Water Temperature Sensor Parts
Genuine Lg part
By: Lg
Part Number: 4930EL2003B
This is a mounting holder or grille that secures the moisture sensor bars inside the dryer drum area. The moisture sensor detects how wet the clothes are and signals the control board to end the cycle when they're dry. Replace this holder if it is cracked, broken, or missing, which can cause the sensor bars to be misaligned and lead to clothes coming out still damp or the dryer running too long.
Do-It-Yourself Stories from Customers like You
Sheets broke cover guide with filter and sensor Stefan H. • Ponte Vedra Beach , FL • March 15, 2019
I have order three parts, guide filter, cover guide, and sensor assembly. My previous cover guide was from two parts, when sensor assembly was one of them. New part ( guide cover ) was all in one piece so I just transfer old metal part of sensor to new cover guide and I don't need that sensor assembly anymore. I have ordered all three parts overnight by Fedex, ordered 15 min before 5pm, so next day it was here.
Dryer is fixed, I'm happy.
Read more
More
$29.48
- Compare At:
-
$34.79
- You Save:
-
$5.31
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3404154
Dryer not heating or shuts off after a few minutes? A faulty thermostat often causes temperature regulation failure. Easy DIY fix with a multimeter test.
Do-It-Yourself Stories from Customers like You
Whirlpool Thin Twin mod LTE5243DZ2 dryer ran but was not creating heat David G. • York Springs , PA • July 17, 2019
I checked the continuity on the thermal fuse (which was blown) and knew that it needed to be replaced. This made me question why it blew (i.e. what caused it to fail). I checked continuity on the thermostat (high limit) as well as the thermostat for the element. Both passed a continuity test, so I removed the high limit thermostat to inspect it and could hear it rattling inside. This leads me to believe the spring inside had failed, so I replaced this thermostat as well. Put it back...
Read more
More
$63.65
- Compare At:
-
$75.11
- You Save:
-
$11.46
Genuine Ge part
By: Ge
Part Number: WR50X29776
Fix ice buildup on evaporator coils with this defrost thermostat. Monitors coil temperature to signal defrost cycles. Test for continuity when frozen.
More
$48.34
- Compare At:
-
$57.04
- You Save:
-
$8.70
Genuine Whirlpool part
By: Whirlpool
Part Number: W10842407
Fill and drain hose assembly for portable dishwashers. Connects unit to sink faucet. Replace if coupler leaks, hose cracks, or connections loosen.
Do-It-Yourself Stories from Customers like You
The fill and drain hose needed to be replaced Dawn H. • New Buffalo , MI • December 01, 2014
We replaced the whole unit.
Read more
More
$135.51
- Compare At:
-
$161.26
- You Save:
-
$25.75
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2321800
Freezer icing up and not defrosting? This defrost thermostat monitors evaporator temperature to trigger defrost cycles. Located behind freezer wall.
Do-It-Yourself Stories from Customers like You
The fridge was not cooling and the freezer not freezing Richard C. • Chesterfield , VA • August 18, 2015
Took everything out and transferred it to coolers etc. Unscrewed and took freezer unit apart ..Evaporator fan not working and made decision to replace motor and bi metal defrost thermostat. Order parts from Appliance Pros. com and the unit was put back together and so far it corrected the problem. The instructions and service were outstanding. Great Company.
Read more
More
$49.51
- Compare At:
-
$59.41
- You Save:
-
$9.90
Genuine Whirlpool part
By: Whirlpool
Part Number: WP53-1182
Dryer won't start or has no power? A blown thermal fuse is the likely cause. This safety device cuts power when overheating occurs. DIY fix.
Do-It-Yourself Stories from Customers like You
Our Maytag gas dryer was not producing heat— specifically it was cycling off after initially lighting Timothy E. • Bellvue , CO • September 15, 2019
When I pulled out the dryer from the wall, I could see dust/lint had accumulated everywhere and the vent system was compromised. I vacuumed up the dust/lint accumulation outside and then inside the vent system. I then opened the lower cabinet to clean and check its condition. I removed the water steamer bottle and its sub-assembly and then the drum. After cleaning and inspecting components — both visually and with a multi-meter I determined the problem was the appliance doing what it was...
