Power Strike Small Engine Start Switch Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 903136-9020
Burner won't turn off or stuck on high heat? This infinite switch controls surface burner temperature settings. DIY-friendly, 30-minute repair.
Do-It-Yourself Stories from Customers like You
Burner was hard to turn on/off and almost impossible to adjust Clark A. • Austin , TX • September 01, 2014
The problem seemed to be with the switch so I watched a few youtube videos to learn more about how ranges work. After locating the correct replacement switch I ordered it on-line around 10 pm Tuesday night. The new switch arrived Thursday morning at about 10 am and I had my range back up and working like new in less that 30 minutes.
The hardest part was figuring out how to remove the slide in panel to access the switch. There were plastic washer/nuts behind each know which I was able to...
Read more
More
Genuine Lg part
By: Lg
Part Number: 6600W1K001C
This is a micro switch that detects whether the microwave door is properly closed and latched. It is part of the safety interlock system that prevents the microwave from operating with the door open. Replace this switch if the microwave does not start when the door is shut, runs with the door open, blows a fuse when the door closes, or stops mid-cycle intermittently.
Do-It-Yourself Stories from Customers like You
Interior light and turntable failed at the same moment. Stacey B. • New Bern , NC • February 01, 2021
Knowing the odds of 2 failures occurring at the same exact time was unusually high, I just searched your site for what other broken items might affect these two failures. Came up with next control item upstream and tallied that item failure with percentages of successful repairs, (4 mins.) door safety switch.
Since I had to change out the most likely of the 3 and since I was already was going to be into the switch panel I ordered all 3 and swapped them all out to cover my butt, as they were...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11188327
Fix a washer that won't start or spin due to lid lock failure. This lid lock assembly prevents opening during cycles. DIY repair in about 45 minutes.
Do-It-Yourself Stories from Customers like You
Shut off. No water. Lid did not lock. Francis H. • Lutts , TN • February 14, 2021
Replaced lid switch
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 318191023
If your dual burner stays on low and won't turn off, or the small element doesn't heat, this infinite switch may need replacing. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Large element was very erratic on temperature low/high. Rodney C. • Lake Wales , FL • March 01, 2018
Replaced the infinite, dual, switch. Very good instructional video for Safety, removal * install.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8181651
Fix DL error codes and doors that won't stay shut with this washer door strike. Works with the door lock assembly. Easy 30-minute DIY repair with video.
This part fixes the following symptoms
-
Lid or door will not open
-
Lid or door won't close
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Drum spider support broken Debbie E. • Elizabethton , TN • February 14, 2015
New inner drum and front and rear outer drum; although other parts worked, still replaced the bellow and clamp, new door latch, and cleaned the hoses. Washer works great. Just like brand new. Even though matching dryer works, I am going to clean it up and replace some parts on it also.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002125
If your dual burner only works on high or won't heat at all, this dual infinite switch kit restores full temperature control. Moderate difficulty install.
Do-It-Yourself Stories from Customers like You
Range dual surface unit would only go on in "high" setting not on any other settingsje Kenneth C. • Tolland , CT • July 28, 2015
Replace dual infinity switch. The only difficulty is the terminal labels on the new switch did not match at all with the terminal labels on the original switch. The enclosed instructions were NOT helpful. But I contacted your representative, Johnny, and he was most helpful and patient. From my model number he located very specific and detailed instructions for how to wire the new switch. The rest of the job was easy. Your representative was outstanding. Thanks.
Read more
More
Genuine Speed Queen part
By: Speed Queen
Part Number: D510523
Fix dryer overheating issues with this thermistor assembly. Monitors temperature and sends readings to the control board. DIY-friendly repair part.
More
Genuine Ge part
By: Ge
Part Number: WB24T10145
Burner won't turn off or stays on high? This range surface element switch controls heat output. Easy DIY repair—most install in 5-10 minutes.
Do-It-Yourself Stories from Customers like You
Burner won't turn off Philip T. • Bridgeton , NJ • September 24, 2018
Installed new switches. Done in 20 minutes.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10244639
Burner stuck on high or won't heat? This infinite switch controls cooktop element temperature. Common DIY repair taking 30-60 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
The burner on a Whirlpool cook top went to high heat and stayed there once the knob was turned on for the burner. Turning the knob to a lower setting did not lower the heat Jim W. • Houston , TX • June 17, 2019
Had to replace the switch for the left rear burner on a Whirlpool cooktop Model W5CE3625AB00. I turned off the circuit breaker for the cooktop and lifted it out of the countertop. It was simply held down by its own weight. There were approximately a dozen screws holding the smooth surface down onto the rest of the unit. I removed those screws, which allowed the cooking surface to lift back on a hinge in the back of the unit. Two of those screws were stripped, but I was able to remove them...
