Hardware Hand Small Engine Fuel Cap Parts
Genuine Ge part
By: Ge
Part Number: WE1M1007
This fuse terminal cover shields and insulates the fuse connection inside your appliance, helping prevent accidental contact and shorting. Replace a cracked or missing cover to maintain safe electrical protection and dependable circuit performance.
- Covers and insulates the fuse terminals to protect the connection
- Helps prevent accidental contact, arcing, and debris intrusion at the fuse
- Common signs you need this part: missing cover, cracks, heat discoloration, or a cover that won't stay secured
- Promotes a secure, consistent fuse connection once installed
What's included: 1 fuse terminal cover Installation notes:
- Disconnect power at the breaker or unplug the appliance before servicing
- Access the fuse area per your service information; note wiring and cover orientation
- Remove the damaged cover; inspect terminals and wiring for heat damage or looseness
- Seat the new cover fully and verify it is secure and clear of wiring
More
Genuine Ge part
By: Ge
Part Number: WR01X21159
Reversible door plug fills unused mounting holes when switching refrigerator door swing direction. Replaces broken or missing plugs for a finished look.
More
Genuine Bosch part
By: Bosch
Part Number: 00415278
Keep your appliance's controls working reliably with this switch cover. It mounts over a switch to hold it in place and shield it from damage, helping ensure consistent actuation and long service life.
- Retains and protects a control/interlock switch within its housing
- Helps keep the switch aligned for reliable on/off detection
- Shields the switch from dust and incidental contact
- Cracked, loose, or missing cover can cause intermittent operation or no response when the control is pressed
What's included: 1 switch cover Install notes:
- Disconnect power to the appliance before servicing
- Remove the necessary panel to access the switch; note wire positions/orientation
- Transfer any clips/screws from the old cover and seat the switch fully
- Secure wiring away from pinch points before reassembly
Do-It-Yourself Stories from Customers like You
Loose hood switch Brett O. • San Francisco , CA • July 03, 2015
I took apart the hood cover and noticed that the cover switch had broken away from the screw. I researched the part on this website and identified the correct part, ordered it, and replaced the part. It was challenging as the angles were awkward when I was working under the hood, but I took my time and only needed a screw driver. I'm sure I saved hundreds of dollars doing this repair myself rather than calling in a professional.
Read more
More
Genuine Bosch part
By: Bosch
Part Number: 00445427
This is a cover lid for the storage compartment on a dryer. It protects the storage area and keeps it enclosed when not in use. Replace this part if the lid is cracked, broken, missing, or no longer stays securely in place.
Do-It-Yourself Stories from Customers like You
Bosch 00445427 cover tab broke Numsen H. • Houston , TX • December 19, 2017
Easy fix. Slid old open door sideways to remove and reinstalled the new one in the same fashion.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 814103
This metal clip secures and stabilizes surface burner components on gas cooktops. It prevents burner parts from shifting during cooking and ensures proper alignment for safe gas flow. Install this clip if burner grates move during cooking, flames appear uneven, or burner parts seem loose or misaligned.
Do-It-Yourself Stories from Customers like You
Two fo the burner retaining clips had broken and one of the burners was malfunctioning Michael G. • Renton , WA • December 05, 2015
It went very easily. The two original clips were riveted in the top but a small drill bit cut the last of the rivit free and the clips remainders just fell out. There was no damage to the stop top. The butner simply snaps in to its socket so that was easy to replace. Pulled the old one out and put in the new one.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10572852
Fixes food freezing in fridge and popping/tapping noises from damper. Restores proper airflow between freezer and fresh food sections. 5-15 minute repair.
Do-It-Yourself Stories from Customers like You
Freezing on top shelf of fridge John W. • Mullica Hill , NJ • February 02, 2015
Replaced diffuser. Original damper drive was broken. Repaced with this upgrade design which channels the air flow differently preventing "freeze up". Job required 15 min.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10905013
This assembly includes the housing and door that enclose the lint screen filter compartment on the top or front of the dryer. It provides access to the lint filter for cleaning and keeps the filter securely in place during operation. Replace this part if the door is cracked, broken, won't stay closed, or if the housing is damaged and no longer holds the lint screen properly.
Do-It-Yourself Stories from Customers like You
Lint screen door was broken on inside Scott P. • West Haven , CT • January 31, 2015
Open dryer door. Remove four Phillip head screws that hold lint assembly together. Two inside and two on the outside. There is also a hex head screw behind the front panel. To get at it I removed the four hex heads at bottom of front panel and four star head screws on left side of front panel. I was able to get at it by pulling the front panel out as much as possible and and reaching from the side with small quarter inch socket. Remove lint assembly, vacuum out everything and replace with new...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 285550
Missing or cracked cap letting water into the agitator? This protective cover seals openings and fasteners, preventing leaks and debris buildup. Easy DIY fix.
More
Genuine Ge part
By: Ge
Part Number: WB1K5157
Hex washer head screw secures oven panels, brackets, and door handles. Replace missing, stripped, or damaged screws to eliminate looseness and rattling.
