Whirlpool Gu2300xtv/S2 Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10462232
If your detergent dispenser is loose or falling off, this bracket secures it to the door panel. Moderate DIY repair requiring door disassembly.
Do-It-Yourself Stories from Customers like You
Dishwasher detergent dispenser Howard K. • Rockaway , NJ • November 01, 2015
Pulled a video from online and ordered my parts from Appliancepartspros.com. This was the second repair I've done with your help, the last being my washing machine. This time I replaced the dishwasher detergent dispenser on my Kitchen Aid. You guys make it so simple and give me the confidence to do it myself!
Read more
More
$22.95
- Compare At:
-
$27.08
- You Save:
-
$4.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8580309
Door won't latch or close properly? The door latch strike secures your dishwasher door for a watertight seal. Simple 5-minute snap-in repair with video.
Do-It-Yourself Stories from Customers like You
Latch did not close properly causing dishwasher not to turn on and run Rani S. • Henrico , VA • March 24, 2020
I ordered this part and switched the previously used one.
Read more
More
$50.57
- Compare At:
-
$60.18
- You Save:
-
$9.61
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8575897
Wheel mount assembly for dishwasher upper rack. Attaches to rack and glides along side rails. Replace when cracked, broken, or worn for smooth rolling.
Do-It-Yourself Stories from Customers like You
Upper rack in dishwasher guide wheel broke easy repair after watching video Frank F. • Jefferson Twp , PA • September 29, 2014
Replaced both wheels after watching your video. easy repair
Read more
More
$11.78
- Compare At:
-
$14.02
- You Save:
-
$2.24
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10109200
This replacement screw secures panels, brackets, and other components in your appliance to keep them aligned and rattle-free. Replacing worn, stripped, or missing hardware restores a tight fit and helps maintain safe, quiet operation.
- Fastens panels, brackets, or internal parts to the cabinet/frame
- Helps maintain alignment to reduce vibration and rattling
- Replaces lost, stripped, or corroded screws
- Common symptoms: loose panels/trim, rattles, or a screw that won't tighten
What's included: One screw. Install notes:
- Disconnect power; shut off water or gas if applicable
- Match thread and length to the original; replace one at a time to keep alignment
- Start threads by hand to avoid cross-threading; use the correct driver
- Tighten snugly—do not overtighten, especially into plastic or thin sheet metal
Do-It-Yourself Stories from Customers like You
Missing baffles Anna S. • Shoreview , MN • January 31, 2016
I ordered two replacement baffles and screws, then lifted the top of the dryer to access the drum and installed the two new baffles.
Read more
More
$7.56
- Compare At:
-
$8.32
- You Save:
-
$0.76
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9741232
Quantity of ONE.
Size: 8-18 x 5/8 inch.
(#8 screw, 18 threads per inch, 5/8 inch long)
Do-It-Yourself Stories from Customers like You
My dishwasher was leaking out copious amounts of water while cycling Michael K. • Oakland , MI • July 11, 2019
While at my sister's house, she showed me how to access & dismantle the housing unit on her dishwasher, thinking the issue might be from that area. So, when I came home, I opened up my housing unit and found that several of the screws had come out and the pump outlet seal was stretched out and partially outside of the unit itself. I located all of the missing screws & discovered I was still missing one, which my husband helped me order with the pump outlet seal. I easily replaced the old seal...
Read more
More
$7.56
- Compare At:
-
$8.90
- You Save:
-
$1.34
Genuine Whirlpool part
By: Whirlpool
Part Number: 4317824
The Power Cord Kit is an OEM replacement part for Whirlpool dishwashers. It is a 3-prong grounded, 16-gauge cord that includes all the hardware needed for installation. Includes all hardware needed for installation.
Causes of a bad power cord can include normal wear and tear over years of use, accidental impacts or cuts to the wiring, or improper installation that damages components.
Symptoms of a bad power cord include:
- The dishwasher not turning on or completing cycles
- Warm or hot power cords during operation
- Frayed, cracked, or exposed copper wiring
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Mice chewed the drain hose and power cord Noah C. • Eastsound , WA • February 16, 2015
Read directions on how to change the power cord and watched video on your site on how to change the drain hose. Everything went perfectly.
