Lower Small Engine Safety Switch Parts
Genuine Ge part
By: Ge
Part Number: WB23K5027
Burner won't stay at set temperature or jumps to high? The infinite switch controls power to heating elements. Easy DIY repair, takes under 30 minutes.
Do-It-Yourself Stories from Customers like You
Heat plate shorted and blew switch Joseph B. • Hillsdale , NJ • September 29, 2014
Swapped old with new. dead easy and fast delivery of part helped:
good service, thank you .
Read more
More
$108.95
- Compare At:
-
$129.65
- You Save:
-
$20.70
Genuine Ge part
By: Ge
Part Number: WH12X10476
Fix washer overfilling or not filling properly. This pressure switch controls water level for proper washing. DIY-friendly, takes about 5-10 minutes.
Do-It-Yourself Stories from Customers like You
Washer was leaking water Jerry M. • Mansfield , TX • June 06, 2014
I thought initially it was a hose because it was leaking water from the bottom. On the small and medium load it didn't leak. I watched it on the large setting and noticed the water didn't shut off initially so therefore it was over filling. I ordered a switch pressure switch from Appliance Parts Pros and received it in two days. I replaced the switch, put the washer together and now it works like new. The wife is very happy to have her washer back working better than ever! Thanks!
Jerry
Read more
More
$47.95
- Compare At:
-
$57.06
- You Save:
-
$9.11
Genuine Bosch part
By: Bosch
Part Number: 00611665
Dishwasher overflowing or not filling properly? The float switch monitors water levels and prevents overflow. Watch our video for step-by-step help.
More
$14.95
- Compare At:
-
$17.94
- You Save:
-
$2.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10415587
This switch monitors water levels in the washing machine tub and signals when the correct amount has been reached. Located near the control panel or top of the washer, connected to a pressure tube. Replace when the washer overfills, underfills, or won't start filling with water.
Do-It-Yourself Stories from Customers like You
Whirlpool washer has a f35 code (analog pressure sensor) Paul M. • Carlisle , PA • June 13, 2014
I was searching the web for solutions and came across two folks who had similar trouble code. One fixed his by removing the pump strainer from the pump to find coins blocking water flow, thus the analog water pressure sensor provided a failure response. My issue was solved by following the other hints I got. I ordered a new sensor (switch). It was expensive for what it is, but the washer will not run correctly without it! The part arrived in a very timely manner, and it was the right part....
Read more
More
$229.61
- Compare At:
-
$273.24
- You Save:
-
$43.63
Genuine Speed Queen part
By: Speed Queen
Part Number: D512973
This is a push button door switch that detects whether the dryer door is open or closed. It signals the control board to start or stop the drum motor when the door is shut or opened. Replace this switch if the dryer does not start when the door is closed, runs with the door open, or intermittently stops mid-cycle.
More
$12.58
- Compare At:
-
$14.97
- You Save:
-
$2.39
Genuine Whirlpool part
By: Whirlpool
Part Number: W10339326
Fix a washer that overfills, won't fill enough, or stops filling mid-cycle. This water level pressure switch regulates tub fill. DIY repair in 30 minutes.
This part fixes the following symptoms
-
Will not stop filling with water
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
Washing machine would not agitate and would not fill water Jennifer B. • Kingston , NH • March 13, 2016
At first, I thought, maybe I should just get a new washing machine. After all, it is almost 20 years old! I couldn't bring myself to do that and said to myself, let me see if I can figure out what parts I need and see if I can find a video that tells me how to do it and see how hard it is. I’ve never attempted appliance repair before. After figuring out what the most likely parts were, I ordered the water level switch and agitator cam repair kit - I figured for $10 more, I might as well...
Read more
More
$69.95
- Compare At:
-
$83.94
- You Save:
-
$13.99
Genuine Frigidaire part
By: Frigidaire
Part Number: 297243800
This door-activated light switch controls the interior lamp in your refrigerator or freezer. Replace it to restore dependable on/off lighting when the door opens and closes and prevent a light that stays on and warms the compartment.
- Activates the interior light when the door opens and switches it off when closed
- Helps resolve no interior light, light staying on, or a broken/stuck switch plunger
- Restores reliable visibility inside the compartment
- Direct replacement for the original switch connection
What's included: One light switch Install notes:
- Disconnect power before servicing
- Release the switch from the liner and gently pull it out
- Transfer wires to the new switch one at a time to maintain correct connections
- Seat the switch flush; restore power and verify the light turns off when the door closes
Do-It-Yourself Stories from Customers like You
Bad door switch prevented light from working when opening door Thomas C. • Sarasota , FL • October 05, 2014
Ordered light switch and it arrived the following day with standard shipping! That was FAST!!
Removed old swich, installed new, only 2 wire switch, very easy.
I was very impressed with the 1 day delivery
Read more
More
$29.95
- Compare At:
-
$35.64
- You Save:
-
$5.69
Genuine Ge part
By: Ge
Part Number: WH12X10479
Fix a washer that won't fill properly or overfills with this water level pressure switch. Common when load size selector fails. 20-minute repair.
Do-It-Yourself Stories from Customers like You
Water level pressure switch failed Larry P. • Colorado Springs , CO • November 13, 2015
Removed fill level pressure switch knob. Removed three screws from the back of the control panel.Opened the control panel and removed electrical connector and plastic tube from the pressure switch. Removed and replaced pressure switch. Placed control panel to correct position and replaced the three screws.
