Hardware Hand Small Engine Safety Switch Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10777162
The Screw is an OEM part for Whirlpool ranges. This screw is used to secure various components within the range, ensuring that parts such as panels, control boards, or burners are firmly attached and remain stable during operation.
Causes of a bad range screw can include regular wear and tear, over-tightening, or exposure to high heat.
Symptoms of a bad range screw include:
- Loose or unstable components within the range
- Difficulty in securing parts during maintenance or repair
- Visible damage or wear on the screw
- Parts becoming misaligned or rattling during operation
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Left door hinge would not allow door to close square to opening Jay R. • Clearwater , FL • October 19, 2019
Replaced the hinge receiver with a new one. The old one was bent slightly inside where it could not be seen. I think someone pushed the door down to far or fell on it. 2 screws to remove it, take out storage drawer and reach up little ways to remove and replace the receiver. Replace the 2 screws. The receiver comes with 2 screws but I ordered an extra ( never used it ). The sides of the receiver were spread just a tiny bit but were enough to cause a problem.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB18X23942
If your gas cooktop burners won't ignite or igniters click continuously, the switch harness may be faulty. Moderate DIY repair with basic tools.
Do-It-Yourself Stories from Customers like You
No spark or red led gas cooktop working with a lighter. Devang R. • San Ramon , CA • June 23, 2022
The ordeal began after wiping around burner knobs with a moist paper towel with cleaner and wrapping the towel around the burner knob shaft to clean around it. The cooktop stopped sparking on all the 5 burners and no red LED light. There was gas flow and I could light the burner using a lighter. I looked up and found a couple of good youtube videos on troubleshooting and also came upon the AppliancePartsPros.com site. I opened the cooktop (youtube video helped) after turning off the gas supply...
Read more
More
Genuine Ge part
By: Ge
Part Number: WE4X782
Fix a dryer that won't start or has a broken start knob. This rotary start switch is located in the control panel. Easy 5-10 minute DIY repair.
Do-It-Yourself Stories from Customers like You
Dryer knob broke 8 years ago post finally wore down so it could not be turned with pliers Patrick H. • Saint Albans , VT • December 29, 2014
Ordered parts arrived in two days. Ten minute fix with one wrench. Should have done it years ago.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134399700
The Start Switch is an OEM replacement part for Frigidaire dryers. This part initiates the dryer's cycle once the user selects the desired settings. By pressing the start switch, the motor activates, and the drying process begins, ensuring clothes are dried according to the selected specifications.
Symptoms of a bad Start Switch include:
- The dryer not starting when the switch is pressed
- Intermittent starting issues, where the dryer sometimes starts and sometimes doesn’t
- The need to hold the switch in place to keep the dryer running
- Unusual noises when the switch is pressed
Causes for a malfunctioning Start Switch can include electrical issues, such as faulty wiring or connections, wear and tear from frequent use, or internal failures within the switch mechanism that prevent it from signaling the motor to start.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dryers.
Do-It-Yourself Stories from Customers like You
Start switch knob broke off. Jeff O. • Laurier , WA • March 07, 2018
I went online, ordered the part and installed it,,, took 15 minutes to install,,,saved huge $$$
easy peasy!! :-)
Read more
More
Genuine Ge part
By: Ge
Part Number: WB24X10205
Microwave tripping breaker when door opens or at startup? A failed monitor switch with welded contacts is the likely cause. 30-minute DIY repair.
Do-It-Yourself Stories from Customers like You
Stopped working tripped breaker Roberto M. • Pembroke Pines , FL • March 08, 2019
By replacing the switches.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 318293827
Burner won't turn on or heat properly? This range burner control switch restores heat level adjustment. Moderate DIY with wiring terminal labels.
Do-It-Yourself Stories from Customers like You
Large burners would go to high when turned on Charles H. • Prestonsburg , KY • October 25, 2016
Replaced infinite switch on large burners and just went ahead and replaced the infinite switch on the small burners while I had it apart and installed all new surface elements as well...parts were shipped the next day and I received them within 2 days...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10487697
Fixes intermittent or erratic speed control on stand mixers. This electronic board regulates motor power for accurate, steady speeds across all settings.
Do-It-Yourself Stories from Customers like You
Intermittent speed control on kitchenaid 7qt stand mixer Anthony C. • Westminster , CO • November 26, 2014
Unplug the unit from power.
Remove decorative aluminum band from motor enclosure by removing single screw at rear of mixer.
Remove screws (now exposed) which secure the top half of the motor enclosure.
