Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Band Fin Parts

Best Seller
Compression Ring
Genuine Ge part
By: Ge
Part Number: WH02X10093

The Compression Ring is an OEM part for GE washing machines. This ring is essential for securing the tub within the washing machine, ensuring it remains in place during the wash and spin cycles. It helps maintain the stability and proper function of the washing machine.

You should replace the compression ring if it becomes worn, cracked, or damaged. Causes of a bad compression ring can include frequent use, high-stress loads during wash cycles, or physical damage, which can lead to instability and poor washing performance.

Symptoms of a bad compression ring include:

  • Excessive shaking or movement of the washing machine during cycles
  • Unusual noises during operation
  • The washing machine tub appearing misaligned or loose
  • Ineffective washing due to instability

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You The timer switch came detached from the bracket and the dial slot slipped out of the shaft until i saw the repair video i did not know about the clip that locks the dial to the shaft   Jeffery B. • Donalsonville , GA • September 04, 2015

I removed the dial knob and plate as instructed by the video, removed the front panel of the washer to access the switch. I found the plastic molded bracket that the timer rests on to be broken and the tab on the timer where it is attached by a screw to be broken. I ordered a replacement switch, dial and knob. When it arrived I replaced the parts as instructed, but I had to use super glue to hold the new switch in place due to the support tab on the washer panel being broken off. After letting... Read more

More
$18.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Washer Drum Baffle
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10283356

Replacement drum baffle for washers. Clips onto the inner tub to direct water flow. Needed when original is cracked, broken, or clips have sheared off.

Do-It-Yourself Stories from Customers like You One of the 3 baffles in our washer's tub broke and fell out   Garrett O. • Friday Harbor , WA • December 15, 2014

Rather than call a repairman, I looked on line to get a replacement part. AppliancePartsPros.com had clear diagrams of the washer's major subassemblies from which it was easy to identify the broken baffle. AppliancePartsPros.com offered the part at the lowest price I could find online. That price seemed very high for a simple piece of plastic, but I know no alternative way to fix the problem. i ordered the part. It came in a couple of days when I was not home. My wife told me by phone that the... Read more

More
$58.43

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Washer Hose Clamp
Genuine Frigidaire part
By: Frigidaire
Part Number: 134616300

Secures hoses and boots to pumps and tubs, preventing leaks. Replace if damaged, rusted, or unable to tighten. Confirm fit with your model number.

Do-It-Yourself Stories from Customers like You E21 water not pumping out fast enough (eiflw55hmb washer)   Helmut D. • Rancho Palos Verdes , CA • April 20, 2020

Replaced pump. All components are accessible from the front of the machine. You have to remove two screws in the back that hold on the top cover, then slide the cover back. This will allow access to the screws that hold on the control panel. Remove the control panel (unplug cable), then remove the spring/wire that holds on the door bellows to the front panel (removing and installing that is the most difficult part of the job) and carefully remove the bellows from the front panel. Then remove... Read more

More
$47.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Hose Clamp
Genuine Whirlpool part
By: Whirlpool
Part Number: WP285655

The Hose Clamp is an OEM part for Whirlpool washing machines. This clamp secures the hose in place, ensuring a tight connection and preventing leaks during operation. It is essential for maintaining the integrity of the washing machine's water system, securing hoses that carry water to and from the washer.

Common causes of a bad hose clamp include rust, physical damage, or loosening from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

  • Water leaks around the hose connection points
  • The hose slipping off the fitting
  • Visible rust or wear on the clamp
  • Difficulty in tightening the clamp to secure the hose

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

This part fixes the following symptoms
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You Syphonbreak was leaking   James O. • Bryant , AL • September 04, 2015

We ordered parts from appliance parts pros and I fixed it. Read more

More
$9.63

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Dryer Blower Wheel Clamp And Screw Kit
Genuine Ge part
By: Ge
Part Number: WE1X688

Secures the blower wheel to the motor shaft. Replace when the wheel loosens or moves, causing rattling or rubbing noise. Includes clamps and screw.

Do-It-Yourself Stories from Customers like You Blower fan had come loose and was hitting the inside of the housing   Chris R. • Ridgeland , MS • February 08, 2015

Had to remove the front and top panel on the dryer, disconnect the belt and remove the drum. From there it was two screws to slide out the motor assembly with the fan attached and one bolt to remove the clamp and screw kit holding the fan in place. They kit was worn and was allowing the fan to move forward and back on the motor shaft. Once replaced it took about 5 minutes to reassemble and my dryer now purs like a kitten. Read more

More
$18.52

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Dryer Drum Baffle
Genuine Ge part
By: Ge
Part Number: WE13X29725

This dryer drum baffle installs inside the rotating drum to help tumble clothes efficiently. Replace if cracked, broken, or missing for proper operation.

