Power Strike Small Engine Spark Plug Parts
Genuine Ge part
By: Ge
Part Number: WE1X21975
Dryer won't start or run? A blown thermal fuse is often the cause. This safety part cuts power when overheating occurs. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Didn’t go on. Christina S. • Levittown , NY • February 16, 2018
The part I ordered fixed my problem
Read more
More
$30.49
- Compare At:
-
$36.59
- You Save:
-
$6.10
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3399849
Dryer won't heat or start? A blown thermal fuse is often the cause. This safety component is a simple DIY fix taking about 5-10 minutes to replace.
Do-It-Yourself Stories from Customers like You
Thermostat and thermofuse Britt A. • Concord , NC • February 16, 2015
Out with the old. In with the new. No problem. Dryers are simple and usually can be fixed quickly. appliance pros makes it easier with their tutorial videos and fast shipping!
Read more
More
$27.37
- Compare At:
-
$32.30
- You Save:
-
$4.93
Genuine Ge part
By: Ge
Part Number: WE4X448
The Flame Sensor is an OEM part for GE dryers. This part detects the presence of a flame in gas dryers, ensuring that the gas ignites properly for safe and efficient drying.
Causes of a bad flame sensor can include regular wear and tear, carbon buildup from the gas flame, or electrical malfunctions.
Symptoms of a bad flame sensor include:
- The dryer not heating or taking longer to dry clothes
- The dryer shutting off unexpectedly during a cycle
- The igniter glowing but not igniting the gas
- Error codes related to heating or ignition issues
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
Dryer heating for only a short time then no heat at all David N. • Fairfax , CA • December 08, 2018
GE Gas Dryer Model DBVH512GF1WW began to heat for only a short amount of time so drying clothes took WAY too long. Read online that the first thing to replace are the solenoids. Bought the two solenoids from AppliancePartsPros.com for about $50 total, and it seems to have fixed the problem. Had to watch a few videos to learn to disassemble the dryer, and the job took a couple of hours, but now that I know what I'm doing it could be done in less than 30 minutes.
Also, the old solenoids tested...
Read more
More
$79.95
- Compare At:
-
$95.94
- You Save:
-
$15.99
Genuine Ge part
By: Ge
Part Number: WH10X10008
Washer won't start or door won't lock? This door lock motor and switch assembly fixes both issues. Moderate DIY repair requires removing screws and gasket.
Do-It-Yourself Stories from Customers like You
Wash cycle would not start faint click instead of normal door lock sound Jeff N. • Charlotte , NC • August 16, 2019
Replaced door lock. It required removing the two screws around the lock, pulling the spring hoop wire from around the door gasket, and then disconnecting the two wire terminals from the lock. Reverse with the new part.
After cracking open the old lock the failure was caused by a thin plastic tab breaking off.
I also bought the door switch since it's cheap - just in case the problem was not the lock. But the door lock was the fix.
Read more
More
$167.95
- Compare At:
-
$198.18
- You Save:
-
$30.23
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10224430
The Dispenser is an OEM part for Whirlpool dishwashers, integral to the appliance's operation by dispensing detergent and rinse aid during the wash cycle. This component ensures that the right amount of cleaning agent is released at the correct time, contributing significantly to the effectiveness of each wash.
Causes of dispenser failure include cracked internal components from repeated door openings, mineral buildup clogging dispenser parts, or electrical malfunctions preventing dispensing functions.
Symptoms of a malfunctioning dispenser include:
- Detergent not being released during the cycle
- Rinse aid leakage or inconsistent dispensing
- The dispenser door sticking or failing to open
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
My dishwasher detergent dispensor door was not opening during wash cycle and the control panel was loose because the plastic mounts for the screws were broken Reed W. • Eldon , MO • November 11, 2014
I ordered a new detergent dispenser and control assembly, watched a few videos on you tube and dived in. The repairs were pretty simple once I got started and while I was doing this I went the extra step and cleaned out the drain. I would suggest doing this annually. Pretty simple to do and only 5 screws to get to the drain and the grinder. I found plastic and several other things that would not allow the dishwasher to drain properly and probably part of the problem of dishes not getting...
