Icemaker Thermistor Parts
Genuine Lg part
By: Lg
Part Number: 6615JB2005C
Fix ice buildup on evaporator coils or freezer not defrosting properly. This defrost thermostat monitors temperature to prevent frost. 2-hour repair.
This part fixes the following symptoms
-
Frost buildup
-
Doesn't shut off
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
LG refrigerator not cooling but freezer worked after viewing videos and talking to AppliancePartsPros, I ordered the parts Robert C. • Flowery Branch , GA • November 30, 2019
I removed the defrost sensor assembly, installed a new one, it worked. Because of a shipping problem with FEDEX, Appliancepartspros resent the parts not once but twice. Needless to say, they are my go-to source for parts from now on.
Read more
More
Genuine Ge part
By: Ge
Part Number: WE04X20685
The Thermistor is an OEM replacement part for GE dryers. This temperature-sensing device monitors air exhaust temperatures and communicates real-time readings to the control board. Precise thermistor functioning ensures the heating elements and drum engage safely and appropriately.
Symptoms of a faulty thermistor include:
- Slow or inconsistent drying times
- Excessive heat inside the dryer chamber
- Overheating indicator lights illuminated
- Potential shut-offs due to high-limit temperature triggers
Causes often relate to moisture exposure from normal operation degrading electronic performance over time. Physical stress or impact could potentially damage thin connecting wires.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore dryers.
Do-It-Yourself Stories from Customers like You
Gas dryer was not heating Charles M. • Huron , OH • September 01, 2016
Checked vent first to see if there was a blockage.
Removed top, front and drum of dryer.
Replaced all sensors including flame detection and gas valve coils.
Re-assembled and tested.
Dryer was now heating
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10583817
Ice maker not producing ice? This complete ice maker kit replaces failed units in 30-60 minutes. Includes all components to restore ice production.
Do-It-Yourself Stories from Customers like You
Ice maker not making ice Mark R. • West Jordan , UT • August 14, 2014
Purchased the kit, followed instructions, within 30 minutes had the new ice maker installed. Works wonderfully.
We were quoted over $350 to fix it from a repair agent, but it only cost $150 including shipping from you guys.
Very happy.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304525221
Fix a dishwasher that stops mid-cycle, overheats, or won't heat water. This thermostat regulates temperature during wash cycles. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
My dishwasher was getting overheated several plastic items got melted Pramod M. • Sugar Land , TX • April 04, 2016
So I replaced the hi-temp thermostat and the problem is fixed.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10392132
Fix a refrigerator not cooling or ice buildup on evaporator coils with this defrost thermostat. Moderately easy install, typically 1-2 hours.
Do-It-Yourself Stories from Customers like You
Repeating freezing of defrost drain. Frank A. • Greenwood , IN • February 21, 2022
Fridge keept building up ice in defrost drain drain in freezer. Once the drain pan filled with ice it drips into fridge compartment. After taking things apart three times to thaw it out, decided to replace defrost components - heater and temperature switch. In addition to new parts, also added a 12 gauge copper wire hook that hangs from defrost heater into the defrost drain.
After this, the defrost cycle is running as expected, but will not know if the issue is corrected until a year or so...
Read more
More
Genuine Ge part
By: Ge
Part Number: WL49X20360
The Kit Sensor Speed is an OEM part for GE washing machines. It plays a crucial role in monitoring the drum's speed and movement, ensuring that the washer operates with optimal efficiency and precision. This sensor helps adjust the spin cycle based on the load, which is essential for proper balancing and to prevent excessive vibration and noise.
