Pump Parts

The Circulation Pump is an OEM part for Whirlpool dishwashers. It is responsible for circulating water throughout the dishwasher during the wash and rinse cycles, ensuring that all dishes are cleaned thoroughly. The pump maintains a steady flow of water, distributing it evenly across the dishwasher's interior for optimal cleaning performance.

Over time, the circulation pump can fail due to factors such as wear and tear, blockage from debris, or electrical issues. A malfunctioning pump can compromise the dishwasher's ability to clean effectively, leading to unsatisfactory results.

Symptoms of a bad circulation pump include:

• Dishes not being cleaned properly
• Unusual noises coming from the dishwasher during operation
• Water not circulating or spraying inside the dishwasher
• Error codes related to water circulation issues

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Pump Casing Assembly is an OEM part for LG dishwashers. It houses critical components such as the circulating pump motor that spreads water throughout the tub during cycles. The durable and corrosion-resistant casing safeguards internal mechanisms.  

Causes of a faulty pump casing include cracking, leaks, or corrosion compromising its protective barrier over time. Mineral deposits can also affect motor performance.

Symptoms of a bad pump casing assembly are:

• Water leaks around or inside the dishwasher 
• Failure to completely purge water after draining
• Poor water distribution leaving dishes uncleaned
• Strange clicking or grinding sounds 

This OEM LG part can also be used on Kenmore/Sears appliances. 
 

The Pump Housing is an OEM part for Whirlpool dishwashers. As a central component, it contains the circulating pump that drives wash water through spray arms for thorough cleaning.

Symptoms of a bad pump housing include:

• Puddles or leaks from under the dishwasher main unit
• Limited or no water pressure to upper and lower spray arms  
• Water that does not properly drain at the end of a cycle
• Drying issues caused by residual water collection 

Causes can be cracks that develop from regular pump cycling stresses over time, or impact damage compromising seals and gaskets.

This OEM Whirlpool part is also compatible with some KitchenAid, Jenn-Air, and GE dishwashers.

Note: This kit contains both the Circulation Pump and Drain Pump along with a harness and clamps. Due to a factory revision, the pumps are no longer offered individually.

This dishwasher circulation pump and motor assembly drives wash water through the spray arms at the proper pressure. Replacing a worn or noisy unit restores strong water movement and consistent cleaning during the wash and rinse cycles. What it does:

• Circulates water through the spray arms during wash and rinse cycles
• Maintains wash pressure and flow for effective cleaning performance
• Direct replacement for a seized, leaking, or excessively loud wash pump motor
• Typical symptoms: poor cleaning results, spray arms not turning, little/no water movement, grinding or humming during wash

• One circulation pump and motor assembly

• Disconnect power and shut off water supply before service; allow the dishwasher to cool
• Access is typically from the bottom; remove the toe panel and pull the unit forward as needed; place a towel to catch residual water
• Note wiring and hose orientations; release locking tabs/clamps to remove the old pump
• Ensure the new pump seats and locks fully into the sump; reconnect hoses/wiring and test for leaks and proper spray operation

This replacement impeller fits inside the pump to move water through the appliance's system. A worn or broken impeller can lead to weak circulation, poor cleaning results, or a motor that hums without moving water. What it does:

• Mounts on the pump shaft to push water and create flow/pressure
• Helps deliver spray action and/or discharge flow for proper cycle operation
• Typical symptoms include poor wash performance, little/no water movement, or unusual grinding/rattling from the pump area

• 1 impeller

• Disconnect power and shut off water before servicing
• Access the pump assembly; remove lower panels or the sump as needed
• Clear debris, then install the impeller in the correct orientation, keeping any spacers in order
• Reassemble, restore power/water, and check for leaks and proper operation

The Drain Pump is an OEM part for Whirlpool dishwashers. This component is responsible for removing water from the dishwasher after each cycle. It actively pumps dirty water out through the drain hose and into the household plumbing system.

Causes of a bad drain pump include clogs in the line restricting water flow, failed or faulty motor windings preventing pump operation, or normal wear over time diminishing performance.

Symptoms of a bad drain pump include:

• Incomplete or inadequate draining of water after cycles
• Accumulation of standing water at the bottom of the unit
• Error codes or failure to fully finish cycles
• Strange noises or vibrations emanating from the drainage area

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Motor Fan is an OEM part for GE air conditioners. It circulates air throughout the unit, ensuring efficient cooling performance. This motor fan contributes to the appliance's ability to maintain a consistent, cool temperature in your space. 

Over time, the motor fan can wear out or become damaged due to continuous use, leading to a decrease in air conditioner performance.  

Symptoms of a bad Motor Fan include:

• Reduced airflow from the air conditioner
• Unusual noises coming from the unit, such as grinding or buzzing sounds
• The air conditioner fails to cool the room effectively
• The unit overheats or shuts off unexpectedly

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This evaporator fan motor circulates cold air across the evaporator coil so your refrigerator cools evenly and prevents frost buildup. Replaces a worn or noisy fan motor to restore normal airflow and temperature consistency. What it does:

• Spins the evaporator fan blade that moves cold air through the freezer and refrigerator compartments
• Helps maintain consistent temperatures and improves cooling performance
• Reduces or stops rattling, humming, or no-air symptoms caused by a failing motor
• Keeps frost from accumulating on the evaporator by maintaining proper airflow

• One evaporator fan motor assembly

• Disconnect power before servicing to avoid electric shock
• Access may require removing interior panels or the evaporator cover; follow your model's service manual
• Handle the fan blade and motor carefully to avoid bending blades or damaging the shaft