Need Help?
Call
Creates an airtight seal to maintain proper temperature and keep food fresh. Replace if torn, leaking air, or not sealing properly. Confirm fit with model.
Ordered replacement gasket. Old one was removed bybgrabbing a corner and pulling. It is a simple push in gasket. No disassembly of the door required. No tools other than my fingers needed it install the new gasket. Quick and easy. Read more
This foam seal fits between mating parts to create a tight barrier that helps prevent leaks and rattling. Replacing a worn or missing seal restores proper sealing and helps keep your appliance running quietly. What it does:
I have a 10 year old Kitchenaid double oven with warming drawer below and electrical connection is located in cabinet below. I order a service manual from http://www.allrepairmanuals.com. If you have the service manual follow it, it walks a technician thru each step. If you don't have a manual here are a few highlights. Disclaimer the following is for my oven model KEBS208DBL8, your oven service steps may vary. IMPORTANT! First step turn-off the power to the oven (mine was a 40 amp breaker)... Read more
Horizontal oven door seal for top and bottom edges. Replace when worn to restore even heating and efficient baking. Hooks into slots on door frame.
A new ignitor was installed, and a new light switch was installed Read more
Seals the water manifold duct nozzle connection in your dishwasher. Replace if you see leaking at the spray arm tower or poor cleaning. Verify fit.
Since my Samsung Dishwasher would not drain and had a flashing quick light, I removed the racks and both spray wands. Which allowed me to remove the lower screen assembly. This revealed a worn and broken check valve and broken grinder blade. I cleaned the inside of the dishwasher and removed the unit from under the counter. I removed and cleaned the brake assembly ( large transparent plastic section on left side of the dishwasher). I cleaned this for preventive maintenance by taking the float... Read more
This is a white magnetic door gasket that seals around the perimeter of the freezer door. It creates an airtight seal to keep cold air inside and prevent frost buildup and energy waste. Replace this gasket if it is cracked, torn, warped, or no longer holding a tight seal - common signs include visible frost inside the freezer, the door not staying closed, or the compressor running more than usual.
Replace a worn door gasket to restore an airtight seal, keep cold air in, reduce frost, and improve efficiency. Verify fit with your model number.
Really simple fix no tools required. Simply pulled the old out and install the new one in . Not hard at all. Read more
Replace your worn oven door gasket to restore a tight seal, prevent heat loss, and maintain consistent baking temperatures. Confirm fit with your model number.
After watching your great video showing how to install, we ordered the product from you. Great service and an easy install!!! Thanks so much!! Read more
Seals your refrigerator door to keep cold air in and prevent frost buildup. Replace when warped or damaged to restore energy efficiency. Verify fit.
White foam door gasket seals your refrigerator freezer compartment to prevent warm air leaks and frost buildup. Replace if torn or loose. Confirm fit.
Replaced gasket took 5 minutes. Read more
Seals your freezer door to maintain temperature and prevent frost buildup. Replace if torn, cracked, or not sealing properly. Verify fit with model number.
Replace your worn oven door gasket to improve heating efficiency and prevent heat loss. Restores proper seal between door and cavity. Confirm fit by model.
I replaced the old control panel with a new one. I also changed out the door seal to help prevent the control panel from going bad a second time. It was the heat from the oven getting to the keypad on the control panel that caused it to go bad. Read more
Seals the fresh food door to keep cold air in and moisture out. Replace when worn to restore temperature control and reduce condensation. Verify fit by model.
Loosened nuts around outer flange. Pulled out old gasket as shown in video. Prepared new gasket per included instructions. Installed new gasket again using techniques shown in video. Secured nuts then confirmed proper seal. This was not a difficult repair however patience and care is needed to ensure new gasket is properly seated without damage. Read more
Creates an airtight seal between freezer door and cabinet. Replace when worn to maintain proper temperature, reduce frost buildup, and improve efficiency.
It was bad at all I was able to get it done in about 1 1/2 I had to unscrew the nuts and place new gasket and the place new gasket and put back the nuts Read more
Seals the oven door perimeter to retain heat and maintain consistent temperatures. Replace if frayed, damaged, or heat escapes. Confirm fit by model number.
First watched youtube instruction video. Ordered gasket. Delivered in 2 days. Removed old gasket and replaced with new in about 15 minutes. Wife happy. Read more
The Sealing is an OEM replacement part for Bosch brand dishwashers. Located on the perimeter of the small rinse aid compartment door, this resilient rubber piece forms an essential water-tight seal when the dispenser is closed.
Symptoms of a potentially problematic rinse aid door sealing include:
Causes of a faulty rinse aid door sealing can be repetitive opening/closing stress breaking down pliability long-term. Exposure to chemical vapors from the rinse aid may also degrade sealing properties.
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
Ordered new door and seal. They arrived in just a few days. Watched the video on this site. Snapped out the old door and snapped in the new door in about 15 seconds Read more
Replace your refrigerator door gasket to seal cold air inside and prevent condensation. Signs include visible wear or warm interior. Confirm fit by model.
I called Appliance Parts Pros and gave them the model number of my refrigerator. They promptly advised me exactly what part I needed, told me the price and cost of shipping. I agreed and received my part within 2 days. I watched the video that told me exactly how to complete repair. It was very simple. The only thing different was that there was a metal strip holding the gasket in place. Removing it was no problem. When I installed it I had to loosen the screws? nuts? slip the gasket... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.