Read more
More
$42.95
- Compare At:
-
$50.68
- You Save:
-
$7.73
Genuine Whirlpool part
By: Whirlpool
Part Number: W11381654
The Drain Hose is an OEM part for Whirlpool dishwashers. It serves as the connection that allows dirty water to exit the dishwasher tub and flow into the water drain system after each wash cycle. The hose transports wastewater from inside the dishwasher out through the standpipe.
Causes of a bad drain hose can include mineral or food debris buildup blocking water flow within the hose, cracks or breaks in the plastic material from repeated bending, or a loose or damaged hose clamp connection.
Symptoms of a drain hose failure include:
- Standing water remaining in the bottom of the tub after a cycle
- Puddles or leaks developing near or underneath the dishwasher
- Water failing to properly drain during the designated drain portion of cycles
- Kinks or sagging appearing in the hose affecting water drainage
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
More
$28.43
- Compare At:
-
$33.83
- You Save:
-
$5.40
Genuine Whirlpool part
By: Whirlpool
Part Number: WPM0805101
Microwave won't turn on or has no power? A blown fuse is often the cause. This safety component protects against electrical surges and short circuits.
Do-It-Yourself Stories from Customers like You
Microwave had no power and no lights Matthew H. • Rocky Hill , CT • October 25, 2016
I have a Jenn-Air microwave that didn't turn on and had no lights. It just stopped working completely. I unplugged the unit and had to remove the rear cover using a *security screw kit* that prevents people from opening the rear panel. Once opened, I removed the fuse and testing it with an OHM reader to determine that the fuse went bad. But I also had to determine why the fuse blew and noticed a sticky oily substance under the Capacitor. I used a rubber glove and needle nose pliers to...
Read more
More
$8.95
- Compare At:
-
$10.65
- You Save:
-
$1.70
Genuine Frigidaire part
By: Frigidaire
Part Number: 242294402
Bypass cap allows your refrigerator to operate without a water filter. Install when using external filtration or to restore water flow. Verify fit.
Do-It-Yourself Stories from Customers like You
Order and replace frigidaire water with a bypass water filter part Elias G. • Portage , IN • December 21, 2014
It was a snap, literally. Snapped out the old water filter and snapped in the new water filter bypass, that simple.
Read more
More
$81.95
- Compare At:
-
$97.52
- You Save:
-
$15.57
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10258149
Supplies water to the spray arm in your dishwasher. Replace if cracked, damaged, melted, or leaking. Installs between the manifold and upper spray arm.
Do-It-Yourself Stories from Customers like You
The water parts were broken the washer is about 16 years old Katrina M. • Fontana , CA • July 14, 2018
We bought replacement parts from you and my daughter fixed it. It is working now. It would have been nice if all the parts came in a set.
Read more
More
$50.57
- Compare At:
-
$60.18
- You Save:
-
$9.61
Genuine Bosch part
By: Bosch
Part Number: 00361113
Hose, with o - ring, shu (uc/12 & above)
This Sump to Float Hose is an OEM part for Bosch Dishwashers. It functions to carry water from the dishwasher sump to the float assembly. Continuous water flow and exposure to detergents can lead to wear or damage over time.
What Causes a Bad Sump to Float Hose:
Exposure to chemicals and hot water, along with wear from water flow, can cause the hose to degrade or develop cracks.
Symptoms of a Bad Sump to Float Hose:
- Water leakage around the dishwasher
- Incomplete or interrupted washing cycles
- Visible cracks or damage to the hose
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
Do-It-Yourself Stories from Customers like You
Low water pressure / arms not spinning Wilbur C. • Washington , DC • October 13, 2014
Used vids on youtube for steps on how to disassemble and install the pump; search "Bosch dishwasher circulation pump replacement". Also on AppliancePartsPro forums, a poster put up the Bosch "Dishwasher Service Training Manual" in .pdf. Search "Bosch dishwasher low pressure" on the forum. It's one of the post with the longest thread.