Read more
More
$140.95
- Compare At:
-
$166.32
- You Save:
-
$25.37
Genuine Whirlpool part
By: Whirlpool
Part Number: 8193882
Dishwasher won't start or door won't stay closed? The door latch bracket secures the latch mechanism for proper door closure. 30-45 min DIY repair.
Do-It-Yourself Stories from Customers like You
Replaced door latch parts. Michelle S. • Olmsted Twp , OH • September 05, 2017
Our 7 y/o dishwasher wouldn't close and therefore we couldn't get it to run. I called several service places who charged $75-$90 diagnostic plus parts & labor, and they were not able to get here for at least a week. I knew it was going to run at least $200. Kitchenaid wanted > $400 for a 1 YEAR WARRANTY, but it would cover this service call and any more throughout the next year. Seemed a little steep given the unit is already 7 y/o. I watched a couple videos on this site and YouTube and...
Read more
More
$57.39
- Compare At:
-
$68.29
- You Save:
-
$10.90
Genuine Whirlpool part
By: Whirlpool
Part Number: W11513250
The Washer Lid Strike is an OEM part for Whirlpool washing machines. It is a metal bracket that secures the washer lid in a closed position during cycles. The lid strike has a spring-loaded arm that catches the lid tab, providing a tight seal and secure closure.
Causes of a bad lid strike can include normal wear and tear over many cycles, damage from repeated impact or mishandling of the lid, or deterioration of components like the springs.
Symptoms of a defective lid strike include:
- The washer lid not latching properly or staying securely closed
- Water leaks around the lid seam
- Error codes related to the lid not locking
- Difficulty opening the lid fully after cycles
This OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washers.
Do-It-Yourself Stories from Customers like You
Maytag locking mechanism broke so machine would not function Sandra M P. • Rancho Palos Verdes , CA • August 16, 2026
We ordered a new locking mechanism, latch and cover, and followed the directions that we found on UTube.
Worked perfectly.
Read more
More
$10.71
- Compare At:
-
$12.85
- You Save:
-
$2.14
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303207102
Dryer door won't stay closed? The door strike secures the door latch during operation. Quick DIY fix—installs from the front in minutes.
Do-It-Yourself Stories from Customers like You
Frigidaire dryer door would not stay closed Carolina L. • Miami , FL • September 08, 2015
My dryer door would not stay shut because the door strike was stuck in the door catch. I was afraid that when I pulled the strike out, it would damage the catch, so I ordered the door strike and door catch.
I got the damaged door strike out with needle nosed pliers in about 15 seconds. The door catch was in perfect condition so I didn't need to use the one I ordered. So then I proceeded to install the new door strike. That took me about 15 minutes because I did not have the manual strength to...
Read more
More
$34.95
- Compare At:
-
$41.24
- You Save:
-
$6.29
Genuine Ge part
By: Ge
Part Number: WH01X20823
Fix a washer door that won't stay closed or latch properly with this door plunger. Resolves issues with doors opening mid-cycle or failing to lock securely.
More
$20.95
- Compare At:
-
$25.14
- You Save:
-
$4.19
Genuine Frigidaire part
By: Frigidaire
Part Number: 154388801
This is the cap that seals the rinse aid reservoir on the dishwasher door. It keeps rinse aid contained so it dispenses properly during the rinse cycle. Replace this cap if it is cracked, missing, or no longer seals tightly, which can cause rinse aid to leak out prematurely and result in spotty or poorly dried dishes.
Do-It-Yourself Stories from Customers like You
The dishwasher left by tenant with the cover panel loose on the left the door hyperextending a bit when opened. Marlena R. • Star City , IN • July 07, 2021
Took cover completely off and tried putting back, could not match up left screw with available screw hole. Tried many different configurations and sequences to make this happen. watched a video on changing the front panel, the door in it had four screws, mine 2, no help there. Searched on the hyperextending issue, found an article about dogs and kids [had both here] climbing on the door and to check the springs and linkages. Linkages intact both sides, R [opposite] side spring very stretched....
