan drawer for refrigerator storage compartment. Replace if cracked, scratched, clouded, or broken. Slides into existing tracks.
I searched the web for a replacement drawer to no avail. Once I reached this site I was pretty discouraged when your site also said my drawer was no longer available. A suggestion for a different replacement drawer that MAY work was my only option. I purchased the drawer with the understanding that it could be returned if it didn't fit. To my surprise it came in two days and fit perfectly. I am thrilled every time I open the fridge. I am VERY pleased with this purchase and would... Read more
Ice dispenser broken or slow? The ice container assembly holds and dispenses ice through your refrigerator door. Easy DIY fix with no tools required.
Simple fix purchased complete assembly slid old one out and new one in transferring ice was hardest part Read more
Water tube assembly supplies water from inlet valve to ice maker and dispenser in your refrigerator door. Replace if cracked, leaking, or broken.
After watching installation videos on each felt I could pull it off and ordered and received replacement water reservoir and water dispenser tube assembly. Reservoir installation went off without a hitch outside of the added step of the need to remove the entire main in waterline assy in order to access the connectors which also were not as represented in video, in that they were not the press-to-release type but standard threaded compression types. Water Dispenser tube/spout assembly was much... Read more
Secures the handle end cap to the center of your refrigerator door. Replace if missing, stripped, or lost during handle repairs. 8-18 x 1/2 inch size.
This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one. Read more
Stores and chills water before dispensing. Replace if cracked, leaking, or causing slime/film buildup in dispensed water. Installs inside refrigerator.
Fix an ice maker that stopped working or leaks water into the bin. This ice mold tray replacement takes about 10-20 minutes with our step-by-step video.
I have a Whirlpool Side-by-side Model ED22PWXBW01. A year ago, the ice cubes started freezing together in the rear of the ice bin for no apparent reason. Although the problem started off small, it gradually grew much worse, and finally I could see water dripping out of the ice mold and into the bin during the fill cycle. Re-levelling the refrig didn’t help, nor did adjusting the cube size / fill level. With guidance from the video, I removed the icemaker from the wall of the freezer. The... Read more
Fix a loose or wobbly dispenser paddle with this strain relief. Cushions the dispenser arm connection to prevent wear. Easy 5-minute repair with video guide.
With the help of the fantastic videos provided on the web site for each replacement part, it was extremely easy to complete the repair Read more
Refrigerator warm but freezer cold? Noisy evaporator fan? This mounting grommet reduces vibration and noise. Takes about 1 hour to replace with video guide.
I noticed Ice maker Quit for the third time in 15 years so I decided to buy another Ice maker, I installed it and NO ice still?? Well I went after the other problem thinking if it does not get cold enough maybe ice maker won’t work. I ordered Defrost Switch, Heater and Evaporator Fan just to be safe. I replaced all three, the fan was noisy, the heater OHM’d ok but I replaced it as did the defrost switch, I put it back together, the Freezer got to 0 degrees and the frig got to 38 degrees so I... Read more
Replacement shelf stud kit for refrigerator compartments. Secures adjustable shelves to interior liner. Needed when original studs crack or break off.
My Whirlpool fridge is 12 yrs old. The crisper drawer supports finally gave up. I googled the make and model number for repair parts and AppliancePartsPros.com came up. I was actually surprised that I found the support peg and stud. I watched the video on their site on how to replace them, saw that it was easy and ordered the parts that afternoon. To my utter amazement the parts came via FedEx the following afternoon! I have to admit if I didn't watch the video I wouldn't have known how... Read more