Six pointers.
1. In another forum post, the poster noted that some hoses were brittle with age - and cracked when reinstalling. I had same issue (my washer is...
Read more
More
$15.71
- Compare At:
-
$18.69
- You Save:
-
$2.98
Genuine Bosch part
By: Bosch
Part Number: 00627375
Fix a range that won't reach set temperature or shows temperature error codes. This sensor monitors oven heat and signals the control board to adjust.
Do-It-Yourself Stories from Customers like You
Small oven would not hold the set temperature Frank B. • Port Richey , FL • December 01, 2019
Replaced the bake element. The manufacturer did not leave enough wire to pull the connections into the oven so I had to open the back and locate the connections.
Read more
More
$121.57
- Compare At:
-
$145.88
- You Save:
-
$24.31
Genuine Ge part
By: Ge
Part Number: WE4M160
Hi-limit thermostat. L210.
Do-It-Yourself Stories from Customers like You
Low heat Larry S. • Parrish , FL • January 21, 2016
Ordered a new safety thermostat. Installed it in 10 minutes and good as new.
Thanks for your great trouble shooting and fast parts the repair was a breeze.
Read more
More
$127.46
- Compare At:
-
$152.95
- You Save:
-
$25.49
Genuine Whirlpool part
By: Whirlpool
Part Number: WP307250
Dryer runs but won't cycle off or cycles too frequently? A faulty cycling thermostat may be the cause. This common repair takes 30-45 minutes.
Do-It-Yourself Stories from Customers like You
Auto dry wouldn't shut off on maytag dryer Donald G. • Auburn , NY • September 11, 2017
Replaced timer and cycling thermostat. cycling thermostat was the problem. For some reason it wasn't getting the message to the timer needed to cycle the dial.
Read more
More
$63.65
- Compare At:
-
$75.74
- You Save:
-
$12.09
Genuine Ge part
By: Ge
Part Number: WR50X55
Freezer icing up or fridge not cooling? The defrost thermostat regulates defrost cycles. DIYers report straightforward replacement in under an hour.
This part fixes the following symptoms
-
Freezer not defrosting
-
Freezer section too warm
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Freezer iced up behind panel refrigerator not cooling Lisa S. • Camanche , IA • October 08, 2016
Ordered a ge thermostat part . Took everything out of freezer , unscrewed panel and took the plate out. Used a hair dryer to defrost ice. Took out old part and installed new part. Everything is working just fine!!! Used a meter to test old/bad part and indeed it was dead.
Read more
More
$15.95
- Compare At:
-
$30.42
- You Save:
-
$14.47
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3387137
This internal-bias thermostat regulates dryer drum temperature by cycling the heat on and off, helping maintain consistent drying performance and protect against overheating.
- Controls the cycling temperature of the heating circuit to prevent underheating or overheating
- Helps resolve symptoms like no heat, not enough heat, long dry times, or temperature swings
- A faulty thermostat may cause overheating that can trip the thermal fuse
- Located on the blower housing on many models
What's included: 1 internal-bias thermostat Install notes:
- Disconnect power and shut off gas (for gas dryers) before servicing
- Access the blower housing; note wire positions and transfer one at a time
- Mount the thermostat flush to the housing for proper sensing
- After installation, run a test cycle to verify proper heating
Do-It-Yourself Stories from Customers like You
Thermal fuse blew John P. • Palm Coast , FL • January 02, 2016
Cleaned exhaust duct, but only from the dryer/laundry room side. Replaced thermal fuse. Unit worked for about two loads and thermal fuse blew again. This time I cleaned the exhaust vent on the roof of my 2-story house. It was found to be partially obstructed and I was able to remove a significant amount of lint from it. Also, I researched the problem and followed someone's advice to replace the cycling thermostat together with the thermal fuse if the thermal fuse blows. So far it has been...
Read more
More
$62.61
- Compare At:
-
$73.88
- You Save:
-
$11.27