Using a 1/8" punch, tap-out the pin that penetrates the planetary gear cover and the motor shaft (takes some finesse to avoid damage to the painted/coated planetary. It is a tight fit!) This will allow the planetary gear and cover to drop.
Now the motor and gear unit can be removed. Do so...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10335056
Washer not filling properly or overfilling? A faulty water level pressure switch fails to signal correct fill levels. DIY repair in about 1 hour.
This part fixes the following symptoms
-
Will not stop filling with water
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
Washing machine wouldn't fill water to the correct level it filled as if it were set to "small load" every time Jessica A. • Baltimore , MD • April 13, 2014
I took the washer apart and replaced the water level switch and hose with new ones. I followed the video that I found on youtube (which is on the site) and had no problems at all.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB23K5027
Burner won't stay at set temperature or jumps to high? The infinite switch controls power to heating elements. Easy DIY repair, takes under 30 minutes.
Do-It-Yourself Stories from Customers like You
Had no control over burner temp Thomas M. • Country Club , MO • January 21, 2017
Replaced control Element.
This took less then 30 min and I am no pro(first time to do this repair).
Read more
More
Genuine Bosch part
By: Bosch
Part Number: 00611665
Dishwasher overflowing or not filling properly? The float switch monitors water levels and prevents overflow. Watch our video for step-by-step help.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10339326
Fix a washer that overfills, won't fill enough, or stops filling mid-cycle. This water level pressure switch regulates tub fill. DIY repair in 30 minutes.
This part fixes the following symptoms
-
Will not stop filling with water
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
Washing machine would not agitate and would not fill water Jennifer B. • Kingston , NH • March 13, 2016
At first, I thought, maybe I should just get a new washing machine. After all, it is almost 20 years old! I couldn't bring myself to do that and said to myself, let me see if I can figure out what parts I need and see if I can find a video that tells me how to do it and see how hard it is. I’ve never attempted appliance repair before. After figuring out what the most likely parts were, I ordered the water level switch and agitator cam repair kit - I figured for $10 more, I might as well...
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 241554901
Refrigerator interior light won't turn on or stays on? This door light switch controls your fridge lighting. Quick DIY fix with basic tools.
Do-It-Yourself Stories from Customers like You
Light in refrigerator quit working Joseph S. • Wapakoneta , OH • June 27, 2014
Ordered switch....turned out it was the socket that was bad...ordered socket.....quick install....light works
Read more
More
Genuine Ge part
By: Ge
Part Number: WH12X10476
Fix washer overfilling or not filling properly. This pressure switch controls water level for proper washing. DIY-friendly, takes about 5-10 minutes.
Do-It-Yourself Stories from Customers like You
Washer was leaking water Jerry M. • Mansfield , TX • June 06, 2014
I thought initially it was a hose because it was leaking water from the bottom. On the small and medium load it didn't leak. I watched it on the large setting and noticed the water didn't shut off initially so therefore it was over filling. I ordered a switch pressure switch from Appliance Parts Pros and received it in two days. I replaced the switch, put the washer together and now it works like new. The wife is very happy to have her washer back working better than ever! Thanks!
Jerry
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11123943
Ice maker not working or won't dispense? This ice bin safety switch detects when the bin is in place to activate your ice maker. Easy DIY fix.
Do-It-Yourself Stories from Customers like You
The refrigerator would not make ice or dispense water or ice. Ken W. • Aurora , CO • June 15, 2022
Part easily replaced and problem was solved. Saved service call.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11316246
Fix a washer that overfills or won't fill properly with a water level pressure switch. Monitors water levels during wash cycles. DIY repair.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 297243800
This door-activated light switch controls the interior lamp in your refrigerator or freezer. Replace it to restore dependable on/off lighting when the door opens and closes and prevent a light that stays on and warms the compartment.
- Activates the interior light when the door opens and switches it off when closed
- Helps resolve no interior light, light staying on, or a broken/stuck switch plunger
- Restores reliable visibility inside the compartment
- Direct replacement for the original switch connection
What's included: One light switch Install notes:
- Disconnect power before servicing
- Release the switch from the liner and gently pull it out
- Transfer wires to the new switch one at a time to maintain correct connections
- Seat the switch flush; restore power and verify the light turns off when the door closes
Do-It-Yourself Stories from Customers like You
Bad door switch prevented light from working when opening door Thomas C. • Sarasota , FL • October 05, 2014
Ordered light switch and it arrived the following day with standard shipping! That was FAST!!
Removed old swich, installed new, only 2 wire switch, very easy.
I was very impressed with the 1 day delivery
Read more
More