Read more
More
$22.53
- Compare At:
-
$26.81
- You Save:
-
$4.28
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10177098
The Hex-Head Screw is an OEM replacement part for use in Whirlpool dishwashers. This metal screw measures approximately ¾ inch long. Its primary purpose is to secure the dispenser bracket in place, ensuring stable operation. This hex-head screw is designed for use with compatible hexagonal tools. This makes installation and removal straightforward. This part is sold individually and is guaranteed to fit your dishwasher door panel. This screw is compatible with select Whirlpool brand models including Amana, Crosley, Estate, Inglis, Jenn Air, Kenmore, Kitchen Aid, and Maytag.
Do-It-Yourself Stories from Customers like You
Dishwasher detergent dispenser Howard K. • Rockaway , NJ • November 01, 2015
Pulled a video from online and ordered my parts from Appliancepartspros.com. This was the second repair I've done with your help, the last being my washing machine. This time I replaced the dishwasher detergent dispenser on my Kitchen Aid. You guys make it so simple and give me the confidence to do it myself!
Read more
More
$10.93
- Compare At:
-
$11.36
- You Save:
-
$0.43
Genuine Whirlpool part
By: Whirlpool
Part Number: WP676455
Grey vinyl touch-up paint for repairing chipped, rusted, or damaged dishwasher rack coating. 4oz bottle with brush. Restores protective coating.
Do-It-Yourself Stories from Customers like You
Rusty tips on tops of posts in top and bottom racks of kitchen aid dishwasher James O. • Bedford , OH • July 04, 2016
Used the vinyl touch up paint on the tops of posts and slid vinyl tips over 130 posts. The paint acts as an adhesive to keep the tips secure.
Read more
More
$42.43
- Compare At:
-
$50.92
- You Save:
-
$8.49
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268321
Secures the upper spray arm assembly in the dishwasher tub. Replace if cracked, broken, or worn causing the spray arm to droop or become misaligned.
Do-It-Yourself Stories from Customers like You
Upper spray arm fell off of rack John G. • Media , PA • February 04, 2017
The upper spray arm mount on our KitchenAide dishwasher wore out, allowing the spray arm to droop into the dishes and pots in the lower rack. The replacement part was in stock and it arrived the very next day after I ordered it, with no special shipping cost. An amazing experience! The part took just 10 minutes to install--it could have taken less, but it always takes a few more minutes with a new fix. The washer is back in action, as good as new. I'm delighted with the response of...
Read more
More
$50.57
- Compare At:
-
$59.67
- You Save:
-
$9.10
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10267076
This small plastic clip secures the tine row guards or protective caps on the dishwasher's upper or lower dishrack. It keeps the vinyl guard strips in place so they can protect dishes from scratching and prevent the rack tines from rusting. Replace this clip if the guard strips are falling off, sliding out of position, or if the original clip has cracked or broken.
Do-It-Yourself Stories from Customers like You
Top rack tracks and stoppers were broken Martina B. • Helotes , TX • December 19, 2015
I searched the model on Appliancepartspros.com and ordered the items needed with overnight shipping. My order came the next day :) All parts were in stock and came clearly labeled and orderly packaged. Within 10 minutes my dishwasher was back in business and I was one happy camper.
I would order from here again anytime and attempt to fixt the issue myself. Much cheaper that having somebody come out, only to tell you that they have to order the parts and come back at a later time to fix the...
Read more
More
$24.68
- Compare At:
-
$29.37
- You Save:
-
$4.69
Genuine Whirlpool part
By: Whirlpool
Part Number: WP676453
Color: White. 4oz bottle with brush used for touching up damage to your dishracks. For blue use W10840471. For grey use WP676455. For tips use 675679
Do-It-Yourself Stories from Customers like You
Tines on my dishwasher rack was rusting rust was showing on my dishes Jean M. • Lenoir , NC • January 10, 2015
Ordered dishwasher rack tine tips and bottle of vinyl touch up paint. I applied the paint to each tine and then placed the tips on the tines. I waited a few hours before using my dishwasher to allow the paint to dry and allow the tips to stick to the tines.
