Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Ice maker not working or won't dispense? This ice bin safety switch detects when the bin is in place to activate your ice maker. Easy DIY fix.
Part easily replaced and problem was solved. Saved service call. Read more
Ice won't dispense but you hear the door open? This hex drive shaft connects the motor to the auger. Simple 30-minute fix restores ice dispensing.
I ordered the parts from you guys and printed the diagrams you had available. With that the repairs took less than 30 minutes. Read more
This ice container (ice bin) stores ice made by the icemaker and interfaces with the dispenser drive to deliver cubes or crushed ice. Replacing a cracked or worn bin restores dependable ice storage and dispensing performance.
Replaced the ice bucket assembly. Read more
Secures the roller to your refrigerator drawer so crisper and pantry pans glide smoothly. Replace when drawers stick or wobble. Confirm fit by model number.
I purchased replacement parts to completely replace basket, face plate, and rollers. I received exactly what I ordered. The only problem I had was removing the part(s) from the shipping box. I thought the part came assembled (as rollers had been installed onto the basket), but the face plate had not been snapped into place. When I removed everything from the shipping box as one piece, the face plate fell off, hit the tile floor, and cracked. Bummer. Since the original face plate was in good... Read more
This 8-18 x 5/8-inch screw secures dryer panels, brackets, and covers. Replace missing or stripped fasteners to restore a tight fit and stability.
I put all pieces that I ordered on the dryer and plugged it in. Read more
Replaces the refrigerator water inlet tube that routes water from the inlet valve to the internal water system. Order a new tube if cracked or leaking.
Replaced hoses. They were not an exact replacement but they did end up working with the purchase of one additional fitting (5/16 x 1/4 coupler) Read more
Replacement fastener screw for appliances. Secures panels, trim, clips, and components. Needed when original screws are stripped, missing, or damaged.
Removed the handle with two screws on the inside front and pulled out the custom wood panel. Pulled the compactor out from under cabinet. Tipped it over on back of unit, supporting it with a little foot stool. Unscrewed two lower screws at bottom of unit holding black trim panel (that held wood panel in place) and lower black rubber flap. Removed two screws on lower outside side of unit that held the foot pedal. Slid off black U shaped metal frame from top of compactor towards bottom. Slid on... Read more
Fix a refrigerator that won't cool, cycles on and off quickly, or has a non-working ice maker with this electronic control board. Manages temps and defrost.
I don’t think I needed the capacitor and relay, but while I was at it I figured I would. Originally we found we had an issue when water cane out of the ice maker. The freezer was hovering around freezing and the refrigerator was about 33 deg. I unplugged the refrigerator and it came back on and ran about a day. The next night, same thing. This time cycling power did not seem to help. Removing the rear cover where the control board was and moving it around allowed it to turn on next time I... Read more
Replaces a worn or broken door closing cam thimble in your refrigerator hinge assembly. Restores the smooth ramp action needed for proper door movement.
Refrigerator not cooling or compressor shutting down? This start device kit supplies boost current to the compressor and prevents overload. Easy DIY repair.
Ordered two parts. The Control Board and Start Device. Both needed to be replaced. I watched a video on how to take it out and install the new one. I did this on my own without the help of my husband. Very easy to install. Read more
The Handle Set Screw is an OEM part for Whirlpool refrigerators. As an internal component, the set screw is used to securely hold refrigerator door handles in place for easy opening and closing of access doors.
Symptoms of a bad handle set screw include:
Causes involve wear from repeated use or accidental tightening damage stripping threads and allowing handle loosening, affecting usability.
This OEM Whirlpool part is also compatible with some Kenmore and KitchenAid models.
Rather than fighting the set screw, I ordered a new handle and extra parts to fix it. My father taught me to use anti seize which I used on all the threaded materials. Appliance parts and all the parts listed easy to see and Order Read more
Routes water from the filter housing to the outlet. Replace if cracked, kinked, leaking, or broken to restore proper water flow and prevent leaks.
Replaced the tube. The original part number could not be found. This tube that we ordered had an curved connector at the bottom and a hard connector on top. The original tube had a right angle connector on the bottom and a smaller connector on the the top. The curve on the bottom worked. We had to cut the top connector off the tube for it to fit. We then secured it with the original metal bracket at the top. No leaks! All working fine now. Read more
Replaces worn or broken refrigerator door hinge cam. Restores smooth door pivot and secure closing. Essential when cam is cracked or door misaligns.
I ordered the door hinge cam kit, both the hinge, lower and upper cam. I followed videos found on the web. I would recommend taking the refrigerator door off by removing the upper hinge bracket and lifting the door off the lower hinge. It was much easier to replace the hinge and cam with the door off. One video suggested using Di-electric grease to lubricate the cam surfaces. Read more
The Hinge-Door is an OEM part for Whirlpool refrigerators. The refrigerator door hinge is a crucial component that allows the door to properly open and close while securely holding it in place. These hinges are responsible for smooth and reliable door operation through thousands of openings and closings.
Causes of a bad hinge can include wear and tear from prolonged use, stress from overloading the door, or accidental impact damage.
Symptoms of a bad hinge include:
This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Connects inlet valve to water system in your refrigerator. Replace if cracked, kinked, or leaking at connections to restore leak-free water flow.
Water line coming out of inlet valve to ice maker was cracked. Removed the paperboard cover from the bottom of the back of the fridge, then unplugged the water line going from the inlet valve to the ice maker. Wasn't sure this new tube was going to work, because the original had an elbow on it. Fit just fine. Removed grille from front and disconnected other end of ice maker water line. Attached new line and now I have ice! Read more
Color: Midnight Grey
Ordered the part. It came in pretty quick and was an exact match. Googled the instructions, followed them step by step. The only thing I did different was I marked the wires so I could put them back right. Took around an hour to replace. Wasn't difficult at all. Read more