Power Strike Small Engine Spark Plug Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3378138
The Dispenser Lid is an OEM replacement part for Whirlpool dishwashers. Located at the top of the dishwasher door, it provides access to add detergent and rinse aid to the internal dispenser compartment below. This dishwasher soap dispenser lid is included in the dispenser cover kit 4387043.
Causes of a bad dispenser lid can include wear and tear of hinge points from years of repeated openings. Cracks may also arise in the plastic material.
Symptoms of a bad Dispenser Lid include:
- Difficulty fully opening or closing the lid securely
- Leaks or spills occurring from around the sealing edges
- Potential cracks that compromise lid integrity or function
- Hinges that are loose or fail to support the lid in position
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Amana, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Soap dispenser lid spring wasn't opening lid Frank D. • Philadelphia , PA • December 22, 2014
I watched the video on your site and it showed step by step how to replace the spring. Excellent shipping time. Good customer service on chat forum.
Read more
More
$30.76
- Compare At:
-
$36.60
- You Save:
-
$5.84
Genuine Whirlpool part
By: Whirlpool
Part Number: 4387043
The Dispenser Cover Kit is an OEM replacement part for Whirlpool dishwashers. It includes both the outer lid that protects the detergent and rinse aid compartments as well as the latch mechanism securing it closed. This dishwasher dispenser kit included the cover, lid hinge pin, spring, snap, and latch.
Causes of a bad dispenser cover can include wear and tear from frequent use, physical damage from accidental impact, and discoloration or warping due to exposure to sunlight or heat.
Symptoms of a bad dispenser cover kit include:
- Cracks or breaks in the cover
- Discoloration or yellowing of the plastic
- The cover not fitting securely or becoming loose
- Difficulty in using the dispenser controls due to a damaged cover
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Dispenser cover would no longer open automatically Rhonda D. • Buda , TX • March 25, 2014
We ordered the dispenser cover kit. the problem was with the spring. followed your "how to" video and it was a quick and easy fix!
Read more
More
$35.95
- Compare At:
-
$42.78
- You Save:
-
$6.83
Genuine Whirlpool part
By: Whirlpool
Part Number: W11429589
Dryer won't start or run? A worn or broken door strike prevents the latch from engaging properly. Quick 5-minute fix restores safe operation.
Do-It-Yourself Stories from Customers like You
Door latch broken had to tape the door shut to dry clothes Lisa M. • Ozark , MO • March 11, 2016
I ordered the male and female door latching parts.
Read more
More
$21.46
- Compare At:
-
$25.54
- You Save:
-
$4.08
Genuine Ge part
By: Ge
Part Number: WE04X26216
Dryer not heating properly or overheating? This thermostat regulates temperature to keep your dryer running safely. Simple DIY fix in under an hour.
Do-It-Yourself Stories from Customers like You
No heat no code Wayne R. • Cabot , PA • July 21, 2026
This was a friends dryer. They'd been quoted a $200 call out fee and after taking with them on the phone were also told they could have the dryer taken away for $150. I told my friends that inwould fix it. I used a multimeter to check the thermostats, heaterbelement and funrion dial. I found 2 bad thermostats. I orderd one part from you, another from elsewhere as you did not have stock. I replaced the dead parts with new and the dryer heats again. It cost me $65 total in parts and shipping to...
Read more
More
$36.95
- Compare At:
-
$44.34
- You Save:
-
$7.39
Genuine Ge part
By: Ge
Part Number: WD30X10020
Roller bearing cage installs in the dishwasher rack track to support smooth gliding. Replace if cracked, broken, or causing the rack to stick or slide out.
Do-It-Yourself Stories from Customers like You
Instructions to replace wd12x10304 (ap4484666) roller bearings Richard L. • Webster , NY • February 18, 2016
I did not see the old ones fall out, so I was not sure the exact product placement within the rail, which was frustrating, to say the least.