Read more
More
$37.62
- Compare At:
-
$44.77
- You Save:
-
$7.15
Genuine Speed Queen part
By: Speed Queen
Part Number: D504515
Dryer not heating or not getting hot enough? The cycling thermostat regulates temperature during the drying cycle. Moderate DIY repair for most users.
Do-It-Yourself Stories from Customers like You
Dryer problem no heat Judith T. • Suffield , CT • May 19, 2025
Replaced thermostat.
Read more
More
$37.95
- Compare At:
-
$45.54
- You Save:
-
$7.59
Genuine Ge part
By: Ge
Part Number: WH12X10276
Washer won't spin or agitate? A faulty lid switch magnet may be the cause. This part signals the switch that the lid is closed. Easy 20-minute DIY fix.
Do-It-Yourself Stories from Customers like You
Bad lid switch on a ge washer wouldn't agitate or spin David C. • Saline , MI • October 26, 2015
Replaced lid switch and lid magnet. Took just a little longer then 20 minutes as I had to splice in the new lid switch as it wasn't one that was a clip in, it was hard wired in.
Read more
More
$19.31
- Compare At:
-
$23.17
- You Save:
-
$3.86
Genuine Speed Queen part
By: Speed Queen
Part Number: D510177
Dryer won't start or stops mid-cycle? A worn door catch prevents secure latching. This assembly holds the door shut so your dryer runs. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Dryer door would not close, door catch was broken. Judy J. • Caledonia , MI • December 17, 2019
I called a local appliance store that gave us a replacement. That one broke after 1 week! The door was off balance. Tightened screws to realign. I found your store online and ordered the part. Arrived in 1 day! The part is much stronger than the first one. So far so good!
Read more
More
$7.77
- Compare At:
-
$9.32
- You Save:
-
$1.55
Genuine Whirlpool part
By: Whirlpool
Part Number: W11315637
Washer won't start or door won't unlock? This lock cam drives the door lock mechanism to secure and release the door for proper cycle operation.
Do-It-Yourself Stories from Customers like You
Door switch is broken Lan T. • Lawrence , MA • August 05, 2014
We have a corn-operation washer machine for my renter home that we took it over when we bough the property, When it broke we have no key. I order key as well as parts, and they come at no time. It is amazing, with the videos my husband was able to fix it, it save me a lot of money
Read more
More
$46.35
- Compare At:
-
$55.62
- You Save:
-
$9.27
Genuine Ge part
By: Ge
Part Number: WE4M216
Dryer won't heat, overheats, or shuts off mid-cycle? A faulty cycling thermostat often causes these issues. Easy DIY fix with our video guide.
Do-It-Yourself Stories from Customers like You
Intermittant heat. Raymond L. • Mebane , NC • March 18, 2014
Tested the old t-stat with ohm meter. When shaken, the contacts would open. Replaced it with new t-stat and it works fine now. Thanks!
Read more
More
$88.66
- Compare At:
-
$105.51
- You Save:
-
$16.85
Genuine Whirlpool part
By: Whirlpool
Part Number: 99002254
Fix a dishwasher that stops mid-cycle or won't start without holding the door closed. This latch assembly secures the door and activates switches.
This part fixes the following symptoms
-
Won't start
-
Door latch failure
See more...
Do-It-Yourself Stories from Customers like You
Dishwasher would not complete or start its cycle without applying constant pressure to the door Wayne M. • Newark , DE • November 18, 2014
Discovered that the common cause of the problem was the latch in the door. Found a video online that showed the exact procedure for my model dishwasher. Ordered the part from AppliancePartsPros on a Thursday afternoon and it was in my hands by noon on Friday. Carefully took the door apart, compared parts, reassembled, and the joy on my wife's face was priceless when the dishwasher started up without doing anything special. Do not be afraid to attempt this repair.
Read more
More
$71.95
- Compare At:
-
$84.90
- You Save:
-
$12.95