Need Help?
Call
This motor control board is created for use with washing machines. It's located inside the washing machine, where users can change settings and start or stop the appliance. It is tasked with regulating how quickly the washer spins during a cycle. Wear and tear or damage can cause the motor control board to malfunction. This may make it impossible for the washer to agitate or spin. If this happens, a replacement will need to be made.To replace this part, start by unplugging the appliance. Once the area is safe, the bottom front panel should be removed. This will provide access to the original motor control board. Pull on the motor control board until the wires can be reached. The position of these components should be noted before taking out the part. Replace with a new motor control board and replace the wires.This motor control board is designed to fit washing machines made by Maytag, Whirlpool, Kenmore, and KitchenAid. This is an authentic OEM replacement part that is sourced directly from the manufacturer. It's sold as a single part.
We started getting the F06 code when on the normal cycle it was time to Rinse/Spin, pointing to a speed/tachometer issue on the motor. After several attempts of unplugging from power and restarting the cycle it would eventually start working for the rest of the laundry session. The Whirlpool technician after a brief look on the underside determined it was the motor and had to be replaced, even tough all troubleshooting tests on the motor were ok. I insisted that the probability was much higher... Read more
Oven display blank or temperature not holding? This control board manages heating elements and temperature settings. Moderate DIY, 30-45 minutes.
Replaced board. Parts were as described... OEM replacement. Fast shipping. Wife got he range back in record time. Have protection plan with lowes. They said it would be 2 weeks before a service tack could come out and diagnose problem. Then more time to get part and install. So... did it myself! Read more
The Control Board is an OEM part for Bosch wall ovens. It serves as the main control center for the oven, managing and regulating all the functions, including temperature settings, cooking modes, timers, and the operation of the heating elements.
Causes of a bad Control Board can include electrical surges, wear and tear from prolonged use, exposure to heat, and moisture or grease buildup that can damage electronic components.
Symptoms of a bad Control Board include:
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
Replaced the main control board on a Thermador oven model POD301J/01 after we got an E115 error and the top broiler would come on no matter what setting you put it on and wouldn't turn off and would overheat. Took me about 30 mins total to replace after taking pics to make sure everything went back as it was. So far so good and it's working again! Read more
Fix a washer that won't start, has all lights on, or runs erratically. This electronic control board restores proper cycle control. Moderate difficulty.
Replace the Mainboard control and push the start button. Read more
Fix F99, F13 error codes, dead display, or non-working oven timer. This clock control board restores all timer and bake functions. DIY-friendly repair.
Replaced Oven Control Board. I already had removed the old part when I ordered the replacement. Part showed up in 48 hours. It took me about two minutes to install the new part. Tested to make sure it worked, then another 30 seconds to screw the back panel of the stove on. Read more
This electronic control board manages oven functions including temperature regulation, bake/broil cycles, and the clock display. It mounts behind the control panel and communicates with the oven's heating elements and sensors. Replace this board if the oven won't heat, displays error codes, has a blank or flickering display, or if the clock and timer stop working correctly.
Order the part from you all. Watched the video how to install, which was easy to understand. the part arrived A DAY EARLIER than we expected! How nice is that? and installed part, stove /oven works. everybody's happy. Read more
Fix a dishwasher that won't start, has no display lights, or beeps randomly. This control board manages all cycles and functions. DIY-friendly repair.
Replaced the control board. Read more
This is the main electronic control board that manages key refrigerator functions such as compressor operation, defrost cycles, fan motors, and temperature regulation. It is typically mounted on the back of the unit or behind an access panel inside the compartment. Replace this board if the refrigerator stops cooling, runs constantly, displays error codes, or if individual components like the compressor or fans fail to turn on despite being functional.
Walk into the kitchen on 21 Sep. Eight year old Frigidaire refrigerator appears to be short cycling, controls are nonfunctional. Unplug it for a few minutes, plug it back in, appears to return to normal function. Return to kitchen half hour 45 minutes later it's short cycling again. Panel has codes on it (S or 5 E CE, later that changes to S or 5 Y CE). Research of codes says replace main board and control board. Not sure where this main board is. 22 Sep call appliance repair. "Soonest... Read more
Dryer won't start or console unresponsive? This electronic control board manages all dryer functions including cycles, temperature, and sensors.
Tried replacing the thermal fuse with no luck. Replaced the control board now dryer works. Read more
The User Control and Display Board is an OEM part for Frigidaire refrigerators. This part provides the interface for setting temperatures and controlling various functions of the refrigerator, displaying information like temperature settings, and error codes.
Common causes of a bad control and display board include electrical surges, wear and tear of electronic components, or damage from moisture or heat exposure.
Symptoms of a bad User Control and Display Board include:
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Ordered this temperature control board, which was the correct part, but my original part was affixed to a frame with glue and attached to the control display via adhesive (taped to the control display face). Trying to remove the old control board was stretching and tearing the control display face so I was not able to install the replacement. No error on part of the company. The part was shipped the same day I placed the order (@2pm) and it arrived the vert next day. That’s freaking... Read more
Fix a refrigerator that won't cool, has no interior lights, or unresponsive control panel. This main control board manages temperature and cooling functions.
Ice maker stopped making ice or won't turn off? This ice level control board monitors bin levels to control ice production. Simple DIY repair.
Bought new optic control boards, both the emitter and the receiver. The repair process was so simple. The KitchenAid repair tech came out to diagnose our issue. He was only going to come back and install a new emitter. They wanted a lot of money to do the repair. They were going to charge us $257 just for the part (emitter board). We bought both boards for $300 from AppliancePartsPros. We decided to replace both boards, because if one went bad the other might not be far behind. Read more
Fix dishwasher lights flashing or cycles stopping mid-wash with a new electronic control board. Controls all dishwasher functions. Easier install than expected.
Replaced the control board. It was easier than I thought it would be. Read more
Fix a refrigerator that won't defrost, freezes food, or has temperature control issues. This electronic control board regulates compressor and fan operation.
Let you know when it gets installed Read more
Fix F11 error codes, blank displays, or non-responsive controls with this electric range electronic control board. Moderate DIY repair in 1-2 hours.
You were right on with your evaluation. I Replaced the board, and we seem to be like new. Thanks Read more
Fix dishwasher buttons not responding or flashing lights with this control panel interface. Restores cycle selection when touchpad fails or stops working.
Replaced key pad and module Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.