For the next person's benefit....these slide into the MIDDLE of the rail that is attached to both sides of the dishwasher. Not the front, not the back, but the middle!
Steps to fix:
1) Order 2 of these Roller Bearing Cage.
2) Order 4 of WD12X10304 (AP4484666) end caps!! Unless you have brand new ones already, you will need them for sure and they are...
Read more
More
$34.95
- Compare At:
-
$41.59
- You Save:
-
$6.64
Genuine Ge part
By: Ge
Part Number: WH01X10626
Washer won't start or spin? This lid lock magnet triggers the safety sensor to confirm the lid is closed. Simple DIY fix restores normal operation.
More
$14.95
- Compare At:
-
$17.94
- You Save:
-
$2.99
Genuine Ge part
By: Ge
Part Number: WE04X25200
Dryer not heating or drying clothes properly? This cycling thermostat regulates temperature during the drying cycle. Moderate DIY repair for most models.
Do-It-Yourself Stories from Customers like You
Failing to dry clothes David K. • Mohnton , PA • September 19, 2022
Removed exterior panels, cleaned all venting, replaced outlet thermistor and thermostat. Pressure washed all removable parts. Reassembled. Now working as it should.
Read more
More
$18.95
- Compare At:
-
$22.55
- You Save:
-
$3.60
Genuine Frigidaire part
By: Frigidaire
Part Number: 154662601
If your dishwasher door won't latch or stay closed, the door strike may be broken or corroded. This repair takes about 15 minutes with basic tools.
This part fixes the following symptoms
-
Door latch failure
-
Door won't close
See more...
Do-It-Yourself Stories from Customers like You
Door was not closing properly Channoya W. • Jacksonville , NC • March 20, 2014
Replaced the door strike
Read more
More
$49.46
- Compare At:
-
$58.86
- You Save:
-
$9.40
Genuine Frigidaire part
By: Frigidaire
Part Number: A00130341
Fix a soap door that won't open or stay closed. This detergent dispenser releases soap at the right time during wash cycles. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Dish soap door wouldn't stay closed Brad D. • Orrville , OH • April 19, 2020
Started with a YouTube video, then this site. Between the two, fixed in about a half an hour.
Read more
More
$77.95
- Compare At:
-
$92.76
- You Save:
-
$14.81
Genuine Whirlpool part
By: Whirlpool
Part Number: W11366436
Fix a dryer door that won't stay closed or requires multiple attempts to latch. This door strike latch secures the door during operation. Simple repair.
Do-It-Yourself Stories from Customers like You
Dryer door would not shut. John H. • Louisville , KY • October 03, 2021
I followed the video on the parts page and had the part replaced in no time. My dryer door was slightly different than the example, but the concept was the same. My part arrived the next day and the repair took less than a half-hour. Extremely satisfied with this site
Read more
More
$21.46
- Compare At:
-
$25.54
- You Save:
-
$4.08
Genuine Ge part
By: Ge
Part Number: WE1M570
Dryer door won't stay closed or pops open during cycle? This mounting plate anchors the door strike for secure latching. Quick DIY fix with video guide.
Do-It-Yourself Stories from Customers like You
The dryer door kept popping open. Debra S. • Peabody , MA • September 22, 2019
We ordered a door switch, dryer latch and strike plate. We realized that we only needed to replace the door switch. We watched a few videos and then replaced the switch. We couldn’t find a video for our model but they did give us a pretty good idea about what we needed to do. The hardest part was getting the original door switch out, all of the videos we watched showed us that it would pop out with a little pressure from a flat head screw driver, from the front of the switch. We could not get...
Read more
More
$14.95
- Compare At:
-
$17.79
- You Save:
-
$2.84
Genuine Whirlpool part
By: Whirlpool
Part Number: WP306604
Dryer won't heat or start? This thermal fuse cuts power when temperatures get too high. Test with a multimeter for continuity. Easy DIY repair.
