Zbd6890k0011 Parts

Genuine Ge part

Flood Switch Seal (Dishwasher)

By: Ge

Part Number: WD01X10264

This dishwasher flood switch seal sits around the flood/leak switch to create a watertight barrier at the switch opening. Replacing a cracked or flattened seal helps stop under-unit drips and keeps leak detection working properly.

Forms a watertight seal where the flood switch mounts
Helps prevent water from entering the base pan
Common signs include water under the unit or visible wear on the old seal

What's included: One flood switch seal. Install notes:

Disconnect power and shut off the water supply before servicing
Remove the toe-kick; pull the unit forward if needed to access the flood switch
Release the flood switch, remove the old seal, and seat the new seal evenly—do not overtighten
Reassemble and run a short fill/rinse while checking closely for leaks

Do-It-Yourself Stories from Customers like You The motor pump assembly seized up and was inoperable the flood sensor was leaking and overflowing through the door Tim D. • Knoxville , TN • December 06, 2018

Thanks to appliancepartspros.com the dishwasher was able to be repaired quickly and under budget. I removed the motor pump assembly and replaced it. I was also able to change out the faulty flood switch and replace the seals to stop the leak. The appliance is once again good as new and ready to run a new load of dishes. Read more

Genuine Ge part

Tine Clip

4.9 (19)

By: Ge

Part Number: WD12X10116

Dishwasher rack tine clip. Used to hold the tines in place within the rack. Color: gray. Measures about 1 inch wide by 1 inch high by 1-1/2 inches deep.

Do-It-Yourself Stories from Customers like You The dishwasher would not drain sometimes Thomas W. • Oceanside , CA • October 02, 2016

I replaced the pump drain assembly. The flapper valve was included in the assembly, so I did not need to order that. On previous repairs, the old drain hose was tricky to reinstall, so I replaced it and the hose clamp.The silverware basket had holes in the bottom and required replacement. I had some broken tine clips. Read more

Genuine Ge part

Dishwasher Float

5.0 (4)

By: Ge

Part Number: WD12X10047

Dishwasher overflowing or leaking from the door? A faulty float can cause overfill issues. This float controls water level and prevents flooding.

Genuine Ge part

Dishwasher Upper Rack Inner Slide Rail

By: Ge

Part Number: WD30X10021

The inner track component that allows the upper dishwasher rack to slide smoothly in and out for loading and unloading. Replace when the rack binds, tilts unevenly, or becomes difficult to pull out or push back in.

Genuine Ge part

Middle Spray Arm Bracket

5.0 (2)

By: Ge

Part Number: WD12X10405

This middle spray arm bracket secures the mid-level spray arm to the upper rack, keeping it centered and aligned so it spins freely and delivers even spray coverage for reliable cleaning performance.

Supports and stabilizes the middle spray arm beneath the upper rack
Maintains proper clearance for smooth rotation and spray pattern
Replace if cracked, warped, or worn
Common symptoms: middle arm falls off or won't spin, wobbles, scraping noises, or poor cleaning on the upper rack

What's included: 1 middle spray arm bracket Installation notes:

Disconnect power to the dishwasher before servicing
Slide out the upper rack; release tabs or fasteners to remove the old bracket
Transfer the spray arm to the new bracket and snap or secure it in place
Spin the arm by hand to ensure free rotation before running a cycle

Do-It-Yourself Stories from Customers like You Dishwasher was not cleaning dishes like before when new found crack in upper basket water line feed David G. • Pell City , AL • February 05, 2016

Removed upper basket out of dishwasher by removing slide arm stops. Turned basket upside down and removed broken parts. Took 5 minutes to take apart and put back together. Read more

Genuine Ge part

Dishwasher Vent Cover

5.0 (3)

By: Ge

Part Number: WD12X10127

Replaces a cracked, broken, or missing dishwasher vent cover that mounts on the inner door panel. Shields the exhaust opening and directs airflow.

Do-It-Yourself Stories from Customers like You During a wash cycle a small puddle of water would appear on the floor John R. • Yorktown Heights , NY • December 17, 2016

I started thinking the obvious things first, bad door gasket, or a leak from the drain hose. I ran a rinse cycle and lay on the floor and watched for the water to come out. It trickled out from the bottom of the door. After researching it on the internet, I thought that maybe the door behind the vent cover was jammed in the open position and water was making it way through the vent and down the duct at the bottom of the door. I took the outer door panel off and could see rust on some of... Read more

Genuine Ge part

Kit-Mid Spray Arm Hub

5.0 (4)

By: Ge

Part Number: WD35X10055

Do-It-Yourself Stories from Customers like You Spray arms and bearings were worn screens were clogged and pump connectors were deteriorated and leaking Chris L. • Gorham , ME • March 14, 2017

I replaced the upper and mid spray arms and bearings, removed filters and screens and cleaned everything. Pulled pump and replaced the connector and the collection sump. Repair took about 3 hours and went very smoothly thanks to the AppliancePros video! I'm on the east coast so I could not believe it when the parts arrived less than 24 hours after I placed the order! Prices were great too . . . I'm a customer for life and my dishwasher cleans the dishes like new now! Read more

Genuine Ge part

Flapper Check Valve

4.9 (7)

By: Ge

Part Number: WD01X10177

Do-It-Yourself Stories from Customers like You Water would not drain out completely Danny D. • Hookstown , PA • January 18, 2016

The Piston and Nut assembly replaced Check Valve and Body and gasket replaced Read more

Genuine Ge part

Dishwasher Float Dome

5.0 (1)

By: Ge

Part Number: WD12X10119

Fix dishwasher overfilling or not filling properly by replacing the float dome. Snaps onto the float assembly to control water level. DIY repair.