Symptoms of a failing Kit Sensor Speed include:
- The washer experiencing unbalanced loads frequently
- Excessive vibration during the spin cycle
- The washing machine making louder than normal noises
- Error codes related to the drum speed appearing on the display
Causes of a bad sensor can stem from electrical faults like wiring issues or component malfunctions, physical damage from overload or impacts, or simply wear and tear over time.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
More
Genuine Ge part
By: Ge
Part Number: WR02X10668
The Temperature Sensor Seal is an OEM part for GE refrigerators. This seal is designed to protect the temperature sensor from moisture and other environmental factors that could affect its accuracy and longevity. By providing a barrier against the harsh conditions within a refrigerator, such as humidity and temperature fluctuations, this seal ensures that the sensor can accurately monitor and control the refrigerator's internal temperature.
Causes of a malfunctioning Temperature Sensor Seal can include wear and tear over time, degrading the seal's effectiveness. Physical damage like tears or punctures can allow moisture to reach the sensor. Improper installation may leave gaps or loose areas around the sensor, compromising the seal.
Symptoms of a bad Temperature Sensor Seal include:
- Inaccurate temperature readings.
- Condensation or frost near the sensor location.
- Frequent cycling or unusual patterns in the refrigerator's cooling process.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Fresh food side temp display says 37 degrees but inside ff side measures over 40 degrees. John N. • Southlake , TX • February 03, 2018
This fridge has had a problem of ice building up around evaporator coil in fresh food side. Wife (she HATES this thing) says it's done this from day one; 10 years. GE guy says all these models do this and there's no fix for it, so we have clean out the ice periodically... Like the 1940s pre auto defrost.
Now with the issue of FF side temp too highi assumed the ice had built up around FF evaporator coil preventing proper cooling, but AppliancePartsPros.com suggested the FF temp thermistor may...
Read more
More
Genuine Lg part
By: Lg
Part Number: 6501EL3001A
The Igniter Sensor is an OEM part for LG dryers. This sensor plays a critical role in the ignition process, ensuring that the gas ignites properly to produce the heat necessary for drying clothes efficiently. It helps monitor and regulate the ignition temperature.
Over time, the igniter sensor can become faulty due to regular use, exposure to high temperatures, or electrical issues. These factors can lead to a malfunction, resulting in the dryer not heating properly or failing to start.
Symptoms of a bad igniter sensor include:
- Dryer not heating up
- Long drying times
- Dryer not starting
- Unusual smells or noises during operation
This OEM LG part is also compatible with Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Dryer started gas line good won't heat early model no codes Timothy M. • Roaring Spring , PA • November 25, 2016
Used video and took apart dru, this was extremely helpful. I bypassed the belt and door switch. Tested gas valves (gas disconnected) with multimeter. Found that the igniter worked the first gas valve, but the second gas valve would not open and the igniter would stay on. Found a flow chart online that shows the flame detect turns on causing the gas to turn on and shuts off the igniter. I replaced it and tested again. Igniter turns on, shuts off, then power to the second gas valve turns...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3398128
This cycling thermostat monitors the air temperature inside the dryer drum and signals the heating element to turn on and off to maintain the selected drying temperature. It is a small, disc-shaped component typically mounted on the blower housing or exhaust duct. Replace this thermostat if your dryer is not heating, overheating, running too cool, or shutting off before clothes are fully dry.
Do-It-Yourself Stories from Customers like You
Thermostat and thermofuse Britt A. • Concord , NC • February 16, 2015
Out with the old. In with the new. No problem. Dryers are simple and usually can be fixed quickly. appliance pros makes it easier with their tutorial videos and fast shipping!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 279366
The Moisture Sensor is an OEM part for Whirlpool dryers. This part detects the moisture level in the clothing during the drying cycle, allowing the dryer to adjust the drying time accordingly.
Causes of a bad moisture sensor can include regular wear and tear, buildup of lint or residue, or physical damage.
Symptoms of a bad moisture sensor include:
- Clothes taking longer to dry or coming out still damp
- The dryer not stopping when clothes are dry
- The dryer shutting off prematurely
- Inconsistent drying results
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Dampness sensor was broken George L. • Marquette , MI • March 24, 2014
Viewed the video before I purchased the part. Received the part and put it in. Everything went as planned.
