Need Help?
Call
Fix unresponsive buttons, cycles that won't start, or blinking lights. This user interface board restores control panel function in about 30 minutes.
1. Turn off the electricity to the dishwasher 2. Unscrew all of the screws on the inside of the dishwasher door. 3. Take off the door and put it aside 4. Loosen the panel that contains the control board, control panel and the door lock mechanism 5. Using a screw driver, push in the small moveable tab in the center of the plastic clip that is holding the control board to the plastic panel. 6. Unhook the ribbon that is attached to the bad control board. 7. Attach the ribbon to the new control... Read more
This is an electronic noise filter assembly that mounts on the dishwasher's power supply line. It suppresses electromagnetic interference generated by the dishwasher's motor and electronic controls, preventing it from affecting other appliances or electronics on the same circuit. Replace this part if the dishwasher trips breakers, fails to power on, or if you notice electrical interference with nearby devices when the dishwasher is running.
Replaced noise filter. Read more
Ice won't dispense or gets jammed? This ice bucket assembly stores and feeds ice to your dispenser. Restores smooth dispensing in about 20 minutes.
I ordered part from appliance parts and it was perfect fit. Read more
Ice maker stopped producing ice? This refrigerator ice maker assembly restores ice production. DIY-friendly installation takes about 15 minutes.
We had a sears tech come out and "inspect" our freezer - he said it was one of the 2 vales behind the fridge that needed to be replaced. I found them for 50 bucks each on amazon... but then I thought I might shop around. Then i found this kit - that has the 2 valves AND the icemaker assembly for basically the same price. I went ahead and swapped out the icemaker assembly since it didn't involve getting behind the fridge. the next morning - BOOM ice. lots of ice. amazed. and happy. Read more
This ice maker assembly automatically creates ice cubes in your refrigerator by filling with water, freezing, and ejecting completed ice. It operates on a timed cycle to continuously replenish your ice supply. Replace this assembly when ice production stops, cubes are irregularly shaped, or unusual noises occur during operation.
Fridge fan is working. Water filter is new. Strong pressure on water dispenser. Ice is full on the icemaker when it stopped so I figured the ice maker broke down. It took me sometime to figure out how to remove the icemaker. No screws or slots visible Read more
Ice maker not ejecting ice or forming icicles? This freezer ice maker assembly produces and dispenses ice cubes. DIY-friendly replacement part.
Replaced ice maker. Read more
This ice maker kit adds automatic ice-making capability to compatible refrigerators. It supplies the core components to produce, harvest, and store ice cubes reliably, restoring convenience when the original icemaker or related parts are missing or failed.
Bought y'all's kit it worked like a jiffy! ?????????? Read more
Dishes not getting clean in the upper rack? A worn middle spray arm hub prevents proper rotation and water distribution. DIY fix in 15 minutes.
I did an internet search - found your site explaining how to fix. I purchased the upper, middle, and lower spray arms - It took about 15 minutes total. Very very easy. No more dirty dishes! Read more
Dishwasher won't start, stops mid-cycle, or won't advance? Replace the main control board to restore proper cycle operation. Moderate DIY repair.
Turn off power to machine, Take off door panel - 12 screws. hold up door panel a bit and make sure to remove the ribbon from the touch pad to the control module (use some pliers to rock it out of the board). Since I was changing the Module, I just removed the 1 screw that held it in place and it gave me some more room to get my hands in there and remove all the wiring freeing up the board to remove the touch pad ribbon last (I didn't want to tear it because I was not replacing it and after 9... Read more
Ice maker won't stop making ice or arm keeps falling off? This shut-off arm senses bin levels to control production. Simple snap-in installation.
The Electronic Control Board is an OEM part for Whirlpool dishwashers. As the central processing unit, this board regulates all wash and rinse cycles according to preprogrammed instructions. It communicates timing and commands to other crucial components.
Symptoms of a faulty control board include:
Causes can involve water intrusion corroding circuits or individual component failure due to prolonged operation. Over time, environmental factors may inhibit board performance.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
It's very easy fix. If your unit flashing e2 f2. It's your relay board take screw if on door couple latched s on the gray relay box pull wires harness of slow. Re install the same way it came of Just remember to cut the power off first . Leave your door open when re powering unit. Read more
Ice won't dispense or bin tips forward? Replace your worn upper ice bin to fix jamming, spillage, and broken mounting prongs. Easy DIY with video guide.
Took the broken bin out and put the new bin in. all of maybe two minutes. Read more
Missing or cracked ice bin? This replacement ice cube pan restores contained ice storage in your refrigerator's freezer. Simple slide-in installation.
Had the parts I needed at a lower cost Read more
Ice won't dispense or bin is cracked? This ice container assembly stores ice and feeds the dispenser. Easy slide-in replacement—most installs in minutes.
Just slid the old one out and slid the new assembly in! Read more
Ice maker not dispensing or spilling ice? This ice guide assembly directs ice cubes properly. Easy 5-10 minute DIY fix with basic tools required.
Didn't know what to call the part - got on chat one evening and the wonderful customer service rep knew exactly how to direct me - and even ordered the part for me! It arrives 2 days later - and we fixed our problem! Seems like breaking the plastic arm when the ice sensor starts to fall down happens rather often - 2nd time we have replaced it - but the fix is easy. Wish there was a permanent fix for the ice sensor - I don't think we have the problem solved just yet - but the plastic arm... Read more
Fix a dishwasher that won't complete cycles or runs indefinitely with this control board. Controls all wash cycles and functions. 30-minute repair.
I ORDERED A NEW CONTROLLER BOARD. THE DIRECTIONS SHOWED HOW TO UNCLIP THE OLD BOARD BUT THE FASTENERS WERE ON THE LEFT SIDE NOT THE BOTTOM AS INDICATED ON THE REPAIR INSTRUCTIONS. AFTER REASSEMBLY THE DISHWASHER FUNCTIONED AS NEW. THNKS FOR THE INSIGHT. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.