Do-It-Yourself Stories from Customers like You
Door handles were missing Dianne T. • Tacoma , WA • December 03, 2017
It was very easy!. Just removed the screws off the trim plate and access was right there. The double oven was given to me but the handles were missing and the end caps so I just had to replace them.
Read more
More
Genuine Lg part
By: Lg
Part Number: 5006JA2069A
The Cap Cover is an OEM part for LG refrigerators. This cover is designed to protect and secure various components within the refrigerator, such as the water filter or other internal mechanisms. Its role is to ensure that these components are shielded from debris, moisture, and potential damage, maintaining the overall efficiency and cleanliness of the appliance.
Causes of a bad cap cover can include wear and tear over time, cracks or breaks from accidental impacts, or warping due to exposure to temperature fluctuations. Misalignment or improper installation can also contribute to the cap cover becoming damaged or ineffective.
Symptoms of a bad cap cover include:
- Loose or missing cover
- Visible cracks or damage on the cover
- Debris or moisture accumulating in areas meant to be protected
- Misalignment or difficulty in securing the cover properly
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Broken freezer bin. Leslie W. • Depew , NY • March 11, 2022
Order your parts and they were installed that day. Parts were very reasonable price, but I thought shipping with excessive for the size parts sent.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP902899
Soap or rinse aid dispenser not opening? This wax motor actuates the dispenser door release. DIYers report 15-30 minute repairs with basic tools.
This part fixes the following symptoms
-
Will not dispense detergent
See more...
Do-It-Yourself Stories from Customers like You
Soap tray on dishwasher did not open during the wash cycle Michael H. • Marietta , GA • February 15, 2015
I found the videos on dishwasher repair that AppliancePartsPros offers and determined the likely cause of the problem. I removed the door cover and found soap caked on the back. I cleaned the cover and switched the wax motors to see if the clean rinse motor was good and ran a tested cycle. No improvement. I ordered two new wax motors for the Maytag dishwasher and those arrived in a few days from AppliancePartsPros. I replaced the old motors and ran a test cycle. The soap tray opened correctly....
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 316001009
Secures the oven door handle to the door or front panel. Replace if your screw is stripped, missing, or damaged to restore a firm grip and proper alignment.
Do-It-Yourself Stories from Customers like You
Renter broke the handle off the oven Brian W. • Brunswick , GA • November 16, 2014
Who does that? I've lived in my house for many years and never have done the damage that a renter can do in just 1 year. Looked up the Serial number and found the parts I needed easily. Ordered them and they arrived in about 3 days. Fit perfectly.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2186494W
White plastic cap that secures the water filter in place. Replace if cracked, broken, or missing to properly hold your refrigerator's filter cartridge.
Do-It-Yourself Stories from Customers like You
Light switch Truman P. • Athens , AL • December 15, 2015
Replaced with new one from your website. I love the website because it shows you how to fix your problem before you get started. I
Read more
More
Genuine Ge part
By: Ge
Part Number: WR17X12323
White rear motor cover for refrigerator. Shields motor and fan area at back of compartment. Replace if cracked, broken, or missing to protect components.
Do-It-Yourself Stories from Customers like You
Plastic piece broke in ice maker. Tina S. • Jacksonville , FL • November 09, 2018
Pictures on website were great. I ordered the part needed. Very easy to replace.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB06X10764
This molded resin cover is a protective plastic shield used inside the microwave. It helps protect internal components and ducting from splatter and debris and restores a secure, finished fit when the original cover is cracked or missing. What it does:
- Shields internal components from grease, steam, and food splatter inside the unit
- Helps maintain proper airflow paths and a snug, rattle-free fit
- Common replacement when the original cover is cracked, warped, loose, or missing
- Visual cue: exposed internal parts or a cover that won't stay secured
What's included:
- One resin (plastic) cover
Install notes:
- Disconnect power (unplug or switch off the breaker) and allow the unit to cool
- Access the cover location; remove retaining screws/clips and keep hardware for reuse
- Align the new cover and secure it without overtightening
- Ensure the cover is fully seated and not contacting nearby moving parts before restoring power
Do-It-Yourself Stories from Customers like You
Microwave arcing Peggy S. • Jefferson City , MO • December 21, 2014
After researching on the internet, I decided replacing the wave guide cover would be much cheaper than replacing the microwave. Plus I couldn't even find one that worked with the existing trim kit. Had a bit of difficulty removing the old cover, but the folks at Appliance Parts Pro answered my email question within 24 hours. I received the replacement part a day or so later. GREAT CUSTOMER SERVICE! Thanks!
Read more
More
Genuine Ge part
By: Ge
Part Number: WE1M1102
Protective cover that shields the rear power connection terminals on your dryer. Replace if cracked, broken, or missing to prevent lint buildup and accidental contact with electrical connections.
Do-It-Yourself Stories from Customers like You
Squeaks slow drying Laurence S. • Orlando , FL • July 22, 2019
Cleaned and lubricated the motor and the small drum bearing, replaced the upper front bearing mount, slide pads and lower felt bearing pad and the light bulb.
Read more
More