Read more
More
Genuine Lg part
By: Lg
Part Number: 5989JA1005G
This ice maker assembly produces, harvests, and dispenses ice cubes in your refrigerator's freezer section. It includes the ice mold, motor, and control mechanisms needed for automatic ice production. Replace this assembly if your refrigerator stops making ice, produces malformed ice cubes, or if the ice maker makes unusual noises but doesn't produce ice.
Do-It-Yourself Stories from Customers like You
Water was running all down the side of the freezer from the ice maker Helene C. • Ransomville , NY • February 06, 2015
Replaced the ice maker for the 2nd time in less than 4 years of owning the fridge. It's a super easy fix.......... remove one screw, unhook a wire harness and slide it out and then slide the new one in.
Read more
More
Genuine Ge part
By: Ge
Part Number: WE04X25199
The Thermostat is an OEM component specifically designed for GE laundry machines. It is a heat-sensing component that monitors and regulates air temperatures inside the dryer drum. Precise thermostat functioning ensures proper drying temperatures are reached and maintained for optimal performance.
Symptoms of a bad thermostat include:
- The dryer failing to heat or only heating intermittently
- Unexpected temperature display readings or error codes
- Inconsistent moisture removal or garments not fully drying
Causes include sensor degradation, electrical faults, or improper ventilation reducing its ability to accurately measure temperatures.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
No heat in gas dryer Peter S. • Glenview , IL • April 23, 2024
Realizing that there could be multiple reasons for a gas dryer failing to heat, I decided to test everything I could. The very detailed and product specific video showed me how to disassemble the dryer. The thermostat, cycling thermostat, high limit, flame detector, igniter, gas valve coils and timer all showed correct continuity or resistance. I thought it might be the gas valve itself, but felt that wasn't likely so I decided to go ahead and replace the thermostats and limit switch since...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10289690
Cracked or missing ice maker cover exposing internal components? This protective cover shields the ice maker assembly. Simple DIY install in minutes.
Do-It-Yourself Stories from Customers like You
Ice maker quit working Peter S. • Lawton , MI • October 29, 2015
Replaced icemaker and shutoff arm. Easy project.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP35001193
Dryer runs but won't heat? A blown thermal fuse is the most common cause. This overheating safety device protects your dryer's heating system. DIY repair.
Do-It-Yourself Stories from Customers like You
No heat Tony M. • Chester , NJ • February 01, 2015
Removed the heater of course and installed the part. Very easy to do no need to remove the drum, just top cover, control panel, and front door assembly. Remove the one screw holding heater, remove blue wire, turn heater CCW to the 8 o'clock poisiton. Install in the reverse order. This is the secound one in a month if it fails again i'll just bypass it and install a 25 AMP fuse.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP628356
Ice maker leaking or shutoff arm broken? This fill cup and bearing assembly directs water into the mold and supports the arm. 15-minute DIY fix.
This part fixes the following symptoms
-
Ice maker dispenses too much ice
-
Leaking
-
Ice maker not making ice
See more...
Do-It-Yourself Stories from Customers like You
Broken part Eva H. • Walnut Creek , CA • March 23, 2014
Watched online video and worked along - it was easy and quick - I was amazed!
Read more
More
Genuine Lg part
By: Lg
Part Number: 5989JA0002Y
Ice maker not producing ice or making grinding noises? This refrigerator ice maker assembly fixes failed ice production. Easy 10-15 minute DIY install.
This part fixes the following symptoms
-
Ice maker dispenses too much ice
See more...
Do-It-Yourself Stories from Customers like You
Just didn't work made a grinding noise like plastic gears grinding Lawrence Z. • Sarasota , FL • June 20, 2014
Item delivered to my door in 1 1/2 days, priced $40 below other sites I had checked. Installed in 15 minutes. Just know that when installing an ice maker they don't start to make ice immediately. It can take several hours
Read more
More