Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Connects water line sections in your refrigerator. Replace if cracked, leaking, or damaged to restore secure connections to ice maker and dispenser.
Thought leak was coming from icemaker but refrigerator was making ice just fine. had puddle on floor just below freezer door. upon closer inspection realized leak was coming from drain line. there were 2 pieces of tubing and the connector. leak was coming from where tubing goes into connector. wanted to replace it. didn't know what it was called. did live chat with someone I think was named James. he sent me diagrams and I could identify the part. once identified I ordered it. boom.... Read more
Ice not dispensing from your refrigerator? The auger motor powers the mechanism that pushes ice through the chute. Moderate DIY repair with basic tools.
Installed a AP6007346 motor Read more
Fix clicking noises or uneven cooling in your refrigerator. This air damper diffuser controls airflow between compartments. Easy DIY repair in under an hour.
Removed & replaced baffle. Make sure you have a 1/4" nut driver. You can't see the nut that is at a 90 degree angle from the front of the refrigerator. There is a second nut hidden behind the air filter at the back of the compartment as well. Once you remove these two, the plastic housing comes off & the assembly (which is mostly made of Styrofoam) is easily replaced. Read more
Thimble bushing that fits inside the refrigerator door cam to create a smooth bearing surface on the hinge pin. Replace if worn, cracked, or missing.
Easy fix. Took two screws out of top door hinge. Lifted door off of bottom hinge. Laid door on blanket on floor. One cam part went on the hinge that was on the fridge, snapped in place. One cam part went on bottom of door, one screw to replace. Replaced door on bottom hinge then put top hinge back on. Job done. Read more
Ice maker not working or won't dispense? This ice bin safety switch detects when the bin is in place to activate your ice maker. Easy DIY fix.
Part easily replaced and problem was solved. Saved service call. Read more
Ice won't dispense but you hear the door open? This hex drive shaft connects the motor to the auger. Simple 30-minute fix restores ice dispensing.
I ordered the parts from you guys and printed the diagrams you had available. With that the repairs took less than 30 minutes. Read more
This ice container (ice bin) stores ice made by the icemaker and interfaces with the dispenser drive to deliver cubes or crushed ice. Replacing a cracked or worn bin restores dependable ice storage and dispensing performance.
Replaced the ice bucket assembly. Read more
Secures the roller to your refrigerator drawer so crisper and pantry pans glide smoothly. Replace when drawers stick or wobble. Confirm fit by model number.
I purchased replacement parts to completely replace basket, face plate, and rollers. I received exactly what I ordered. The only problem I had was removing the part(s) from the shipping box. I thought the part came assembled (as rollers had been installed onto the basket), but the face plate had not been snapped into place. When I removed everything from the shipping box as one piece, the face plate fell off, hit the tile floor, and cracked. Bummer. Since the original face plate was in good... Read more
This 8-18 x 5/8-inch screw secures dryer panels, brackets, and covers. Replace missing or stripped fasteners to restore a tight fit and stability.
I put all pieces that I ordered on the dryer and plugged it in. Read more
Replaces the refrigerator water inlet tube that routes water from the inlet valve to the internal water system. Order a new tube if cracked or leaking.
Replaced hoses. They were not an exact replacement but they did end up working with the purchase of one additional fitting (5/16 x 1/4 coupler) Read more
Grey cam riser for refrigerator door hinge assembly. Replaces worn or broken cam that supports door alignment. Essential for door self-closing function.
My Whirlpool refrigerator model GSS26C4XXF03 door wouldn’t swing shut all the way like it used to. So I changed the two lower cams. This cam #WPW10257203 was a perfect match but I needed to change the matching cam on the hinge, also, which require some modification to fit (I ordered cam #W11311687). The whole thing would have taken less than 15 minutes if I didn’t have to modify the other cam. Read more
Replacement fastener screw for appliances. Secures panels, trim, clips, and components. Needed when original screws are stripped, missing, or damaged.
Removed the handle with two screws on the inside front and pulled out the custom wood panel. Pulled the compactor out from under cabinet. Tipped it over on back of unit, supporting it with a little foot stool. Unscrewed two lower screws at bottom of unit holding black trim panel (that held wood panel in place) and lower black rubber flap. Removed two screws on lower outside side of unit that held the foot pedal. Slid off black U shaped metal frame from top of compactor towards bottom. Slid on... Read more
Fix a refrigerator that won't cool, cycles on and off quickly, or has a non-working ice maker with this electronic control board. Manages temps and defrost.
I don’t think I needed the capacitor and relay, but while I was at it I figured I would. Originally we found we had an issue when water cane out of the ice maker. The freezer was hovering around freezing and the refrigerator was about 33 deg. I unplugged the refrigerator and it came back on and ran about a day. The next night, same thing. This time cycling power did not seem to help. Removing the rear cover where the control board was and moving it around allowed it to turn on next time I... Read more
Replaces a worn or broken door closing cam thimble in your refrigerator hinge assembly. Restores the smooth ramp action needed for proper door movement.
Refrigerator not cooling or compressor shutting down? This start device kit supplies boost current to the compressor and prevents overload. Easy DIY repair.
Ordered two parts. The Control Board and Start Device. Both needed to be replaced. I watched a video on how to take it out and install the new one. I did this on my own without the help of my husband. Very easy to install. Read more
The Handle Set Screw is an OEM part for Whirlpool refrigerators. As an internal component, the set screw is used to securely hold refrigerator door handles in place for easy opening and closing of access doors.
Symptoms of a bad handle set screw include:
Causes involve wear from repeated use or accidental tightening damage stripping threads and allowing handle loosening, affecting usability.
This OEM Whirlpool part is also compatible with some Kenmore and KitchenAid models.
Rather than fighting the set screw, I ordered a new handle and extra parts to fix it. My father taught me to use anti seize which I used on all the threaded materials. Appliance parts and all the parts listed easy to see and Order Read more