Do-It-Yourself Stories from Customers like You Float in dishwasher Michael M. • Bronx , NY • September 12, 2021

Exact GE part, so perfect. Thank you! Read more

Genuine Ge part

Locknut

5.0 (1)

By: Ge

Part Number: WD12X10135

Do-It-Yourself Stories from Customers like You Leaking dishwasher. Jacob W. • Newberg , OR • April 07, 2020

I found the schematics on your site and took my best guess at the individual components that I should replace, related to the flood switch. I guessed correctly. Read more

Genuine Ge part

Dishwasher Display Board

5.0 (4)

By: Ge

Part Number: WD21X10255

This display control module manages the digital interface and electronic controls on your dishwasher's control panel. It processes cycle selections and displays status information during operation. Replace this board if the display is blank, shows error codes, buttons don't respond, or cycles won't start properly.

Do-It-Yourself Stories from Customers like You Dishwasher wouldn't cycle properly, would hang during washes Renae M. • Kettering , OH • April 20, 2021

I noticed something was wrong when the dishwasher no longer remembered the last cycle performed. After it finished, it would go to a default cycle. A couple of weeks ago, my husband said it wouldn't start. Then I noticed on subsequent washes, there was a high probability that it would hang at a random part of the wash cycle. I was able to reset it though. The last time it stuck was during the pre cycle, where it drains any water and runs the disposer. It hung there all night! I tried cycling... Read more

Genuine Ge part

Water Inlet Nut

5.0 (1)

By: Ge

Part Number: WD01X10220

Do-It-Yourself Stories from Customers like You Leaking water on the left side facing unit Gary S. • Lutherville , MD • April 05, 2020

Remove the unit. Unscrewed filler cup. Put on new part. FIXED PROBLEM. Read more

Genuine Ge part

Spray Arm Water Supply Tube

5.0 (5)

By: Ge

Part Number: WD12X10113

Do-It-Yourself Stories from Customers like You The dishwasher was severely covered with calcium and lime the glassware and silverware were coming out with a lot of spotting Peter G. • Niceville , FL • October 18, 2016

I used lime away, vinegar, finish washer cleaner none of them worked. Finally just use Brillo on the entire cabinet interior. It came out very clean. Only needed very light scrubbing. Then replaced the severely corroded filters Riser tube and upper jet which was not turning. After this the upper arm turned perfectly silverware and glassware and silverware came out rinse very clean. Will do preventative maintenance in the future. Dishwasher was about 5 years old GE Profile high-end Read more

Genuine Ge part

Lower Rack Comb (Assembly)

4.5 (2)

By: Ge

Part Number: WD28X10116

Replacement lower rack comb assembly restores proper spacing and support along the dishwasher's lower rack tines, helping keep plates and bowls upright for more consistent cleaning and preventing items from shifting or blocking spray. What it does:

Secures and spaces lower-rack tines to help keep dishes stable during the wash cycle
Prevents dishes and small items from tipping or sliding into the spray area
Replaces broken, cracked or missing combs that let dishes fall between tines
Helps maintain proper load alignment so spray arms can reach all items

What's included: One lower rack comb assembly. Install notes:

Remove the lower rack to access the damaged comb; replacement is performed at the rack level
Part typically attaches with clips or snaps to the tine row—align and press into place; refer to your model's service info
Always disconnect power to the appliance before doing any repairs and follow basic safety precautions

Do-It-Yourself Stories from Customers like You Rusty and deteriorating racks Ronald A. • Stayton , OR • October 24, 2019

Purchased new tine rows and clips, took 20 minutes to fix. I shouldn't have waited so long! Read more

Genuine Ge part

Grommet Heater

5.0 (2)

By: Ge

Part Number: WD01X10094

Do-It-Yourself Stories from Customers like You Leaking water Stephen M. • Vineland , NJ • April 19, 2021

This was not an obvious source of a leak. The Tower Heater Assembly Nut developed a crack over time due to heat exposure. So the leak was gradual slowly getting worse over time. It was a hairline crack that ran down one of the edges of the nut making it hard to see. In talking to a pro he said it isn't a common problem. It is all the way in the back of the bottom of the dishwasher so it is not something you can see without pulling the dishwasher out and running it. The repair itself is easy. I... Read more

Genuine Ge part

Seat Check Valve

By: Ge

Part Number: WD01X10176

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Zbd6890k0011 Parts

Flood Switch Seal (Dishwasher)

Tine Clip

Dishwasher Float

Dishwasher Upper Rack Inner Slide Rail

Middle Spray Arm Bracket

Dishwasher Vent Cover

Kit-Mid Spray Arm Hub

Flapper Check Valve

Dishwasher Float Dome

Locknut

Dishwasher Display Board

Water Inlet Nut

Spray Arm Water Supply Tube

Lower Rack Comb (Assembly)

Grommet Heater

Seat Check Valve

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Zbd6890k0011 Parts

We respect your privacy

Manage consent preferences