Read more
More
$54.49
- Compare At:
-
$64.84
- You Save:
-
$10.35
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10487697
Fixes intermittent or erratic speed control on stand mixers. This electronic board regulates motor power for accurate, steady speeds across all settings.
Do-It-Yourself Stories from Customers like You
Intermittent speed control on kitchenaid 7qt stand mixer Anthony C. • Westminster , CO • November 26, 2014
Unplug the unit from power.
Remove decorative aluminum band from motor enclosure by removing single screw at rear of mixer.
Remove screws (now exposed) which secure the top half of the motor enclosure.
Using a 1/8" punch, tap-out the pin that penetrates the planetary gear cover and the motor shaft (takes some finesse to avoid damage to the painted/coated planetary. It is a tight fit!) This will allow the planetary gear and cover to drop.
Now the motor and gear unit can be removed. Do so...
Read more
More
$135.62
- Compare At:
-
$161.39
- You Save:
-
$25.77
Genuine Whirlpool part
By: Whirlpool
Part Number: W11291138
Refrigerator light won't turn on or off when opening the door? This door light switch controls interior lighting. DIY repair in under 10 minutes.
Do-It-Yourself Stories from Customers like You
Interior light on refrigerator was flashing Billy R. • Reedsport , OR • February 28, 2020
Replaced light switch. That did not work, problem was in led lights.
Read more
More
$28.43
- Compare At:
-
$34.12
- You Save:
-
$5.69
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10391743
Fix burners stuck on high heat or won't adjust temperature with this infinite switch. Common issue with multi-ring burners. Easy DIY repair in under 30 minutes.
Do-It-Yourself Stories from Customers like You
Front two burners were heating out of control Garrey P. • Rogers , TX • December 11, 2018
Replaced two switches that controlled two front burners. One controlled three different burner sizes options in one burner. The other was the speed burner, basically three different burner options in one burner.
Read more
More
$89.31
- Compare At:
-
$107.17
- You Save:
-
$17.86
Genuine Whirlpool part
By: Whirlpool
Part Number: W11123943
Ice maker not working or won't dispense? This ice bin safety switch detects when the bin is in place to activate your ice maker. Easy DIY fix.
Do-It-Yourself Stories from Customers like You
The refrigerator would not make ice or dispense water or ice. Ken W. • Aurora , CO • June 15, 2022
Part easily replaced and problem was solved. Saved service call.
Read more
More
$28.43
- Compare At:
-
$33.83
- You Save:
-
$5.40
Genuine Whirlpool part
By: Whirlpool
Part Number: W11316246
Fix a washer that overfills or won't fill properly with a water level pressure switch. Monitors water levels during wash cycles. DIY repair.
More
$80.95
- Compare At:
-
$97.14
- You Save:
-
$16.19
Genuine Bosch part
By: Bosch
Part Number: 00189968
The Vent Switch is an OEM replacement part for Bosch range hoods. It is an electronic control device located inside the range hood that regulates the internal vent and fan functions.
Causes of a faulty vent switch can include long-term use in high-heat cooking environments, damage from accidental spills or impacts, or normal component degradation over time.
Symptoms include:
- Failure of the fan or vents to engage during cooking
- Variable or inconsistent fan speeds that don't adequately vent smoke
- Electrical shorting or sparking noises from within the hood control unit
This genuine Bosch replacement part is also compatible with Thermador, Gaggenau, and some Kenmore range hood models.
Do-It-Yourself Stories from Customers like You
Thermador cvs36r cook'n'vent vent won't go down Martha M. • Los Altos , CA • January 17, 2015
I replaced the switch
Read more
More
$132.31
- Compare At:
-
$157.45
- You Save:
-
$25.14
Genuine Whirlpool part
By: Whirlpool
Part Number: W10335056
Washer not filling properly or overfilling? A faulty water level pressure switch fails to signal correct fill levels. DIY repair in about 1 hour.
This part fixes the following symptoms
-
Will not stop filling with water
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
Washing machine wouldn't fill water to the correct level it filled as if it were set to "small load" every time Jessica A. • Baltimore , MD • April 13, 2014
I took the washer apart and replaced the water level switch and hose with new ones. I followed the video that I found on youtube (which is on the site) and had no problems at all.
Read more
More
$62.46
- Compare At:
-
$73.70
- You Save:
-
$11.24
Genuine Whirlpool part
By: Whirlpool
Part Number: W10337781
The Water Level Switch is an OEM replacement part for Whirlpool washing machines. It monitors and controls the amount of water that fills the drum during each wash cycle. By ensuring the appropriate water level, it aids in the efficient and effective cleaning of laundry while conserving water.
Symptoms of a bad Water Level Switch include:
- The washing machine overfilling or underfilling with water
- Inconsistent or erratic water levels during cycles
- The machine failed to progress from filling water to the wash cycle
- Error codes or indicators related to water levels or filling
Causes for a malfunctioning Water Level Switch can include electrical issues affecting signal transmission, mechanical failures within the switch, or blockages in the pressure hose connected to the switch.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Water level of washing machine was stuck on extra small Stuart D. • Burke , VA • April 13, 2014
I replaced the assembly behind the water level knob.
I watched the video on appliancepartspros.com before starting, and then watched it again in short portions while going thru the repair process.
Read more
More
$118.53
- Compare At:
-
$141.05
- You Save:
-
$22.52