Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Wtw4800x02 Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Washer Water Fill Hoses
By: Pro
Part Number: TJ725RBFFP

Replacement water fill hoses for washing machines. Connect home water supply to washer. Replace when cracked, leaking, or showing rubber wear or corrosion.

Do-It-Yourself Stories from Customers like You Washer would not spin nor adgitate   Jeff A. • Stow , OH • June 28, 2015

Motor control board was flashing 4 times, indicating that the mode shifter had an error. I disconnected the mode shifter's wire from the controller and measured the resistance between the 2 leads with an ohmmeter. Since the reading was infinite, that meant that the mode shifter coil or in-line thermal sensor was electrically open, i.e. bad. As this fix is near a complete tear-down of the washing machine, here are a few tips I discovered. 1) the hub nut is difficult to remove and you need a... Read more

More
$13.71

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Capacitor
Genuine Whirlpool part
By: Whirlpool
Part Number: W11158830

Washer won't start or advance through cycles? A failed capacitor prevents proper motor startup. This part stores energy to boost the motor during operation.

Do-It-Yourself Stories from Customers like You A loose hose.   Adrian H. • Dayton , TX • June 30, 2021

I originally thought it to be my capacitor. But after installing the new one my machine still wouldn't wash, upon further inspection the hose that connects to the water level indicator on the control panel had popped a loose. I reconnected it and my washer is working just fine now. So try and do a complete inspection before spending unnecessary money ($125) like I did. Read more

More
$106.37

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Water Inlet Valve
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10356257

This water inlet valve controls the flow of hot and cold water into the washing machine tub during fill cycles. It contains solenoid-operated ports that open and close in response to signals from the control board. Replace this valve if your washer is not filling with water, filling slowly, leaking from the back, or continuing to fill when it shouldn't.

Do-It-Yourself Stories from Customers like You No cold water into washer   Jack F. • Altoona , PA • March 01, 2015

Replaced water inlet valve Read more

More
$93.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10273971

This factory screw secures panels, brackets, and other components in your appliance. Replace a missing, stripped, or corroded fastener to restore a tight fit and keep parts properly aligned and rattle-free.

  • Secures appliance components and panels in their mounting points
  • Replaces damaged, stripped, or missing hardware
  • Helps reduce rattling or vibration from loose parts
What's included: One screw Install notes:
  • Disconnect power; shut off water or gas supplies if applicable
  • Match location with the original screw; start threads by hand to avoid cross-threading
  • Tighten until snug; do not over-torque, especially into plastic or thin metal
  • Reinstall any covers or panels and test for secure fit

Do-It-Yourself Stories from Customers like You E3 F5   Stacy J. • Elk Grove , CA • August 03, 2018

In the past we’ve fixed the latch with just high speed great. This time we ordered a new latch and replaced it. Washing machine has been working perfectly ever since. It was very easy to find the right part by simply entering the model number of my washing machine. It was quick delivery and the correct part. Very happy to have a working washing machine again. Read more

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Drain Pump Filter
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10215093

Washer won't drain or clothes have residue? Replace the drain pump filter that screens debris and prevents clogs. Protects pump from damage.

Do-It-Yourself Stories from Customers like You The gears were rusted and stripped in the transmission and the hub was cracked.   Blane L. • Columbus , OH • January 11, 2019

On a 3 year old Maytag...........New gear case and hub installed. The videos produced by AppliancePartsPros are quite helpful, even though the video was not of the exact make and model number I was repairing, the similarities were so great that it may as well have been the same make and model number (whirlpool and Maytag essentially make the same thing and slap I different sticker on them) Read more

More
$53.21

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Water Inlet Valve Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10432353

Fix washer water leaking into tub or slow dripping when off. Water inlet valve assembly replacement stops fill valve leaks. Easy DIY repair with video.

Do-It-Yourself Stories from Customers like You Water inlet and lid latch switch   Michael R. • Almena , WI • March 28, 2016

I ordered from this company expecting the parts to be later than they said and the parts showed up in 2 days like they said. Just before the Easter holiday even. Amazingly fast. Very satisfied!!! Washer is up and running again. Great job on getting me my parts! Thank you! Read more

More
$132.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Drain Hose Extension Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: DRNEXT4

Extends your washer's drain hose to reach distant standpipes or sinks. Includes coupler and clamps. Replace when you need extra length for installation.

