Skip to Content
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • 15 million satisfied customers 15 million satisfied customers
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store

Door Switch Parts

Refrigerator Door Light Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4387911

Fix a refrigerator light that won't turn on or off when you open the door. This push-button switch senses door position. DIY repair in 30 minutes.

This part fixes the following symptoms
  • Light not working
See more...
Do-It-Yourself Stories from Customers like You A failed freezer door switch was causing the fridge to display that the door was open when it was not this caused it to beep at random   Kara H. • Charleston , SC • March 08, 2016

We actually were able to determine that one of the freezer switches was bad and taped it down for about 3 days. The beeping stopped. Our fridge has two freezer switches and one fridge side switch. I ordered all three from these guys. They were cheaper than Whirlpool by about $20 for parts and about $15 for shipping. The part numbers had superseded too many times to count, usually that doesn't matter but in this case it did. The new parts were just slightly bigger than the old parts AND... Read more

More
$27.37
Compare At:
$32.57
You Save:
$5.20

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Dishwasher Water Level Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268909

Dishwasher overflowing or not filling properly? The water level switch controls fill amount. DIY-friendly repair, typically 20 minutes with video guide.

Do-It-Yourself Stories from Customers like You Washer would not fill with water   Ty J. • Hillsboro , OR • July 08, 2018

Replaced float switch and also replaced intake valve. Worked like a charm and the process was as easy as the YouTube video I followed made it seem. Read more

More
$50.57
Compare At:
$60.18
You Save:
$9.61

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Cooktop Triple Burner Infinite Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8286070

If your triple burner stays on high or won't adjust temperature, this infinite switch restores precise heat control for small, medium, and large rings.

Do-It-Yourself Stories from Customers like You Lower front left burner would not shut off this burner is the single dual and triple element burner   Maurice B. • San Diego , CA • May 07, 2015

Replace switch Read more

More
$109.41
Compare At:
$131.29
You Save:
$21.88

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Range Spark Ignition Switch
Genuine Bosch part
By: Bosch
Part Number: 00629722

This is a spark ignition switch used on a range or cooktop that controls the electric spark to ignite the surface burners when the control knob is turned. It connects to the burner igniter circuit and signals when to fire the spark module. Replace this switch if your burners won't ignite, the spark clicks continuously even after the flame is lit, or the igniter fails to spark when the knob is engaged.

Do-It-Yourself Stories from Customers like You My dryer started showing error codes. I had the repair company come to look at the oven, they told me that the oven was not repairable.   Dominick M. • Tinton Falls , NJ • December 12, 2021

I ordered all the parts from AppliancePartsPros.com and in two days I had every new part that was. Ordered. After being told from the appliance repair company that I wouldn’t get parts for months. I received all parts within 4 days, 19 different parts! Read more

More
$63.69
Compare At:
$75.79
You Save:
$12.10

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304511344

The Switch is an OEM component specifically designed for Frigidaire washing machines. It controls various cycle options like water temperature levels, spin speeds, and additional settings like stain removal cycles.

Causes of a bad switch can include water or chemical damage leading to component failure over time, or loose wiring connections causing intermittent issues.  

Symptoms of a bad switch include: 

  • Inability to select wash cycles or adjust settings  
  • Unresponsive or inaccurate temperature levels
  • Lights/displays not functioning as normal
  • Error codes indicating switch problems

This OEM Frigidaire replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. Replace yours today to avoid expensive repairs down the road.
 

Do-It-Yourself Stories from Customers like You Damaged switch during   Raymond J. • Gretna , LA • October 19, 2026

Replacement Read more

More
$61.56
Compare At:
$72.64
You Save:
$11.08

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Cooktop Infinite Switch Kit
Genuine Frigidaire part
By: Frigidaire
Part Number: 903097-9040

Element won't heat or overheats? This infinite switch kit restores precise temperature control to your cooktop's burners. Fixes erratic heating issues.

More
$78.95
Compare At:
$94.74
You Save:
$15.79

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Range Spark Ignition Switch And Harness Assembly
Genuine Lg part
By: Lg
Part Number: EBF60662911

This is a spark ignition switch assembly with wiring harness that controls the electric igniters on a gas range cooktop. It sends voltage to the spark modules when a burner knob is turned, initiating the clicking ignition sequence. Replace this part if your burners won't spark when turned on, spark continuously even when knobs are in the off position, or if only some burners ignite properly.

