Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Lid Lock Switch Parts

Best Seller
Range Surface Element Switch
Genuine Ge part
By: Ge
Part Number: WB24T10022

Burner not heating or stuck on? This surface element switch controls power to your cooktop burners. Common repair when heat won't adjust properly.

Do-It-Yourself Stories from Customers like You Burner didn't work   Larry W. • Aiea , HI • March 23, 2014

Replaced the switch infin by watching the video Read more

More
$107.76

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Microwave Waveguide Cover
Genuine Ge part
By: Ge
Part Number: WB06X10638

This is a thin mica sheet that covers the waveguide opening inside the microwave cooking cavity. It protects the magnetron and waveguide from food splatter and moisture while allowing microwave energy to pass through into the cooking area. Replace it if the cover is scorched, cracked, or has burn marks, which can cause sparking or arcing during operation.

Do-It-Yourself Stories from Customers like You Mica canopy fell off and broke   Albert F. • Montague , MI • July 02, 2016

Replaced the canopy. Took a few trials to install. Once I realized than you slide the part towards the tabs til it stops and then while pushing up towards the roof pull it back under two metal ears it held it self in place. That was the easiest repair ever. Did not need any tools. Read more

More
$21.95

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Dishwasher Detergent Dispenser Module
Genuine Ge part
By: Ge
Part Number: WD12X24637

Detergent not dispensing or dishwasher door won't close? This dispenser module releases detergent at the right time. Moderate DIY repair difficulty.

Do-It-Yourself Stories from Customers like You Replace broken detergent module on a 6 month old GE dishwasher   Timothy A. • Akron , IA • September 29, 2020

Watched you tube video, fixed with no problem. Read more

More
$76.50

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Start Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3395382

The Start Switch is an OEM replacement part for Whirlpool dryers. It is an electronic component responsible for initiating the heating elements and tumble cycles upon user command from the control panel.   

Causes of a bad start switch involve general wear over extended use. Failure of the internal conducting surfaces interrupts circuit activation as well.

Symptoms of a bad start switch include:  

  • Heating elements or tumble cycles that will not engage properly
  • Dryer fails to operate or stops mid-cycle unexpectedly
  • Control panel appears non-responsive to selections  
  • Error codes related to ignition or power delivery faults

Note: This dryer push-to-start switch has 2 terminals.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore electric dryer models. 

This part fixes the following symptoms
  • Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You Dryer wouln't start heard the timer working but the starter wouldn't start   Perry B. • Stockton , CA • December 05, 2014

I replaced the starter switch, that really didn't need to be replaced, and the thermal fuse, which did. Read more

More
$50.57

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Dryer Push-To-Start Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10420741

This push-to-start switch initiates the dryer cycle when the start button is pressed. It sends a signal to the motor and control circuit to begin tumbling and heating. Replace this switch if pressing the start button produces no response, the dryer only runs while you hold the button down, or the switch feels loose or does not click when pressed.

Do-It-Yourself Stories from Customers like You The push start button didn't start the dryer   Kirsten K. • Fayetteville , NC • July 21, 2016

I replaced the part i ordered and it worked great! Read more

More
$27.37

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Dryer Door Strike
Genuine Ge part
By: Ge
Part Number: WE01M10007

If your dryer won't start or the door won't latch securely, the door strike may be worn or broken. This part ensures proper door closure. Easy DIY fix.

Do-It-Yourself Stories from Customers like You Dryer won’t start or stay on.   Mike M. • Rotonda West , FL • August 03, 2020

Replaced lint filter and door latch, but door switch was the answer. Works great! No video for this model but was able to view a similar one to follow. Read more

More
$12.47

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Washer Water Level Pressure Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 134762010

Fix a washer that won't fill, overfills, or shows E35 error code with this water level pressure switch. Moderate DIY repair takes about 1-2 hours.

Do-It-Yourself Stories from Customers like You E35   Michael B. • Mechanicsville , VA • September 13, 2016

Water valve not closing all the way. Water keep entering washer even with power cord unplugged. Parts I ordered fit perfect. Ordered on Thursday night , parts there Saturday. Great service and shipping. Thank Read more

More
$45.95

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Dishwasher Float Switch
Genuine Bosch part
By: Bosch
Part Number: 00165256

Dishwasher won't fill or keeps overfilling? The float switch detects water levels for proper filling and draining. Accessible repair in under 30 minutes.

This part fixes the following symptoms
  • overflowing
  • Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You Inlet valve would not open to let water into the dishwasher   Kurt J. • Burnsville , MN • January 09, 2015

I checked continuity at the float switch since I knew the inlet valve was working when direct wired to 120v. Switch did not have continuity. Replaced switch and inlet valve worked at start of cycle. Read more

More
$31.35

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Washer Outer Door Panel
Genuine Frigidaire part
By: Frigidaire
Part Number: 137265500

Replacement outer door panel for washer front-load doors. Installs around door glass. Replace if cracked at hinge, broken from impact, or warped plastic.

Do-It-Yourself Stories from Customers like You Washer door broken at hinge because heavy detergent fell on it.   Cherie M. • Los Angeles , CA • April 17, 2020

My teenaged son took the old washer door off and apart. He replaced our glass from our washer onto the new doors and attached it to the hinge. These doors are compatible with Kenmore washer even though it says Frigidaire. Read more

More
$201.78

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Door Catch Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: LA-1003

The Door Catch Kit is an OEM part for Whirlpool dryers. It includes the door catch and the necessary mounting hardware to secure it in place. This kit ensures the dryer door remains securely closed during operation, preventing heat loss and ensuring the appliance functions efficiently.

Causes of a bad door catch include regular wear and tear, physical damage, or misalignment of the door, which can impact the catch's ability to latch properly.