Do-It-Yourself Stories from Customers like You Drum baffles broke off due to sheets wadding up in a tight ball and knocking around the drum   Paul L. • Conroe , TX • April 13, 2026

Removed the front panel and the top cover. Disconnected the interface. Unscrewed the baffle screws from the drum and pieces of broken baffle. Replaced baffles and reassembled dryer. Read more

More
$27.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Washer Door Boot Seal Clamp
Genuine Ge part
By: Ge
Part Number: WH01X10279

Secures the door boot seal to prevent water leaks in front-load washers. Replace if rusted, broken, or boot becomes loose. Verify fit with your model.

This part fixes the following symptoms
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You Leaking rubber gasket GE washer model no: wpdh8800j3mg   Michael C. • North Truro , MA • January 22, 2024

I replaced the following parts in the GE WASHER that I have owned for approximately 14 years: Part no.: WH08X10038 - rubber gasket Part no.: WH01X10277 - inside gasket clamp Part no.: WH01x10279 - outside gasket clamp The two gasket clamps were ordered on 1/18/24 and delivered the next afternoon to my front door. I already had the replacement rubber gasket from a long time ago. I will mention that I have NEVER tried replacing a part on a major appliance. Since the washer machine is 14 years... Read more

More
$30.54

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Hose Clamp
Genuine Lg part
By: Lg
Part Number: 4861FR3068A

The Clamp is an OEM part for LG washing machines. It is used to secure the hose connections within the washer, ensuring that water flows correctly without leaks.

Over time, the clamp can become worn or damaged due to repeated exposure to water, vibration, or general wear and tear. If the clamp fails, it can lead to water leaks or hoses becoming detached.

Symptoms of a bad clamp include:

  • Water leaking from hose connections
  • Hoses coming loose or detaching during operation
  • Visible rust or damage on the clamp
  • Poor water flow or pressure issues

This OEM LG part is also compatible with Sears/Kenmore models.

Do-It-Yourself Stories from Customers like You Bad bearings seal and spider   David R. • Jacksonville , FL • February 04, 2017

If your LG Front load washers sounds like a freight train, STOP USING IT. You're doing more damage and will need more parts to fix it. After the noise became unbearable, I began to explore and disassemble. I knew enough to know the bearings must be bad but had never done this repair before. ( I am however pretty mechanically inclined.) Watch this video before you start tearing your LG apart. APP did a great job explaining the steps of the repair. Do a search on this site or youtube.com with... Read more

More
$13.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Washer Drum Baffle
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10597205

Replacement washer drum baffle that lifts and moves clothes during the wash cycle. Needed when original baffle is cracked, broken, or missing.

Do-It-Yourself Stories from Customers like You Baffle broke off.   Dan W. • Lakin , KS • December 30, 2019

This was a simple fix since mine didnt need any screws. Slipped in and locked into place. Read more

More
$59.48

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Washer Suspension Spring Holder
Genuine Lg part
By: Lg
Part Number: 4930FR3040A

Supports suspension springs that stabilize the washer drum, reducing vibration and noise during operation. Replace if drum shakes excessively or hits sides. Verify fit with your model number.

Do-It-Yourself Stories from Customers like You Lg washer was rocking really badly and the drum was hitting the sides during every spin cycle and even coming off the top spring mount   Benjamin M. • Lynchburg , VA • January 18, 2016

Replaced all three dampers and then replaced locking gaskets for the top spring mounts for the drum, replaced the old feet pads I had and works like a charm! Read more

More
$13.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Igniter Mounting Clip
Genuine Bosch part
By: Bosch
Part Number: 00189322

The Igniter Mounting Clip is an OEM part for Bosch ranges. It secures the igniter to the range top, ensuring it is properly aligned and stable for optimal ignition performance. The surface igniter is crucial for the ignition of gas burners, facilitating an immediate and safe flame to cook with.

Over time, the Igniter Mounting Clip can succumb to various forms of wear and tear, including corrosion from exposure to moisture, degradation from frequent heating cycles, or physical damage during cleaning or maintenance activities. 

