Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Flood Switch Assembly is an OEM part for GE dishwashers. This part detects water levels and prevent overfilling by shutting off the water supply if a potential flood condition is detected.
Causes of a bad flood switch assembly can include electrical failures, wear and tear over time, or damage from water exposure.
Symptoms of a bad flood switch assembly include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Ordered a new flood switch and activation stem from Aplliance Parts Pros.com. Order was delivered in about 3 days. Installed new switch and stem in about 15 min. Removed front kicker panel with two screws, the switch was just inside the panel secured with two screws. remove the electrical connector, removed screws, replace the two new parts..put the screws back in place and ran the washer...no overflows. Read more
This dishwasher flood switch seal sits around the flood/leak switch to create a watertight barrier at the switch opening. Replacing a cracked or flattened seal helps stop under-unit drips and keeps leak detection working properly.
Thanks to appliancepartspros.com the dishwasher was able to be repaired quickly and under budget. I removed the motor pump assembly and replaced it. I was also able to change out the faulty flood switch and replace the seals to stop the leak. The appliance is once again good as new and ready to run a new load of dishes. Read more
Dishwasher rack tine clip. Used to hold the tines in place within the rack. Color: gray. Measures about 1 inch wide by 1 inch high by 1-1/2 inches deep.
I replaced the pump drain assembly. The flapper valve was included in the assembly, so I did not need to order that. On previous repairs, the old drain hose was tricky to reinstall, so I replaced it and the hose clamp.The silverware basket had holes in the bottom and required replacement. I had some broken tine clips. Read more
Upper dishrack roller and axle kit includes: 4 rollers and 4 axles.
Replaced all of the broken parts with the new parts from Appliance Parts Pros. Read more
Removed upper basket out of dishwasher by removing slide arm stops. Turned basket upside down and removed broken parts. Took 5 minutes to take apart and put back together. Read more
This kit is used to repair a leaking pump on GE made dishwashers. For a complete pump/motor assembly get WD26X10013.
The main conduit was broken and the pump connector had a hole in it. The pump also was showing signs of leaking. I completely disassembled the dishwasher cleaned everything and reassembled. The repair videos are a big help. Thank you. Read more
The front door of a dishwasher is operated in part by the use of door springs. There are typically two door springs on most models. The door spring helps the user open and shut the door efficiently. If the door springs are worn out or broken, a replacement part is required.A visual inspection will determine if a door spring is missing, damaged, or worn out. If the dishwasher door no longer opens and closes smoothly, it's an indication that a repair is required. Replacing a dishwasher door spring is a straightforward process. Locate the existing springs and remove them. Line up the new door springs and hook the ends into place. Wear gloves for protection. Disconnect the dishwasher before starting the replacement.This door spring is an authentic OEM replacement part. It is sold individually. The component is made of durable, high-quality metal materials. The replacement door spring comes sourced directly from the manufacturer. The door spring is fitting for several different models of dishwashers. The part can be installed in General Electric, Hotpoint, and RCA devices.
I replaced the upper and mid spray arms and bearings, removed filters and screens and cleaned everything. Pulled pump and replaced the connector and the collection sump. Repair took about 3 hours and went very smoothly thanks to the AppliancePros video! I'm on the east coast so I could not believe it when the parts arrived less than 24 hours after I placed the order! Prices were great too . . . I'm a customer for life and my dishwasher cleans the dishes like new now! Read more
The Piston and Nut assembly replaced Check Valve and Body and gasket replaced Read more
Remove the unit. Unscrewed filler cup. Put on new part. FIXED PROBLEM. Read more
I found the schematics on your site and took my best guess at the individual components that I should replace, related to the flood switch. I guessed correctly. Read more
This was not an obvious source of a leak. The Tower Heater Assembly Nut developed a crack over time due to heat exposure. So the leak was gradual slowly getting worse over time. It was a hairline crack that ran down one of the edges of the nut making it hard to see. In talking to a pro he said it isn't a common problem. It is all the way in the back of the bottom of the dishwasher so it is not something you can see without pulling the dishwasher out and running it. The repair itself is easy. I... Read more
This turbidity sensor monitors wash water clarity so the machine can adjust wash cycles and rinse times for cleaner results and efficient water use. It replaces a failed or inconsistent turbidity reading to restore proper load sensing. What it does:
I used lime away, vinegar, finish washer cleaner none of them worked. Finally just use Brillo on the entire cabinet interior. It came out very clean. Only needed very light scrubbing. Then replaced the severely corroded filters Riser tube and upper jet which was not turning. After this the upper arm turned perfectly silverware and glassware and silverware came out rinse very clean. Will do preventative maintenance in the future. Dishwasher was about 5 years old GE Profile high-end Read more