User Control Display Board Parts

On their website, I sent a message to the repair tech to explain what was happening. They diagnosed exactly what the problems was and the part I needed to repair it. Thank you for the help. You saved me money in repairs. Read more

After talking to the tech support people and telling them that the bake element and temp. probe were new and still had the same problem. They said it sound like the control board was bad. They were very helpful. After replacing the control board the problem was fixed. Very good service from the parts dept. and prompt delivery time. I will be using these people again. Read more

Ordered the controller and installed it. Now it works like a charm. Read more

I started by replacing the lid switch without the desired result. So I decided to replace the timer unit. It works like a new machine at the moment. At least on the first trial load. More loads will convince me that it is fixed for sure. I cannot be more complimentary about Appliance Parts Pros as I live very remotely in West Texas. The part arrived quickly and it was the exact right part required as ordered. This is my second order and I will return for more parts if I need them. Read more

• Fridge too warm

Order a new defrost timer from ApplianceParts online. I received the parts in a couple of days, installed it and that completely fixed the problem. Thanks ApplianceParts for such fast, efficient service; and for a part that was very reasonably price, not to mention the ease in finding it on your website by using the model number of my fridge. Couldn't have been easier. Read more

Read trouble guide then watched video Ordered part on friday,received it on monday easy install,stove works like new. ApplianceParts Pros wed was very helpfull Thankyou Read more

Replaced the defrost timer. It was not located where the parts explode suggested in the thermostat control box which is located in the upper right corner of the liner. It was in fact outside the freezer compartment on the back lower left support (when looking at the back of the freezer). It is secured with 2 sheet metal screws with a 1/4 hex head. The manual override dial is visible through a punched hole in that support. Just remove the 2 screws, disconnect the electrical connector. Then... Read more

1. Purchased a new Facade. The removal of the old one was relatively easy except that the two screws that hold it in place (behind the spill tray) were rusted (they should have used stainless steel ones) one came out with a vise grip but on the other I had to buy an "Easy Out" tool from Home Depot, once out the unit drops down. Had my wife hold the new unit, swiped the wires from old to new, removed the control board from the old one and installed it on the new one with one screw and cleaned... Read more

EVERY THING WORKS, PUT IN NEW CONTROL BOARD AND WATER VALVE. VERY PLEASED. Read more

Downloaded the Frigidaire Service Manual for Electric 5.8 cubic foot dryer from the ApplicanePartsPro.com forum. Used its information to check for error codes. None display. Ran the function test sequence. All the tests OK. Used a mutli-meter to check the circuit to the moisture sensor bars inside the door. Thought maybe the circuit could be open due to a loose plug or broken wire. This could signal the control board that the clothes are dry. This all checked OK. Since the top four... Read more

The washing machine intermittently would not agitate or spin. A reset of the timer dial fixed it. Then nothing fixed it. Originally thought it was the timer but father wanted to check out other possibilities. So he brought his meter over and went through all that he could, including checking power to the motor below. All was good electrical-wise. On the holiday, January 1, a rep. at AppliancePartsPros assured me that if a new timer did not fix the problem, I could return the item, even... Read more

Replaced the cheap plastic lever supporter with another LG OEM cheap plastic lever supporter. I should have bought two as I can see this problem happening again. Job was a simple fix and only required a Phillips head screwdriver. I did not need to remove any connections as there was enough room and wire to pull out the oven control assembly and make the repair. One word of caution is to be careful as the sheet metal internal cover and bottom of the control knob panel is razor... Read more