Symptoms of a compromised Igniter Mounting Clip include:

  • The surface igniter becoming loose or dislodged
  • Difficulty in igniting the burner or uneven flames
  • Noisy or irregular ignition sounds
  • Visible signs of damage or corrosion on the clip

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Do-It-Yourself Stories from Customers like You Thermador gas range prg 304us left front burner inop   Richard C. • Pflugerville , TX • February 27, 2018

Symptoms: would not light & no gas smell/flow. R&R'd gas solenoid which fixed it. Other parts were in addition to primary inop burner. Read more

More
$6.42

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Washer Drum Baffle
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10250572

Replaces a cracked, broken, or missing washer drum baffle. Installs inside the wash basket to lift and agitate clothes during the wash cycle.

Do-It-Yourself Stories from Customers like You Broken baffel   Ardena G. • Lanark , IL • December 10, 2014

I called parts pro and they had my part and sent it right to me I am soooooooo happy with this company they are amazing. I only ordered 1 baffle and now I'm calling them to order the other 2 baffles. Thank you so much for your help and service. Read more

More
$56.34

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Dryer Drum Baffle
Genuine Lg part
By: Lg
Part Number: 4432EL1002A

The Dryer Drum Baffle is an OEM part for LG dryers. This baffle is attached to the inside of the dryer drum and is designed to help lift and tumble clothes during the drying cycle. 

Causes of a bad dryer drum baffle can include wear and tear from regular use, physical damage from heavy or sharp objects, or becoming loose due to vibration over time. 

Symptoms of a bad dryer drum baffle include:

  • Thumping or banging noises during the drying cycle
  • Clothes not tumbling properly, leading to uneven drying
  • Loose or rattling baffle inside the drum
  • Visible damage or breakage on the baffle

This OEM LG part is also compatible with some Kenmore models.

Do-It-Yourself Stories from Customers like You The lifter inside the dryer had come off   Amanda G. • Tomball , TX • December 29, 2019

Watched appliance parts pros YouTube video of how to get access and how to replace the broken part. Read more

More
$45.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Refrigerator Drawer Slide Clip
Genuine Frigidaire part
By: Frigidaire
Part Number: 297049500

Secures refrigerator drawers to slides for smooth movement. Replace when drawers stick, jam, or fall off tracks. Verify fit with your model number.

Do-It-Yourself Stories from Customers like You The basket of the freezer has the clip broken   Raquel O. • Seffner , FL • November 10, 2015

My husband told me about your site and he was right (one more time, lol), I looked for it, so this c/s rep ELIZABETH was so nice and patience helping me until we finally got to the right part. Then instead of 1 piece, I decided to order 10, lol. I will and I did recommend you guys better than other sites. With the price of ONE in other places, I got TEN with you, that's why I got so many. Tks very much! Read more

More
$34.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Refrigerator Evaporator Fan Motor Mounting Clip
Genuine Frigidaire part
By: Frigidaire
Part Number: 242135301

Secures the evaporator fan motor to its bracket for proper airflow. Replace if broken or missing to eliminate vibration, noise, or cooling issues.

Do-It-Yourself Stories from Customers like You S or 5 e ce later that changes to s or 5 y ce   Amritt V. • Yorkyown , VA • October 21, 2017

Walk into the kitchen on 21 Sep. Eight year old Frigidaire refrigerator appears to be short cycling, controls are nonfunctional. Unplug it for a few minutes, plug it back in, appears to return to normal function. Return to kitchen half hour 45 minutes later it's short cycling again. Panel has codes on it (S or 5 E CE, later that changes to S or 5 Y CE). Research of codes says replace main board and control board. Not sure where this main board is. 22 Sep call appliance repair. "Soonest... Read more

More
$6.76

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Refrigerator Water Line Connector Clip
Genuine Lg part
By: Lg
Part Number: 4930JA3091A

Secures water supply line connections in your refrigerator. Replace if leaking, loose, or damaged to restore proper ice and water dispenser function.

Do-It-Yourself Stories from Customers like You Two issues water in the bottom of fridge and clicking noise   Leroy B. • Colorado Springs , CO • January 19, 2015

The old filter head was broken at the supply line side connector fell out. The clicking noise eventually caused the fridge to warm up and stop cooling. The clicking was the overload relay tripping. The Start solenoid on the compressor was an Embarco TSD part 513604044. APP does not have that part nor does any else found a similar one on ebay but I ordered the PTC assembly 6749C-0014E. I removed the overload relay and capacitor from the TSD used two pieces of wire and connectors to create the... Read more

More
$10.95

IN STOCK
Ships Monday Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google