This part fixes the following symptoms
  • Doesn't shut off
  • Gas igniter glows, but will not light
See more...
Do-It-Yourself Stories from Customers like You All the igniters spontaneously began to fire   Michael S. • Adams , NY • October 12, 2019

Found a YouTube video online that provided instruction on how to change out the part. Read more

More
$74.95
Compare At:
$89.19
You Save:
$14.24

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Limit Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP12575501

This limit switch monitors a set condition and opens or closes its contacts when that limit is reached. Replacing a failed switch restores proper safety cutoff and consistent operation of the appliance's heating or movement system. What it does:

  • Senses a limit condition at its mounting point (such as temperature or travel/position, depending on model)
  • Changes state at a defined threshold to protect components and wiring
  • Interrupts power to heat or motor circuits, or signals a control to respond
  • Common failure signs: no heat or shuts down early, runs continuously, won't start, or intermittent operation
What's included:
  • 1 limit switch
Install notes:
  • Disconnect power to the appliance before servicing
  • Note wire positions; transfer connectors one at a time or take a photo for reference
  • Reinstall in the original orientation so the actuator or sensing surface contacts the correct area
  • Address root causes (blocked airflow, binding mechanisms, shorted components) to prevent repeat failures

This part fixes the following symptoms
  • Not dispensing water
See more...
Do-It-Yourself Stories from Customers like You Water dispenser quit working   Frank K. • Pass Christian , MS • February 20, 2017

I replaced the switch which was bad and also replaced the water inlet valve. Read more

More
$49.51
Compare At:
$58.42
You Save:
$8.91

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Water Level Switch (5-Position Rotary)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001656

This is the washer's water level switch that senses tub level via air pressure and provides five selectable fill settings. Replacing a failed switch restores accurate filling and lets the cycle advance properly through wash, rinse, and spin.

  • Monitors air pressure from the tub to detect actual water level
  • Controls the inlet valves to start/stop filling at the selected setting
  • Signals the timer/control to begin agitation and advance the cycle once full
  • Common symptoms: overfilling or water keeps running, stops filling too soon or won't fill, inconsistent water levels, cycle won't advance due to incorrect level detection
What's included: 1 water level pressure switch with 5-position rotary selector Install notes:
  • Disconnect power and turn off water supply before servicing
  • Access the control console; remove the selector knob/dial and panel as needed
  • Note wire locations (take a photo), move the harness, and transfer the pressure hose; ensure the hose is clear and firmly seated
  • Securely mount the new switch, reassemble the console/knob, restore utilities, and test each fill level

Do-It-Yourself Stories from Customers like You Water level in Maytag washer was always high and was not adjustable   Von D. • San Bernardino , CA • December 21, 2017

Replaced the water level switch and water level pressure switch hose. Video on AppliancePartsPros.com detailed the procedure. Read more

More
$127.65
Compare At:
$150.63
You Save:
$22.98

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Range Surface Burner Infinite Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9763761

If your range burner won't heat, cycles incorrectly, or buzzes when turned on, a faulty infinite switch is likely the cause. Moderately easy DIY repair.

Do-It-Yourself Stories from Customers like You Stems were broken on handles. Knobs didn't work correctly.   Dan R. • Glendale , CA • May 06, 2020

Had to replace both switches. The hard part was getting the control panel off to get access. Only a few screws but even after getting them out, really struggled getting it off. After getting off, discovered that you need to get it lifted up before pulling it off. Read more

More
$142.95
Compare At:
$170.11
You Save:
$27.16

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Dishwasher Door Interlock Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10274880

Fix a dishwasher that stops mid-cycle with a blinking start light. This door interlock switch restores reliable operation. 20-minute DIY repair.

Do-It-Yourself Stories from Customers like You Kenmore ultra wash dishwasher worked great for 18 months; then would not run start button blinked 3 times and nothing happened   Nick C. • Safety Harbor , FL • November 12, 2015

Looked online, appeared to be door switch or control panel. Tried door switch first, a $30 part. Installed new door switch and washer started right up and appears to be fixed. Have not tried full wash cycle yet, but problem appears to be fixed. I decided to buy part from AppliancePartsPros.com because I could return the part if it did not correct the problem, no one else offered such a deal. I will only deal with AppliancePartsPros in the future, they were extremely helpful on the phone! Read more

More
$50.57
Compare At:
$59.67
You Save:
$9.10

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Switch
Genuine Frigidaire part
By: Frigidaire
Part Number: 318394803

Has three terminals.

