Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Spring Tension Hose Clamp is an OEM part for Whirlpool washing machines. It is designed to secure hoses in place, preventing leaks by maintaining consistent tension on the hose connections.
Over time, spring tension hose clamps can lose their effectiveness due to metal fatigue, corrosion, or damage from frequent tightening and loosening. This can lead to leaks and improper hose connections.
Symptoms of a bad spring tension hose clamp include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Took off cover, installed new parts. Read more
Suspension spring kit for washers. Supports tub weight and absorbs vibrations. Replace if springs are broken, stretched, worn, or missing. Includes 2 springs.
First remove the back from the washing machine. Top of the machine came off simple. To replace springs, I took a crow bar but it on the right side underneath where one of the springs should be. Lift the tumbler up remove and replace the spring. Did the same thing to the other side. On the tumbling unit there are spaces for three shock absorbers. Mine only had one shock in the middle. I put two new springs, one in the front and one in the rear. Then I replaced the right side spring with two new... Read more
Replacement water fill hoses for washing machines. Connect home water supply to washer. Replace when cracked, leaking, or showing rubber wear or corrosion.
Motor control board was flashing 4 times, indicating that the mode shifter had an error. I disconnected the mode shifter's wire from the controller and measured the resistance between the 2 leads with an ohmmeter. Since the reading was infinite, that meant that the mode shifter coil or in-line thermal sensor was electrically open, i.e. bad. As this fix is near a complete tear-down of the washing machine, here are a few tips I discovered. 1) the hub nut is difficult to remove and you need a... Read more
This locking nut is used for many purposes on a range of machines including household appliances. This nut is often used for leg leveling for machines. It will help with vibrations from washers and dryers. If the nut is used for this purpose and goes missing or becomes damaged, it could cause the machine to vibrate more and seem louder.Nuts are made from metal and are built to last a long time. However, there can still be issues that arise. In some cases, the nuts might go missing if they become loose and the machine is moved. They could also corrode over time and need to be replaced. The replacement of the nut is typically a fast and simple repair.The nut is a genuine OEM replacement part sourced from the manufacturer. It can work with washers, dryers, and combo machines, and is compatible with models from Whirlpool, Kenmore, Maytag, and Roper. The part is sold individually. Owners may want to have several on hand.
Replaced 2 springs and brackets. Also replace rear legs and front legs and re leveled. Works fine. Read more
Replaces broken or cracked drum baffle in front-load washers. Lifts and tumbles clothes during wash cycle. Snaps into drum interior. Easy DIY install.
After doing quite a bit of research and asking appliancepartpros forum if I needed to add a screw when installing, and receiving the answer the next day that is was not necessary, I snapped the part in place and went on with life. Read more
Fix water leaking from your detergent drawer. This dispenser holds and releases detergent, softener, and bleach at the right time. Easy DIY repair.
I was moving my washer and dryer on to a platform when the washer slipped and the drawer came out and broke. I was going to surprise my wife with this new setup. She was out of town and was due back in 3 days. I didn't want her to see my mistake. I got on line and found AppliancePartsPros.com and I am glad I did. Their price was reasonable and fair. I order the parts I needed late on Wednesday and they were delivered early on Saturday. I watched their self help video on how to replace the parts... Read more
Fix F20 error codes and water level issues with this washer air chamber. Connects to the pressure switch hose to regulate water fill. Easy DIY repair.
After having a technician come to look at my washer, diagnosing the problem, and then not having the part to fix it (which would've taken another week or so after the washer was down at this point for a week and a half) I decided I could fix it myself. The problem ended up being the styrofoam piece that was meant to protect the hose from rubbing on anything didn't do it's job. The result ended up causing a pin hole size puncture in the hose which was allowing air to escape. That hose, along... Read more
Fix a washer that won't fill with water or overfills with this water level pressure switch. Controls proper water amounts for each wash cycle.
Replaced the faulty switch with the new part. Found out tge problem by doing a simple Google search! Read more
Washer stops mid-spin or shows F6E1 error? The motor control board regulates drive motor speed and direction. Most DIYers replace it in 15-30 minutes.
On-line chat with AppliancePartsPros told me the error code was was for motor speed and they sent me a .pdf file on what to do to T/S it. Following the sheet I checked motor and Tack resistance and wiring - all OK, so I ordered a Motor Controller Ckt board assy. It arrived in 24 hours, during that time i watched the replacement videos and removed the old part. Upon receiving the new part I installed it (15 min), tested the washer (it worked), then put all the panels back on, pushed the washer... Read more
Extends your washer's drain hose to reach distant standpipes or sinks. Includes coupler and clamps. Replace when you need extra length for installation.
Attached drain hose extension and it more than reached the drain. Read more
Secure dryer vent hose to exhaust outlet and wall connection. Replace worn clamps to prevent duct slippage and maintain proper airflow. Confirm fit.
This hose clamp secures a hose connection to prevent leaks and keep your appliance running smoothly. It provides a tight, reliable hold on the hose fitting so water or air stays contained during operation.
Factory mounting screw secures panels, brackets, hinges, and covers on your washer. Replace missing, stripped, or rusted screws to restore secure fit.
The replacement part and YouTube video allowed me to repair my washer in less than 10 minutes. Read more
Stops excessive vibration, banging, and walking during spin cycles. This front counterweight stabilizes the drum assembly for smoother, quieter operation.
I ordered the needed parts w/o though incident. The site was easy to navigate. I was able to easily identify the parts needed is the provided diagrams and then find the parts and cost according to the corresponding number.. I was not sure of the manufacturer's designated name for the items so the diagrams was a big help. The parts arrived according to the estimated arrival date. I am happy with the easy and quick service I received. Read more
Replacement water hose for washers. Restores leak-free water flow between internal components. Replace if leaking or causing error codes. Verify fit.
This replacement screw secures appliance components and panels so they stay aligned and rattle-free during operation. Replace stripped, missing, or corroded hardware to restore a tight fit and dependable performance. What it does
Ordered parts and hubby replaced and now it works. Thanks. Read more