Do-It-Yourself Stories from Customers like You Washer drain hose was too short to reach drain   Steve D. • Chamblee , GA • July 14, 2014

Attached drain hose extension and it more than reached the drain. Read more

More
$48.57

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Control Board
Genuine Whirlpool part
By: Whirlpool
Part Number: W10480177

Fix a washer that won't start, cycle properly, or respond to controls. This control board replacement restores normal operation. Moderate DIY repair.

Do-It-Yourself Stories from Customers like You Washing machine would not cycle correctly   Mike H. • Waukesha , WI • February 07, 2015

Removed control panel from the machine, unbolted control board, replaced with new one, changed connections from old to new and put back together. Read more

More
$213.31

IN STOCK
Ships Today Guaranteed
Add to Cart
Laundry Center Cycle Selector Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10285512

Fix erratic or unresponsive cycle selections with this laundry center rotary encoder switch. Mounts behind the cycle knob to restore accurate settings.

Do-It-Yourself Stories from Customers like You Temperature control switch failed to cold only.   Marilyn M. • Summerfield , FL • September 30, 2017

Replaced with a new one. Read more

More
$83.44

IN STOCK
Ships Today Guaranteed
Add to Cart
Appliance Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8281163

Replacement screw for securing panels, brackets, and internal components. Replaces missing, stripped, or damaged fasteners to restore proper fit.

Do-It-Yourself Stories from Customers like You Whirlpool wtw5000dw1 top loader door would not lock, spin cycle would not function   John C. • Cornelia , GA • December 24, 2021

Replaced door latch and switch. Parts are plastic so you must know what you are doing to avoid breaking new parts. Videos were hard to find for my model - eventually I found a video that addressed a different problem but required disassembly of a washer cabinet similar to mine. I removed the control panel using a putty knife and unplugged the wire to the latch switch. Then I remove 3 screws securing the washer's top panel to the back panel. Using a rubber mallet, I gently knocked the top panel... Read more

More
$9.05

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Water Level Pressure Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10268911

Washer overfilling or underfilling? The water level pressure switch senses tub pressure to control fill cycles. DIY repair in 20 minutes or less.

Do-It-Yourself Stories from Customers like You My washer was overfilling   Steve T. • Warwick , NY • January 25, 2016

Called appliance parts and asked, what was the fix. Told it was fill switch and that I could order it. I was amazed that I received the part the next day without even asking for overnight delivery. I installed the part in less then 20 min. Problem fixed.. Read more

More
$111.44

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Agitator Cam Driven Bearing
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3952374

Fix a slowly rotating or grinding agitator with this cam driven bearing. Often worn teeth cause agitation problems. Part of the complete cam assembly.

More
$5.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489069

Size: 1/4 inch hex head, 10-12 x 1/2 inch.

Do-It-Yourself Stories from Customers like You Broken handle foot pedal and missing parts   Donald M. • Lake Arrowhead , CA • April 05, 2015

This trash compactor is in our vacation home. We never use it and now we are selling the house. When I looked to replace it I was amazed at how expensive a new compactor would cost. I found the serial number on the current compact entered it and your web site came up. Your schematics were excellent and made the repair very easy! Read more

More
$7.56

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Retaining Nut
Genuine Whirlpool part
By: Whirlpool
Part Number: W10759923

Replacement retaining nut for washers and dryers. Secures components like pulleys, shafts, and assemblies. Order a new nut if yours is stripped or missing.

Do-It-Yourself Stories from Customers like You Would not go into spin cycle automatically   Daniel H. • Marlborough , MA • March 01, 2015

Have had this experience before. Ordered the same parts as last time plus a few more related components. Performed the repair in under an hour. All is good. Read more

More
$4.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Drain Hose Extension
Genuine Whirlpool part
By: Whirlpool
Part Number: 285863

Extends the drain hose approximately 4 feet. You must also order a drain hose connector kit: 285835.

Do-It-Yourself Stories from Customers like You Washer drain hose not long enough   Ray P. • Frankfort , IL • February 07, 2016

I ordered the drain extension kit and the hose connector kit. Read more

More
$31.59

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Fill Hoses 5 Ft 2-Pack
Genuine Whirlpool part
By: Whirlpool
Part Number: 8212487RP

Two 5-foot nylon braided hoses connect household water supply to washer inlet valves. Replace cracked, leaking, or aging hoses to prevent water damage.

Do-It-Yourself Stories from Customers like You Water inlet was obstructed   Jessica C. • Mount Shasta , CA • April 15, 2018

Watched u tube video. Ordered replacement water inlet valve and new hoses. Dismantled washer and replaced defective valve and installed new hoses. The repair went very easily and the washer worked perfectly as a result. Read more

More
$44.23

IN STOCK
Ships Today Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google