Read more
More
Genuine Lg part
By: Lg
Part Number: 4027EL1001A
If your dryer door pops open during cycles or won't stay closed, this door latch assembly restores a secure closure. Easy 5-minute DIY repair.
Do-It-Yourself Stories from Customers like You
My lg dryer latch assembly was broken so i order new one much better thank you Michael W. • Hillsboro , OR • April 19, 2014
I just simply just take 2screws off and remove old latch off and replace new latch on. This is easy not that hard.
Read more
More
Genuine Ge part
By: Ge
Part Number: WH12X10065
Fix a washer that overfills or won't start the wash cycle. This water level pressure switch detects proper fill levels. DIY-friendly repair.
This part fixes the following symptoms
-
Will not fill with water
-
Will not stop filling with water
See more...
Do-It-Yourself Stories from Customers like You
Bad switch Daniele H. • Milford , CT • February 12, 2015
Hmm...watched video after reading on web of running water problem with GE washer....common fail
.....moving stuff to get to the washer took all the time, easy fix but a lot of screws to remove and looking time
APP site very good, will order again if need be thanks
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3406108
The Door Switch is an OEM part for Whirlpool dryers. It is responsible for detecting whether the dryer door is open or closed. When the door is closed, the switch allows the dryer to operate. Conversely, if the door is open, the switch interrupts the electrical circuit to prevent the dryer from running, ensuring safety during use.
You should replace the door switch if it becomes faulty. Causes of a bad door switch can include wear and tear from regular use, electrical failures, or physical damage from repeated opening and closing of the dryer door. A malfunctioning door switch can prevent the dryer from starting or cause it to stop mid-cycle.
Symptoms of a bad door switch include:
- The dryer not starting or responding when the door is closed
- The dryer stopping mid-cycle without reopening the door
- The dryer continuing to run when the door is opened
- Error codes related to the door switch or door lock mechanism
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken door switch and lint filter cover Christopher W. • Collierville , TN • December 14, 2014
Plug and play minus a few screws to remove, simple repair.
Read more
More
Genuine Ge part
By: Ge
Part Number: WD21X23498
The Flood Switch is an OEM part for GE dishwashers. This critical component detects and prevents potential overflows by monitoring water levels within the dishwasher. When excessive water is detected, the flood switch signals the dishwasher to shut off water flow, preventing leaks and potential water damage.
Causes of a bad flood switch can include electrical failures, physical damage from debris, or wear and tear from repeated use. If the flood switch malfunctions, it may not properly detect water levels, leading to possible overflows or improper operation of the dishwasher.
Symptoms of a bad flood switch include:
- The dishwasher stopping mid-cycle
- Water not filling or overfilling the dishwasher
- Error codes related to water level issues
- Leaks around the dishwasher
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The dishwasher was not draining water. Sanford S. • Jericho , NY • January 23, 2022
Spoke to an appliance repairman who said it does not pay to fix and is too difficult
I had already ordered the parts.
So I called AppliancePartsPros.com.
They said no problem if I wanted to return parts
BUT the technician suggested that all appliances are repairable
I gave it a shot
I had to disconnect the dishwasher, same as if I was to replace it
Followed on AppliancePartsPros.com repair parts video and replaced the pump, inlet valve, and solenoid
all took about an hour and the dishwasher...
Read more
More
Genuine Bosch part
By: Bosch
Part Number: 00612148
Washer won't start or door won't lock? This door lock assembly secures the door during cycles. DIY-friendly repair, typically takes 15-30 minutes.
Do-It-Yourself Stories from Customers like You
Washer lock broken Arun P. • Burbank , CA • November 14, 2015
Disconnect existing part and connect new one. Disconnect involved removing back cover around lock and electrical connector. Also had to remove rubber gasket.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB24T10022
Burner not heating or stuck on? This surface element switch controls power to your cooktop burners. Common repair when heat won't adjust properly.
Do-It-Yourself Stories from Customers like You
Burner didn't work Larry W. • Aiea , HI • March 23, 2014
Replaced the switch infin by watching the video
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3395382
The Start Switch is an OEM replacement part for Whirlpool dryers. It is an electronic component responsible for initiating the heating elements and tumble cycles upon user command from the control panel.
Causes of a bad start switch involve general wear over extended use. Failure of the internal conducting surfaces interrupts circuit activation as well.
Symptoms of a bad start switch include:
- Heating elements or tumble cycles that will not engage properly
- Dryer fails to operate or stops mid-cycle unexpectedly
- Control panel appears non-responsive to selections
- Error codes related to ignition or power delivery faults
Note: This dryer push-to-start switch has 2 terminals.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore electric dryer models.
Do-It-Yourself Stories from Customers like You
Dryer wouln't start heard the timer working but the starter wouldn't start Perry B. • Stockton , CA • December 05, 2014
I replaced the starter switch, that really didn't need to be replaced, and the thermal fuse, which did.
Read more
More