Symptoms of a bad door catch include:

  • The dryer door not staying closed
  • Difficulty latching the door shut
  • The dryer stopping mid-cycle due to the door opening

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Door won't close
  • Shuts off too soon
  • Doesn't shut off
  • Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You Door clip to my dryer broke   Richard D. • North Dinwiddie , VA • March 15, 2014

Ordered a new clip and installed it. Easy to do. Unplugged the dryer. Removed the front. It is only held on by two screws. Removed wires to the door switch. removed the female end (it had the broken male piece in it. Inserted the new female part in the front, clipped in the male part into the door and reconnected the door switch wires, screwed the front back on. Job done. Total time was less than 10 minutes. Works like new. Read more

More
$25.76

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Dryer Door Catch Assembly
Genuine Speed Queen part
By: Speed Queen
Part Number: D510177

Dryer won't start or stops mid-cycle? A worn door catch prevents secure latching. This assembly holds the door shut so your dryer runs. DIY-friendly repair.

Do-It-Yourself Stories from Customers like You Dryer door would not close, door catch was broken.   Judy J. • Caledonia , MI • December 17, 2019

I called a local appliance store that gave us a replacement. That one broke after 1 week! The door was off balance. Tightened screws to realign. I found your store online and ordered the part. Arrived in 1 day! The part is much stronger than the first one. So far so good! Read more

More
$7.77

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Washer Lid Strike
Genuine Whirlpool part
By: Whirlpool
Part Number: WP358684

Washer won't spin or drain? A broken lid strike prevents the lid switch from detecting when the lid is closed. Easy 10-minute DIY fix with basic tools.

This part fixes the following symptoms
  • Will not agitate
  • Will not drain
  • Won't start
  • Timer will not advance
See more...
Do-It-Yourself Stories from Customers like You The spin cycle would not initiate pump to drain tub   Douglas B. • Skull Valley , AZ • January 21, 2017

Ordered new lid switch and plunger. Watched help videos and installed new parts, Washer works like new. Read more

More
$9.63

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Refrigerator French Door Cap
Genuine Samsung part
By: Samsung
Part Number: DA67-01650A

The Refrigerator French Door Cap is an essential component for maintaining the sleek appearance and functionality of your Samsung French door refrigerator. Crafted as a genuine OEM part, this cap ensures a perfect fit and seamless integration with your appliance. Designed to protect the casing around the French doors, it helps prevent wear and tear, keeping your refrigerator looking new for longer. The durable construction of the Refrigerator French Door Cap provides reliable coverage against scratches and impacts, enhancing the overall durability of your fridge. Installing this cap is straightforward, allowing you to quickly restore the original look of your Samsung refrigerator without the need for professional assistance. By choosing this genuine OEM part, you can be confident in the quality and compatibility, ensuring your appliance operates smoothly. Whether you need to replace a cracked, missing, or damaged cap, the Refrigerator French Door Cap is the perfect solution to maintain the aesthetic and functional integrity of your Samsung refrigerator.

Do-It-Yourself Stories from Customers like You French door center flap spring ripped out flap no longer opened automatically when door closed   Jonathan R. • Mequon , WI • March 27, 2016

In order it SHOULD be done: Pried off two white caps covering the screws that attach the flap to the left door, then removed screws. Lifted flap up to remove from door and disconnected cable. Used a thin blade to pry out the inner cover of the flap, then carefully pried out the insulation piece inside. Loosened the screw holding the center cap from the inside and removed cap. Worked the cable out of the hinge piece so it could be removed and cable pulled through case. Pried upper and lower caps... Read more

More
$9.95

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Washer Lid Strike (White)
Genuine Whirlpool part
By: Whirlpool
Part Number: W11513250

The Washer Lid Strike is an OEM part for Whirlpool washing machines. It is a metal bracket that secures the washer lid in a closed position during cycles. The lid strike has a spring-loaded arm that catches the lid tab, providing a tight seal and secure closure. 

Causes of a bad lid strike can include normal wear and tear over many cycles, damage from repeated impact or mishandling of the lid, or deterioration of components like the springs.

Symptoms of a defective lid strike include:

  • The washer lid not latching properly or staying securely closed  
  • Water leaks around the lid seam
  • Error codes related to the lid not locking
  • Difficulty opening the lid fully after cycles  

This OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washers. 

Do-It-Yourself Stories from Customers like You Lid strike   Mario P. • Laredo , TX • April 16, 2026

Yes Thanks to your advice and part Read more

More
$10.71

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Micro Switch
Genuine Ge part
By: Ge
Part Number: WB24X10146

The Micro Switch is an OEM part for GE microwaves. This part ensures the appliance operates only when the door is securely closed. It controls the electrical circuit, allowing the microwave to start heating food when the door latch engages the switch.

Causes of a bad micro switch can include wear and tear from frequent use, electrical issues, or physical damage from slamming the microwave door.  

Symptoms of a bad micro switch include:

  • The microwave not starting or stopping unexpectedly
  • The microwave running even with the door open
  • Intermittent power issues
  • The door not latching or the microwave indicating the door is open

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Stopped working tripped breaker   Roberto M. • Pembroke Pines , FL • March 08, 2019

By replacing the switches. Read more

More
$41.51

IN STOCK
Ships Monday Guaranteed
Add to Cart
Best Seller
Electric Range Infinite Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10312185

Burner stuck on high heat or won't regulate temperature? This infinite switch restores precise control. Straightforward DIY repair with a screwdriver.

Do-It-Yourself Stories from Customers like You Bad oven knob sensor was causing circuit breaker to trip   Kelly V. • Rockaway , NJ • December 27, 2019

Replacing the oven knob sensor was easy. Figuring out it was the sensor causing the circuit breaker to trip was the challenge. Read more

More
$87.35

IN STOCK
Ships Monday Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google