Read more
More
$38.23
- Compare At:
-
$45.88
- You Save:
-
$7.65
Genuine Whirlpool part
By: Whirlpool
Part Number: W10817436
This factory-spec screw secures panels and components in your appliance. Replacing a missing or stripped fastener restores a tight, rattle-free fit so parts stay aligned and operate as designed.
- Fastens brackets, panels, and internal components to their mounting points
- Maintains alignment and reduces vibration during operation
- Replaces missing, worn, rusted, or stripped hardware
- Helpful when you notice rattling, loose panels, gaps, or parts shifting out of position
What's included: 1 screw Install notes:
- Disconnect power; shut off water or gas supply if applicable
- Align the part being secured and remove any damaged hardware
- Hand-start threads to avoid cross-threading; tighten with the correct driver
- Do not overtighten; verify the assembly is secure and operates freely
Do-It-Yourself Stories from Customers like You
Wheel tub broken. Paul K. • Belleville , NJ • January 11, 2019
Replaced Wheel-Tub.
Read more
More
$8.72
- Compare At:
-
$9.59
- You Save:
-
$0.87
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8572618
Dishwasher leaking from bottom or making grinding noise? The sump housing often cracks or wears out. Moderately difficult repair, about 45 minutes.
Do-It-Yourself Stories from Customers like You
Leaking sump housing Allen G. • Elkhorn , NE • January 15, 2016
I noticed the floor around the dishwasher was starting to get wet and warp the wooden floor. The chopper had gotten out of line and had cut a pinhole into the sump housing and the dishwasher was leaking badly. It was quite easy to repair. Just unhook the drain hose and the wire connectors, twist off the turbidity sensor and waste motor, pull out the shims and the whole assemple comes up and out. The hardest part was pulling the motor off of the assembly, since I wasn't sure if I needed to...
Read more
More
$136.95
- Compare At:
-
$164.34
- You Save:
-
$27.39
Genuine Whirlpool part
By: Whirlpool
Part Number: W11027055
Fixes broken heating element brackets causing sagging or rattling noises in your dishwasher. Simple snap-on replacement restores proper element alignment.
Do-It-Yourself Stories from Customers like You
Not cleaning well, silverware very bad. Walter M. • Labelle , FL • December 10, 2017
Replaced spray arms and tube. Found all had debris in them and prohibited water pressure from reaching items. After replacement everything comes out sparkling. Don't understand how the spray arms getting plugged. Almost like waste water is recycled. Turns out to be a very easy project and if needed AppliancePartsPro has information and directions available at your finger tips.!
Read more
More
$21.79
- Compare At:
-
$25.71
- You Save:
-
$3.92
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268895
Fix dishwasher overflows and leaks with a new float assembly. Controls water level to prevent overfilling. Moderate DIY repair with video guide.
Do-It-Yourself Stories from Customers like You
Kitchenaid dishwasher kudp02frss2 leak at float switch at front right of unit Richard B. • Mahwah , NJ • December 02, 2016
Removed bottom cover, located leak at float switch, removed and replaced float switch kit.
The toughest part of the repair was removing the Float & Retainer Assembly (in the interior of the machine tank) which broke when I pushed it back and pulled it straight up as suggested in the service manual. The Float Switch Kit (attached to, and below the float, below and outside the tank) has a folding plastic cover which fastens with plastic clips. If you open the switch kit before removing the...
Read more
More
$54.25
- Compare At:
-
$64.56
- You Save:
-
$10.31
Genuine Whirlpool part
By: Whirlpool
Part Number: W10806701
Dishwasher not spraying or making loud buzzing noise? Replace the pump and motor assembly. Moderate DIY repair takes 2-3 hours with basic tools.
Do-It-Yourself Stories from Customers like You
We heard a funny noise and then as time went by the dishwasher stopped cleaning the top rack eventually the bottom rack was not getting clean Deana P. • Sand Lake , MI • January 13, 2017
1st we took the inside washer arms out and made sure they were clean and not blocked by something . When That failed, I called a local appliance repairman . After 2 messsges and absolutely no return call, I went on line and googled what could cause the problem. It recommended replacing the pump motor assembly . So we decided to try it. Ordered part. Came very fast . I looked up instructions on you tube and we followed this and made the repair . Dishwasher is working correct and dishes are...
Read more
More
$206.50
- Compare At:
-
$245.73
- You Save:
-
$39.23