This part fixes the following symptoms
-
Won't start
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
Maytag gas dryer was not heating Christopher P. • Los Angeles , CA • October 04, 2014
Did some dryer repair research (dryer not heating) on the internet. Bought an ohm meter, opened up the dryer and tested the cut-off-T, high limit thermostat, dryer igniter, flame sensor, cycling thermostat for continuity. The igniter was bad, the other parts tested ok. Went online to AppliancePartsPros.com searched for a new igniter for my specific dryer model, found the right replacement igniter and watched the video on how to replace the igniter. Because my dryer is old (15+ years) and I...
Read more
More
$29.48
- Compare At:
-
$34.79
- You Save:
-
$5.31
Genuine Frigidaire part
By: Frigidaire
Part Number: 137006200
Drawer won't stay closed? This pedestal drawer latch secures storage drawers in washer and dryer pedestals. Simple DIY replacement in 15 minutes.
Do-It-Yourself Stories from Customers like You
The electrolux pedestal drawer would not latch and stay closed. Paul N. • Dover , MA • December 08, 2017
Went on line to Appliance Parts Pros Brought up the parts diagram located the new latch and prong for the drawer.
My new parts arrived in 2 days installed the parts put the drawer assembly back together closed the drawer all all is fine.
I have another pedestal drawer under the washer all the same age so I ordered a spare fully knowing I will need it sooner or later.
Read more
More
$77.95
- Compare At:
-
$92.76
- You Save:
-
$14.81
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304507354
Soap dispenser door won't open or latch is broken? This detergent dispenser assembly fixes dispensing failures. DIY repair takes 10-15 minutes.
Do-It-Yourself Stories from Customers like You
Rinse agent leaking from the dispenser Hal C. • Clarksville , TN • September 13, 2016
This was a pretty easy fix. Removed the screws around the perimeter of the inside cover of the door and pressed the outer door cover upward to release it from slots retaining it. There are four wires to remove (2 for the detergent door release and 2 for the rinse agent release). Removed the 6 screws retaining the dispenser assembly and inserted the new one. Reassembly is simply in reverse order.
Problem solved for less than the cost of a service technician's call!
Read more
More
$61.56
- Compare At:
-
$73.87
- You Save:
-
$12.31
Genuine Ge part
By: Ge
Part Number: WE04X20685
The Thermistor is an OEM replacement part for GE dryers. This temperature-sensing device monitors air exhaust temperatures and communicates real-time readings to the control board. Precise thermistor functioning ensures the heating elements and drum engage safely and appropriately.
Symptoms of a faulty thermistor include:
- Slow or inconsistent drying times
- Excessive heat inside the dryer chamber
- Overheating indicator lights illuminated
- Potential shut-offs due to high-limit temperature triggers
Causes often relate to moisture exposure from normal operation degrading electronic performance over time. Physical stress or impact could potentially damage thin connecting wires.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore dryers.
Do-It-Yourself Stories from Customers like You
Gas dryer was not heating Charles M. • Huron , OH • September 01, 2016
Checked vent first to see if there was a blockage.
Removed top, front and drum of dryer.
Replaced all sensors including flame detection and gas valve coils.
Re-assembled and tested.
Dryer was now heating
Read more
More
$18.76
- Compare At:
-
$22.14
- You Save:
-
$3.38
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3398128
This cycling thermostat monitors the air temperature inside the dryer drum and signals the heating element to turn on and off to maintain the selected drying temperature. It is a small, disc-shaped component typically mounted on the blower housing or exhaust duct. Replace this thermostat if your dryer is not heating, overheating, running too cool, or shutting off before clothes are fully dry.
Do-It-Yourself Stories from Customers like You
Thermostat and thermofuse Britt A. • Concord , NC • February 16, 2015
Out with the old. In with the new. No problem. Dryers are simple and usually can be fixed quickly. appliance pros makes it easier with their tutorial videos and fast shipping!
Read more
More
$57.39
- Compare At:
-
$68.29
- You Save:
-
$10.90