Heating Element Parts

The Bake Element is an OEM part for Bosch ranges and ovens. It is responsible for generating heat through its calibrated heating coils to bake and roast foods evenly. Consistent heat production is essential for optimal cooking performance.

Causes of a bad bake element can include coil failure due to deterioration over time and heat exposure, cracks or damage to insulators, or interrupted electrical flow.

Symptoms of a failed bake element include:

• Incomplete or uneven baking
• Extended cook times even at higher temperatures
• Failure to reach or maintain desired bake temperature settings
• Cool spots or cold spots appearing inside oven cavity

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Broiler not heating or element burned out? Replace this top broil element to restore radiant heat. Easy DIY fix with basic tools in 30 minutes or less.

This is a dual radiant surface element for compatible glass-ceramic ranges and cooktops. It restores responsive, even heating and lets you choose a smaller inner ring or the full element to match your pan size. What it does:

• Converts electrical energy into radiant heat for the cooking zone
• Dual circuits provide selectable inner-only or full-size heating
• Helps resolve a burner that won't heat or heats only on one ring
• Addresses uneven or intermittent heat and visible hot spots or breaks in the element

• 1 dual radiant surface element

• Disconnect power at the breaker and allow the cooktop to cool before servicing
• Access the element per your model's service procedure; note wire locations before removal
• Handle the element carefully and transfer any mounting brackets/insulators from the original
• After installation, test both inner and outer heat settings for proper operation

Oven not heating or preheating slowly? This bake element restores bottom heat for even baking and consistent temperatures. Moderate DIY repair.

Oven won't heat or bake properly? This bake element kit restores even heating for baking and roasting. Located at oven bottom. DIY repair under 1 hour.

Element not heating? This surface element is the most common fix. Compatible with Frigidaire electric ranges. Tests between 15-45 ohms resistance.

Oven not heating or taking too long to preheat? This bake element installs at the bottom of the cavity to restore consistent heat and proper baking.

Oven not heating or baking unevenly? This lower bake element restores consistent oven temperature for proper cooking. Moderately difficult DIY repair.

Oven not heating or slow to preheat? The bake element heats from the bottom during baking. Most DIYers replace it in 15-20 minutes with basic tools.

This bake element supplies the primary heat from the bottom of the oven during the Bake cycle. Replace it to restore proper preheating and even results when the original is burned out, damaged, or no longer heating. What it does:

• Provides radiant heat for baking and preheating from the lower oven position
• Helps the oven reach and maintain the set temperature for consistent cooking
• Common symptoms: no heat in Bake, very slow preheating, uneven baking, or a visible blister/crack in the element
• Restores normal oven operation when the existing element has failed

• 1 bake element

• Disconnect power at the breaker or unplug the appliance before servicing
• Remove oven racks; take out the element's mounting screws and gently pull the element forward
• Support and disconnect the two wire terminals; prevent wires from slipping back into the insulation
• Attach wires to the new element, secure with existing hardware, restore power, and test

Oven won't heat properly during baking? This lower bake element restores even heating. Easy 15-minute DIY repair with basic tools required.

The Broil Element is an OEM part for Whirlpool ranges. This heating element is responsible for providing high heat from the top of the oven, essential for broiling and achieving a crisp, browned finish on dishes.

Common causes of a faulty broil element include wear and tear over time, exposure to high temperatures, or physical damage from cleaning or moving oven racks.

Symptoms of a bad broil element include:

• The broil element not heating up
• Uneven cooking or broiling results
• Visible damage, such as breaks or blisters on the element
• The oven not reaching the desired temperature during broiling

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This replacement surface element restores proper heating on an electric range or cooktop's top burner. When the original element is open, weak, or damaged, it helps the selected cooking zone reach temperature and heat more evenly.

• Converts electrical power into heat at the chosen surface zone for everyday cooking
• Replaces an element that is open, shorted, or physically damaged
• Common symptoms: surface burner won't heat, heats intermittently, heats very slowly, or shows uneven temperatures
• Works with existing controls to maintain set heat levels

• Disconnect power at the breaker or unplug the appliance; allow the cooktop to cool completely
• Access the element per your model's service procedure (often by lifting the top or accessing from beneath the cooktop)
• Transfer wires one at a time to the matching terminals; secure the element and any brackets as originally installed
• Inspect connectors/wiring for heat damage and address as needed before restoring power and testing

Fix a burner that won't heat with this range surface burner element. Simple plug-in installation takes minutes. Compatible with multiple models.

Burner won't heat or heats unevenly? This 12-inch haliant surface element restores full cooking performance on glass-top ranges. DIY-friendly, 30-minute repair.

Oven not heating or baking unevenly? This lower bake element restores consistent heat from the bottom of your oven. Moderate DIY repair for most models.