Do-It-Yourself Stories from Customers like You Oven light stayed on when door was closed   Robert S. • Jacksonville , IL • June 14, 2015

When trouble shooting the problem I found that the light switch housing outer lip was broken allowing the switch to push through mounting surface behind the oven door. This is a slide in range so, I proceeded to pull the range away from the counter where I could unplug the power cord. Once the power was off like located the panel on the right upper side of the unit and removed the screws to allow access to the switch. I then unplugged the switch from the wiring harness and removed the damaged... Read more

More
$53.95
Compare At:
$64.74
You Save:
$10.79

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Range Infinite Switch
Genuine Ge part
By: Ge
Part Number: WB24T10139

Burner stuck on or won't turn off? This infinite switch restores precise heat control to your surface element. Takes about 20 minutes to replace.

Do-It-Yourself Stories from Customers like You Ge profile slide in stove frt/right burner stuck "on" (would not turn off) 5 days before thanksgiving   Dwight D. • Modesto , CA • November 26, 2016

Found best price for replacement switch at @ AppliancePartsPro. But took another day to find procedure on how to replace. Ordered switch on Mon before 5:00pm and & paid for 2nd day delivery. Got email from FedX, delivery not scheduled until Fri 29th. Wife was upset; but I got lucky: it showed up Wed afternoon. Took 20 minutes to replace. Read more

More
$96.34
Compare At:
$113.68
You Save:
$17.34

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Dryer Temperature Switch
Genuine Ge part
By: Ge
Part Number: WE4M411

Dryer won't heat or overheating? The temperature switch controls heat settings. DIY-friendly repair—just swap wires and reassemble. Takes 20 minutes.

Do-It-Yourself Stories from Customers like You The timer was sticking to the point where the knobs were stripping out   Peter A. • Dallas , OR • December 16, 2014

I unscrewed the 3 Phillips screws on the back of the dryer controls housing, then it folds forward for access to each control switch. the old one popped out, and I swapped the wires using a needle nose pliers, one by one, from the old switch to the new switch. The part was an exact fit, and popped right back into the housing. I screwed the 3 screws back in, pushed on the new knob, and it looks and works like new ! Read more

More
$64.70
Compare At:
$76.35
You Save:
$11.65

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Dryer Temperature Selector Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3399640

Dryer won't heat or overheats on low settings? A faulty temperature selector switch prevents proper heat control. Easy DIY fix in 10-15 minutes.

Do-It-Yourself Stories from Customers like You My kenmore dryer was not gnitind so therefore no heat also my washer was leaking under the machine   Bill K. • Midland Park , NJ • November 24, 2014

THE WSHER WAS EASY BECAUSE THE DRAIN PUMP HAD TWO PENNIES INSIDE IT AND THEY CRACKED THE HOUSING.EASY FIX REPLACING THE DRAIN PUMP. WORKS LIKE A CHARM. DRYER WAS A BIT MORE WORK.I CHANGED THE IGNITER FIRST WITH YOUR ADVICE. STILL NOTHING. I THEN CHANGED THE COIL VALVE KIT. NO LUCK. NEXT WAS THE TEMP SWITCH ON THE PANEL. STILL NO GOOD.FINALLY THE THERMAL FUSE WAS RECOMMENDED. I WAS ABLE TO PURCHASE ONE LOCALLY AND IT WORKED . GREAT RELIEF.THANKS FOR ALL THE HELP AND RECOMMENDATIONS. YOUR... Read more

More
$62.61
Compare At:
$73.88
You Save:
$11.27

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Laundry Center Cycle Selector Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10285512

Fix erratic or unresponsive cycle selections with this laundry center rotary encoder switch. Mounts behind the cycle knob to restore accurate settings.

Do-It-Yourself Stories from Customers like You Temperature control switch failed to cold only.   Marilyn M. • Summerfield , FL • September 30, 2017

Replaced with a new one. Read more

More
$83.44
Compare At:
$99.29
You Save:
$15.85

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store
​